RESUMEN

Heart failure due to Myocardial Infarction (MI) remains the leading cause of death worldwide due to the inability of myocardial tissue to regenerate following infarction. Current therapies could only retard the progression of disease, but fails to bring functional improvement and cardiac regeneration. The present study analyzes the potentials of Poly(glycerol sebacate)/Fibrinogen (PGS/Fib) core/shell fibers as a structural support and initial entrapment of cells in an in vivo porcine model using echocardiography, histology, and immunohistochemistry. The echocardiography results showed the increased ejection fraction (EF) in PGS/Fib/VEGF/Cells compared with MI controls. The percentage increase in the End Diastolic Volume (EDV) dimension from post MI period to 4 weeks follow-up was the least in PGS/Fib/VEGF/Cells groups compared with MI and cell control group proving that the PGS/Fib/VEGF/Cells group restored the left ventricle (LV) function after MI, evident from the improvement in EF and prevention of LV enlargement. Further, immunohistochemistry results demonstrated that most of the transplanted mesenchymal stem cells (MSCs) within the PGS/Fib/VEGF scaffolds expressed cardiac marker proteins troponin and actinin and endothelial cell marker protein CD31 indicating differentiation of human bone marrow MSCs into cardiac cells and endothelial cells. The developed nanofibrous cardiac patch PGS/Fib/VEGF/Cells provides both functional and structural integrity to the infarcted myocardium and also serves as a suitable matrix for the entrapment of MSCs in clinical applications for cardiac tissue engineering.

Asunto(s)

RESUMEN

Heart disease is the leading cause of mortality in many industrialized nations and is often related to irregularities in electrical function that can radically damage cardiac functioning. The aim of this study is to develop a novel therapeutic hybrid scaffold that can couple electrical, mechanical, and biological properties, desirable for cardiac tissue regeneration. BSA/PVA scaffolds are fabricated in the ratio 2:1 and gold nanoparticles (AuNPs) embedded scaffolds in the ratios BSA/PVA/Au of 2:1:0.1 (lower concentration) and BSA/PVA/Au of 2:1:0.4 (higher concentration) by electrospinning. The scaffolds are characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), contact angle, Fourier transform infrared (FTIR) spectroscopy, and tensile testing to analyze the fiber morphology, AuNP distribution, hydrophilicity, surface functional groups, and mechanical properties of the scaffolds, respectively. Results show that ex vivo pretreatment of MSCs using 5-aza and AuNPs loaded conductive nanofibrous construct could lead to enhanced cardiomyogenic differentiation and result in superior biological and functional effects on infarcted myocardium regeneration.

Asunto(s)

RESUMEN

Every year, millions of people suffer from dermal wounds caused by heat, fire, chemicals, electricity, ultraviolet radiation or disease. Tissue engineering and nanotechnology have enabled the engineering of nanostructured materials to meet the current challenges in skin treatments owing to such rising occurrences of accidental damages, skin diseases and defects. The abundance and accessibility of adipose derived stem cells (ADSCs) may prove to be novel cell therapeutics for skin regeneration. The nanofibrous PVA/gelatin/azide scaffolds were then fabricated by electrospinning using water as solvent and allowed to undergo click reaction. The scaffolds were characterized by SEM, contact angle and FTIR. The cell-scaffold interactions were analyzed by cell proliferation and the results observed that the rate of cell proliferation was significantly increased (P ≤ 0.05) on PVA/gelatin/azide scaffolds compared to PVA/gelatin nanofibers. In the present study, manipulating the biochemical cues by the addition of an induction medium, in combination with environmental and physical factors of the culture substrate by functionalizing with click moieties, we were able to drive ADSCs into epidermal lineage with the development of epidermis-like structures, was further confirmed by the expression of early and intermediate epidermal differentiation markers like keratin and filaggrin. This study not only provides an insight into the design of a site-specific niche-like microenvironment for stem cell lineage commitment, but also sheds light on the therapeutic application of an alternative cell source-ADSCs, for wound healing and skin tissue reconstitution.

