RESUMEN
CONTEXT: Discrepancies at the abutment/crown interface can affect the longevity of zirconia restorations. AIM: The aim was to evaluate the marginal and internal discrepancies (MD and ID) of zirconia copings manufactured by two milling systems with different finish lines. MATERIALS AND METHODS: Three aluminum-master-dies (h = 5.5 mm; Ψ =7.5 mm; 6Î), with different finish lines (large chamfer [LC]; tilted chamfer [TC]; rounded shoulder [RS]) were fabricated. Twenty impressions were made from each master die and poured. Sixty zirconia copings were manufactured and divided according to the factors "finish line" and "milling system" (n = 10): CAD LC = Computer-aided design/computer-aided manufacturing (CAD/CAM) + LC; CAD TC = CAD/CAM + TC; CAD RS = CAD/CAM + RS; MAD LC = manually aided design/manually aided manufacturing (MAD/MAM) + LC; MAD TC = MAD/MAM + TC; and MAD RS = MAD/MAM + RS. For MD analysis, each coping was fixed, and the distance between the external edges of the coping and the edge of the cervical preparation was measured (50 points). Using the same copings, the ID of each coping was evaluated, by the replica technique, at 12 points equally distributed among the regions (n = 10): Ray (R), axial (A), and occlusal (Occl). The measurements were performed by optical microscopy (Χ250). The data (µm) were subjected to parametric and non-parametric statistical analyses. RESULTS: For the MAD/MAM system, the "finish line" (P = 0.0001) affected significantly the MD median values (µm): LC = 251.80 a , RS = 68.40 a and TC = 8.10 b (Dunn's test). For the CAD/CAM system, the median MD values (µm) were not affected by the factor "finish line" (P = 0.4037): LC = 0.82 a , RS = 0.52 a , and TC = 0.89 a . For the ID, it was observed interaction between the finish line types and the region (P = 0.0001) and between region and milling system (P = 0.0031) (RM-ANOVA). CONCLUSIONS: The CAD/CAM system presented lower MD values, regardless the finish line. However, the MAD/MAM system showed ID values smaller than those of CAD/CAM.
Asunto(s)
Diseño Asistido por Computadora , Coronas , Pilares Dentales , Circonio/química , Adaptación Marginal Dental , Diseño de Prótesis Dental , Técnicas de RéplicaRESUMEN
This article describes a highly efficient technique to obtain articulated casts. Interocclusal recording is carried out using the palate as an area of registration without having to remove or section provisional prostheses while also maintaining the established vertical dimension.
Asunto(s)
Registro de la Relación Maxilomandibular/métodos , Modelos Dentales , Hueso Paladar/anatomía & histología , Articuladores Dentales , Materiales de Impresión Dental/química , Técnica de Impresión Dental , Diseño de Dentadura , Dentadura Completa , Humanos , Registro de la Relación Maxilomandibular/instrumentación , Dimensión VerticalRESUMEN
O colapso oclusal posterior pode produzir marcantes mudanças no relacionamento oclusal e alterações estéticas. A determinação de uma correta dimensão vertical de oclusão e relação cêntrica são as bases para o tratamento com qualquer tipo de prótese. A prótese parcial removível pode ser uma excelente modalidade de tratamento, principalmente quando os pacientes apresentam poucos dentes-suportes e desejam uma alternativa mais simples e econômica
Asunto(s)
Humanos , Femenino , Adulto , Modelos Dentales , Dentadura Parcial Removible , Erosión de los Dientes/terapia , Pérdida de Diente/terapia , Relación Céntrica , Dimensión VerticalRESUMEN
Säo abordados os fatores de relevância na determinaçäo do registro da relaçäo cêntrica, tais como: posiçäo e relaxamento do paciente, técnica de manipulaçäo e material para registro. Seräo demonstradas as associaçöes entre técnicas e materiais que preencham os requisitos para um registro preciso da relaçäo cêntrica
Asunto(s)
Humanos , Relación Céntrica , Registro de la Relación Maxilomandibular/métodosRESUMEN
Os preparos mudaram substancialmente desde a introdução da cimentação adesiva. As mudanças surgidas nos preparos extra e intra-coronários são relatadas enfatizando o adequamento sofrido em virtude das características dos materiais restauradores utilizados na cimentação adesiva