Asunto(s)

RESUMEN

AIM: Myocardial infarction is caused after impairment of heart wall muscle following an immense cell loss and also when the myocardial tissue is lacking the inherent capacity to regenerate for normal functioning of myocardium. An immediate challenge in cardiac regeneration is to devise a strategy that leads to a reproducible degree of cardiac differentiation. We have speculated that ex vivo pretreatment of adipose-derived stem cells (ADSCs) using 5-azacytidine and a suitable patterned nanofibrous construct could lead to cardiomyogenic differentiation and results in superior biological and functional effects on cardiac regeneration of infarcted myocardium. MATERIALS & METHODS: Polyglycerol sebacate/gelatin fibers were fabricated by core/shell electrospinning with polyglycerol sebacate as the core material and gelatin as the shell material. Patterning of the core/shell fibers to form orthogonal and looped buckled nanostructures was achieved. RESULTS: Results demonstrated that the buckled fibers showing an orthogonal orientation and looped pattern had a Young's modulus of approximately 3.59 ± 1.58 MPa and 2.07 ± 0.44 MPa, respectively, which was comparable to that of native myocardium. The ADSCs cultured on these scaffolds demonstrated greater expression of the cardiac-specific marker proteins actinin, troponin and connexin 43, as well as characteristic multinucleation as shown by immunocytochemical and morphological analysis, indicating complete cardiogenic differentiation of ADSCs. CONCLUSION: In the natural milieu, cardiomyogenic differentiation probably involves multiple signaling pathways and we have postulated that a buckled structure combination of chemical treatment and environment-driven strategy induces cardiogenic differentiation of ADSCs. The combination of patterned buckled fibrous structures with stem cell biology may prove to be a productive device for myocardial infarction.

Asunto(s)

RESUMEN

Engineered nanofibers are generally focused on filtration, solar cells, sensors, smart textile fabrication, tissue engineering, etc. Electrospun nanofibers have potential advantages in tissue engineering and regenerative medicine, because of the ease in the incorporation of drugs, growth factors, natural materials, and inorganic nanoparticles in to these nanofiber scaffolds. Electrospun nanofiber scaffolds composed of synthetic and natural polymers are being explored as scaffolds similar to natural extracellular matrix for tissue engineering. The requirement of the inorganic composites in the nanofiber scaffolds for favouring hard and soft tissue engineering applications is dealt in detail in the present review. Regarding drug delivery applications of the composite nanofibers, the review emphasizes on wound healing with silver nanoparticles incorporated nanofibers, bone tissue engineering, and cancer chemotherapy with titanium and platinum complexes loaded nanofibers. The review also describes gold nanoparticle loaded nanofibers for cancer diagnosis and cosmetic applications.

Asunto(s)

RESUMEN

AIM: To facilitate engineering of suitable biomaterials to meet the challenges associated with myocardial infarction. METHODS: Poly (glycerol sebacate)/collagen (PGS/collagen) core/shell fibers were fabricated by core/shell electrospinning technique, with core as PGS and shell as collagen polymer; and the scaffolds were characterized by scanning electron microscope (SEM), fourier transform infrared spectroscopy (FTIR), contact angle and tensile testing for cardiac tissue engineering. Collagen nanofibers were also fabricated by electrospinning for comparison with core/shell fibers. Studies on cell-scaffold interaction were carried out using cardiac cells and mesenchymal stem cells (MSCs) co-culture system with cardiac cells and MSCs separately serving as positive and negative controls respectively. The co-culture system was characterized for cell proliferation and differentiation of MSCs into cardiomyogenic lineage in the co-culture environment using dual immunocytochemistry. The co-culture cells were stained with cardiac specific marker proteins like actinin and troponin and MSC specific marker protein CD 105 for proving the cardiogenic differentiation of MSCs. Further the morphology of cells was analyzed using SEM. RESULTS: PGS/collagen core/shell fibers, core is PGS polymer having an elastic modulus related to that of cardiac fibers and shell as collagen, providing natural environment for cellular activities like cell adhesion, proliferation and differentiation. SEM micrographs of electrospun fibrous scaffolds revealed porous, beadless, uniform fibers with a fiber diameter in the range of 380 ± 77 nm and 1192 ± 277 nm for collagen fibers and PGS/collagen core/shell fibers respectively. The obtained PGS/collagen core/shell fibrous scaffolds were hydrophilic having a water contact angle of 17.9 ± 4.6° compared to collagen nanofibers which had a contact angle value of 30 ± 3.2°. The PGS/collagen core/shell fibers had mechanical properties comparable to that of native heart muscle with a young's modulus of 4.24 ± 0.7 MPa, while that of collagen nanofibers was comparatively higher around 30.11 ± 1.68 MPa. FTIR spectrum was performed to confirm the functional groups present in the electrospun scaffolds. Amide I and amide II of collagen were detected at 1638.95 cm(-1) and 1551.64 cm(-1) in the electrospun collagen fibers and at 1646.22 cm(-1) and 1540.73 cm(-1) for PGS/collagen core/shell fibers respectively. Cell culture studies performed using MSCs and cardiac cells co-culture environment, indicated that the cell proliferation significantly increased on PGS/collagen core/shell scaffolds compared to collagen fibers and the cardiac marker proteins actinin and troponin were expressed more on PGS/collagen core/shell scaffolds compared to collagen fibers alone. Dual immunofluorescent staining was performed to further confirm the cardiogenic differentiation of MSCs by employing MSC specific marker protein, CD 105 and cardiac specific marker protein, actinin. SEM observations of cardiac cells showed normal morphology on PGS/collagen fibers and providing adequate tensile strength for the regeneration of myocardial infarction. CONCLUSION: Combination of PGS/collagen fibers and cardiac cells/MSCs co-culture system providing natural microenvironments to improve cell survival and differentiation, could bring cardiac tissue engineering to clinical application.

RESUMEN

Mimicking hybrid extracellular matrix is one of the main challenges for bone tissue engineering (BTE). Biocompatible polycaprolactone/poly(α,ß)-DL-aspartic acid/collagen nanofibrous scaffolds were fabricated by electrospinning and nanohydroxyapatite (n-HA) was deposited by calcium phosphate dipping method for BTE. Human mesenchymal stem cells (hMSCs) were cultured on these hybrid scaffolds to investigate the cell proliferation, osteogenic differentiation by alkaline phosphatase activity, mineralization, double immunofluorescent staining using CD90 and expression of osteocalcin. The present study indicated that the PCL/PAA/collagen/n-HA scaffolds promoted greater osteogenic differentiation of hMSCs, proving to be a potential hybrid scaffolds for BTE.

Asunto(s)

RESUMEN

A functional scaffold fabricated is developed from natural polymers, favoring regeneration of the ischemic myocardium. Hemoglobin/gelatin/fibrinogen (Hb/gel/fib) nanofibers are fabricated by electrospinning and are characterized for morphology, scaffold composition, functional groups and hydrophilicity. It is hypothesized that ex vivo pretreatment of mesenchymal stem cells (MSCs) using 5-azacytidine and such a functional nanofibrous construct having a high oxygen-carrying potential could lead to enhanced cardiomyogenic differentiation of MSCs and result in superior biological and functional effects. The combination of a functional nanofibrous scaffold composed of natural polymers and crosslinked with a natural crosslinking agent, phytic acid, and stem cell biology may prove to be a novel therapeutic device for treatment of myocardial infarction.

Asunto(s)

RESUMEN

Mimicking porous topography of natural extracellular matrix is advantageous for successful regeneration of damaged tissues or organs. Nanotechnology being one of the most promising and growing technology today shows an extremely huge potential in the field of tissue engineering. Nanofibrous structures that mimic the native extracellular matrix and promote the adhesion of various cells are being developed as tissue-engineered scaffolds for skin, bone, vasculature, heart, cornea, nervous system, and other tissues. A range of novel biocomposite materials has been developed to enhance the bioactive or therapeutic properties of these nanofibrous scaffolds via surface modifications, including the immobilization of functional cell-adhesive ligands and bioactive molecules such as drugs, enzymes, and cytokines. In skin tissue engineering, usage of allogeneic skin is avoided to reestablish physiological continuity and also to address the challenge of curing acute and chronic wounds, which remains as the area of exploration with various biomimetic approaches. Two-dimensional, three-dimensional scaffolds and stem cells are presently used as dermal regeneration templates for the treatment of full-thickness skin defects resulting from injuries and severe burns. The present review elaborates specifically on the fabrication of nanofibrous structured strategies for wound dressings, wound healing, and controlled release of growth factors for skin tissue regeneration.

Asunto(s)

RESUMEN

BACKGROUND: Heart failure due to myocardial infarction remains the leading cause of death worldwide owing to the inability of myocardial tissue regeneration. The aim of this study is to develop a core/shell fibrous cardiac patch having desirable mechanical properties and biocompatibility to engineer the infarcted myocardium. METHOD: We fabricated poly(glycerol sebacate)/fibrinogen (PGS/fibrinogen) core/shell fibers with core as elastomeric PGS provides suitable mechanical properties comparable to that of native tissue and shell as fibrinogen to promote cell-biomaterial interactions. The PGS/fibrinogen core/shell fibers and fibrinogen nanofibers were characterized by SEM, contact angle and tensile testing to analyze the fiber morphology, wettability, and mechanical properties of the scaffold. The cell-scaffold interactions were analyzed using isolated neonatal cardiomyocytes for cell proliferation, confocal analysis for the expression of marker proteins α-actinin, Troponin-T, ß-myosin heavy chain and connexin 43 and SEM analysis for cell morphology. RESULTS: We observed PGS/fibrinogen core/shell fibers had a Young's modulus of about 3.28 ± 1.7 MPa, which was comparable to that of native myocardium. Neonatal cardiomyocytes cultured on these scaffolds showed normal expression of cardiac specific marker proteins α-actinin, Troponin, ß-myosin heavy chain and connexin 43 to prove PGS/fibrinogen core/shell fibers have potential for cardiac tissue engineering. CONCLUSION: Results indicated that neonatal cardiomyocytes formed predominant gap junctions and expressed cardiac specific marker proteins on PGS/fibrinogen core/shell fibers compared to fibrinogen nanofibers, indicating PGS/fibrinogen core/shell fibers may serve as a suitable cardiac patch for the regeneration of infarcted myocardium.

Asunto(s)

RESUMEN

Myocardial infarction (MI) is characterized by heart-wall thinning, myocyte slippage, and ventricular dilation. The injury to the heart-wall muscle after MI is permanent, as after an abundant cell loss the myocardial tissue lacks the intrinsic capability to regenerate. New therapeutics are required for functional improvement and regeneration of the infarcted myocardium, to overcome harmful diagnosis of patients with heart failure, and to overcome the shortage of heart donors. In the past few years, myocardial tissue engineering has emerged as a new and ambitious approach for treating MI. Several left ventricular assist devices and epicardial patches have been developed for MI. These devices and acellular/cellular cardiac patches are employed surgically and sutured to the epicardial surface of the heart, limiting the region of therapeutic benefit. An injectable system offers the potential benefit of minimally invasive release into the myocardium either to restore the injured extracellular matrix or to act as a scaffold for cell delivery. Furthermore, intramyocardial injection of biomaterials and cells has opened new opportunities to explore and also to augment the potentials of this technique to ease morbidity and mortality rates owing to heart failure. This review summarizes the growing body of literature in the field of myocardial tissue engineering, where biomaterial injection, with or without simultaneous cellular delivery, has been pursued to enhance functional and structural outcomes following MI. Additionally, this review also provides a complete outlook on the tissue-engineering therapies presently being used for myocardial regeneration, as well as some perceptivity into the possible issues that may hinder its progress in the future.

Asunto(s)

RESUMEN

Myocardial tissue lacks the ability to appreciably regenerate itself following myocardial infarction (MI) which ultimately results in heart failure. Current therapies can only retard the progression of disease and hence tissue engineering strategies are required to facilitate the engineering of a suitable biomaterial to repair MI. The aim of this study was to investigate the in vitro properties of an injectable biomaterial for the regeneration of infarcted myocardium. Fabrication of core/shell fibers was by co-axial electrospinning, with poly(glycerol sebacate) (PGS) as core material and poly-L-lactic acid (PLLA) as shell material. The PLLA was removed by treatment of the PGS/PLLA core/shell fibers with DCM:hexane (2:1) to obtain PGS short fibers. These PGS short fibers offer the advantage of providing a minimally invasive injectable technique for the regeneration of infarcted myocardium. The scaffolds were characterized by SEM, FTIR and contact angle and cell-scaffold interactions using cardiomyocytes. The results showed that the cardiac marker proteins actinin, troponin, myosin heavy chain and connexin 43 were expressed more on short PGS fibers compared to PLLA nanofibers. We hypothesized that the injection of cells along with short PGS fibers would increase cell transplant retention and survival within the infarct, compared to the standard cell injection system.

Asunto(s)

RESUMEN

The characteristics of tissue engineered scaffolds are major concerns in the quest to fabricate ideal scaffolds for tissue engineering applications. The polymer scaffolds employed for tissue engineering applications should possess multifunctional properties such as biocompatibility, biodegradability and favorable mechanical properties as it comes in direct contact with the body fluids in vivo. Additionally, the polymer system should also possess biomimetic architecture and should support stem cell adhesion, proliferation and differentiation. As the progress in polymer technology continues, polymeric biomaterials have taken characteristics more closely related to that desired for tissue engineering and clinical needs. Stimuli responsive polymers also termed as smart biomaterials respond to stimuli such as pH, temperature, enzyme, antigen, glucose and electrical stimuli that are inherently present in living systems. This review highlights the exciting advancements in these polymeric systems that relate to biological and tissue engineering applications. Additionally, several aspects of technology namely scaffold fabrication methods and surface modifications to confer biological functionality to the polymers have also been discussed. The ultimate objective is to emphasize on these underutilized adaptive behaviors of the polymers so that novel applications and new generations of smart polymeric materials can be realized for biomedical and tissue engineering applications.

Asunto(s)

RESUMEN

Tissue engineering scaffolds for skin tissue regeneration is an ever expounding area of research, as the products that meet the necessary requirements are far and elite. The nanofibrous poly-L-lactic acid/poly-(α,ß)-DL-aspartic acid/Collagen (PLLA/PAA/Col I&III) scaffolds were fabricated by electrospinning and characterized by SEM, contact angle and FTIR analysis for skin tissue regeneration. The cell-scaffold interactions were analyzed by cell proliferation and their morphology observed in SEM. The results showed that the cell proliferation was significantly increased (p≤0.05) in PLLA/PAA/Col I&III scaffolds compared to PLLA and PLLA/PAA nanofibrous scaffolds. The abundance and accessibility of adipose derived stem cells (ADSCs) may prove to be novel cell therapeutics for dermal tissue regeneration. The differentiation of ADSCs was confirmed using collagen expression and their morphology by CMFDA dye extrusion technique. The current study focuses on the application of PLLA/PAA/Col I&III nanofibrous scaffolds for skin tissue engineering and their potential use as substrate for the culture and differentiation of ADSCs. The objective for inclusion of a novel cell binding moiety like PAA was to replace damaged extracellular matrix and to guide new cells directly into the wound bed with enhanced proliferation and overall organization. This combinatorial epitome of PLLA/PAA/Col I&III nanofibrous scaffold with stem cell therapy to induce the necessary paracrine signalling effect would favour faster regeneration of the damaged skin tissues.

Asunto(s)

RESUMEN

The time required for osseointegration with a metal implant having a smooth surface ranges from three to six months. We hypothesized that biomimetic coating surfaces with poly(lactic-co-glycolic acid) (PLGA)/collagen fibers and nano-hydroxyapatite (n-HA) on the implant would enhance the adhesion of mesenchymal stem cells. Therefore, this surface modification of dental and bone implants might enhance the process of osseointegration. In this study, we coated PLGA or PLGA/collagen (50:50 w/w ratio) fiber on Ti disks by modified electrospinning for 5 s to 2 min; after that, we further deposited n-HA on the fibers. PLGA fibers of fiber diameter 0.957 ± 0.357 µm had a contact angle of 9.9 ± 0.3° and PLGA/collagen fibers of fiber diameter 0.378 ± 0.068 µm had a contact angle of 0°. Upon n-HA incorporation, all the fibers had a contact angle of 0° owing to the hydrophilic nature of n-HA biomolecule. The cell attachment efficiency was tested on all the scaffolds for different intervals of time (10, 20, 30 and 60 min). The alkaline phosphatase activity, cell proliferation and mineralization were analyzed on all the implant surfaces on days 7, 14 and 21. Results of the cell adhesion study indicated that the cell adhesion was maximum on the implant surface coated with PLGA/collagen fibers deposited with n-HA compared to the other scaffolds. Within a short span of 60 min, 75% of the cells adhered onto the mineralized PLGA/collagen fibers. Similarly by day 21, the rate of cell proliferation was significantly higher (p ⩽ 0.05) on the mineralized PLGA/collagen fibers owing to enhanced cell adhesion on these fibers. This enhanced initial cell adhesion favored higher cell proliferation, differentiation and mineralization on the implant surface coated with mineralized PLGA/collagen fibers.

Asunto(s)

RESUMEN

Tissue engineering and nanotechnology have enabled engineering of nanostructured materials to meet the current challenges in bone treatment owing to rising occurrence of bone diseases, accidental damages and defects. Poly(L-lactic acid)/Poly-benzyl-L-glutamate/Collagen (PLLA/PBLG/Col) scaffolds were fabricated by electrospinning and nanohydroxyapatite (n-HA) was deposited by calcium-phosphate dipping method for bone tissue engineering (BTE). The abundance and accessibility of adipose derived stem cells (ADSC) may prove to be novel cell therapeutics for bone repair and regeneration. ADSCs were cultured on these scaffolds and were induced to undergo osteogenic differentiation in the presence of PBLG/n-HA for BTE. The cell-biomaterial interactions were analyzed using cell proliferation, SEM and CMFDA dye extraction techniques. Osteogenic differentiation of ADSC was confirmed using alkaline phosphatase activity (ALP), mineralization (ARS) and dual immunofluorescent staining using both ADSC marker protein and Osteocalcin, which is a bone specific protein. The utmost significance of this study is the bioactive PBLG/n-HA biomolecule introduced on the polymeric nanofibers to regulate and improve specific biological functions like adhesion, proliferation and differentiation of ADSC into osteogenic lineage. This was evident from the immunostaining and CMFDA images of ADSCs showing cuboidal morphology, characteristic of osteogenic lineage. The observed results proved that the PLLA/PBLG/Col/n-HA scaffolds promoted greater osteogenic differentiation of ADSC as evident from the enzyme activity and mineralization profiles for bone tissue engineering.

Asunto(s)

RESUMEN

World Health Organization estimated that heart failure initiated by coronary artery disease and myocardial infarction (MI) leads to 29 per cent of deaths worldwide. Heart failure is one of the leading causes of death in industrialized countries and is expected to become a global epidemic within the twenty-first century. MI, the main cause of heart failure, leads to a loss of cardiac tissue impairment of left ventricular function. The damaged left ventricle undergoes progressive 'remodelling' and chamber dilation, with myocyte slippage and fibroblast proliferation. Repair of diseased myocardium with in vitro-engineered cardiac muscle patch/injectable biopolymers with cells may become a viable option for heart failure patients. These events reflect an apparent lack of effective intrinsic mechanism for myocardial repair and regeneration. Motivated by the desire to develop minimally invasive procedures, the last 10 years observed growing efforts to develop injectable biomaterials with and without cells to treat cardiac failure. Biomaterials evaluated include alginate, fibrin, collagen, chitosan, self-assembling peptides, biopolymers and a range of synthetic hydrogels. The ultimate goal in therapeutic cardiac tissue engineering is to generate biocompatible, non-immunogenic heart muscle with morphological and functional properties similar to natural myocardium to repair MI. This review summarizes the properties of biomaterial substrates having sufficient mechanical stability, which stimulates the native collagen fibril structure for differentiating pluripotent stem cells and mesenchymal stem cells into cardiomyocytes for cardiac tissue engineering.

Asunto(s)

RESUMEN

In myocardial tissue engineering the use of synthetically bioengineered flexible patches implanted in the infarcted area is considered one of the promising strategy for cardiac repair. In this work the potentialities of a biomimetic electrospun scaffold made of a commercial copolymer of (L)-lactic acid with trimethylene carbonate (P(L)LA-co-TMC) are investigated in comparison to electrospun poly(L)lactic acid. The P(L)LA-co-TMC scaffold used in this work is a glassy rigid material at room temperature while it is a rubbery soft material at 37 °C. Mechanical characterization results (tensile stress-strain and creep-recovery measurements) show that at 37 °C electrospun P(L)LA-co-TMC displays an elastic modulus of around 20 MPa and the ability to completely recover up to 10% of deformation. Cell culture experiments show that P(L)LA-co-TMC scaffold promotes cardiomyocyte proliferation and efficiently preserve cell morphology, without hampering expression of sarcomeric alpha actinin marker, thus demonstrating its potentialities as synthetic biomaterial for myocardial tissue engineering.

Asunto(s)

RESUMEN

Heart failure remains the leading cause of death in many industrialized nations owing to the inability of the myocardial tissue to regenerate. The main objective of this work was to develop a cardiac patch that is biocompatible and matches the mechanical properties of the heart muscle for myocardial infarction. The present study was to fabricate poly (glycerol sebacate)/gelatin (PGS/gelatin) core/shell fibers and gelatin fibers alone by electrospinning for cardiac tissue engineering. PGS/gelatin core/shell fibers, PGS used as a core polymer to impart the mechanical properties and gelatin as a shell material to achieve favorable cell adhesion and proliferation. These core/shell fibers were characterized by scanning electron microscopy, contact angle, Fourier transform infrared spectroscopy, and tensile testing. The cell-scaffold interactions were analyzed by cell proliferation, confocal analysis for the expression of marker proteins like actinin, troponin-T, and platelet endothelial cell adhesion molecule, and scanning electron microscopy to analyze cell morphology. Dual immunofluorescent staining was performed to further confirm the cardiogenic differentiation of mesenchymal stem cells by employing mesenchymal stem cell-specific marker protein CD 105 and cardiac-specific marker protein actinin. The results observed that PGS/gelatin core/shell fibers have good potential biocompatibility and mechanical properties for fabricating nanofibrous cardiac patch and would be a prognosticating device for the restoration of myocardium.

Asunto(s)

RESUMEN

Conducting polymers (CPs) have attracted much interest as suitable matrices of biomolecules and have been used to enhance the stability, speed and sensitivity of various biomedical devices. Moreover, CPs are inexpensive, easy to synthesize and versatile because their properties can be readily modulated by (i) surface functionalization techniques and (ii) the use of a wide range of molecules that can be entrapped or used as dopants. This paper discusses the various surface modifications of the CP that can be employed in order to impart physico-chemical and biological guidance cues that promote cell adhesion/proliferation at the polymer-tissue interface. This ability of the CP to induce various cellular mechanisms widens its applications in medical fields and bioengineering.

Asunto(s)