RESUMEN
A method for the fabrication of high diffraction efficiency optical transmission gratings with quasi-sinusoidal profile in glasses by microbeams of medium-mass ions of 5-6 MeV energy was devised and demonstrated. Gratings with a 30 µm grating constant have been manufactured and characterized by interference microscopy and microprofilometry. The obtained surface profiles of the gratings were found to be quasi-sinusoidal with up to 265 nm amplitude. Measured highest first-order diffraction efficiencies were around 26% in both Pyrex and IOG glasses. Such gratings could serve as coupling elements in integrated optics and photonic integrated circuits.
RESUMEN
The Ice Chamber for Astrophysics-Astrochemistry (ICA) is a new laboratory end station located at the Institute for Nuclear Research (Atomki) in Debrecen, Hungary. The ICA has been specifically designed for the study of the physico-chemical properties of astrophysical ice analogs and their chemical evolution when subjected to ionizing radiation and thermal processing. The ICA is an ultra-high-vacuum compatible chamber containing a series of IR-transparent substrates mounted on a copper holder connected to a closed-cycle cryostat capable of being cooled down to 20 K, itself mounted on a 360° rotation stage and a z-linear manipulator. Ices are deposited onto the substrates via background deposition of dosed gases. The ice structure and chemical composition are monitored by means of FTIR absorbance spectroscopy in transmission mode, although the use of reflectance mode is possible by using metallic substrates. Pre-prepared ices may be processed in a variety of ways. A 2 MV Tandetron accelerator is capable of delivering a wide variety of high-energy ions into the ICA, which simulates ice processing by cosmic rays, solar wind, or magnetospheric ions. The ICA is also equipped with an electron gun that may be used for electron impact radiolysis of ices. Thermal processing of both deposited and processed ices may be monitored by means of both FTIR spectroscopy and quadrupole mass spectrometry. In this paper, we provide a detailed description of the ICA setup as well as an overview of the preliminary results obtained and future plans.
RESUMEN
On a roundtrip to Mars, astronauts are expectedly exposed to an approximate amount of radiation that exceeds the lifetime limits on Earth. This elevated radiation dose is mainly due to Galactic Cosmic Rays and Solar Particle Events. Specific patterns of the N-glycosylation of human Igs have already been associated with various ailments such as autoimmune diseases, malignant transformation, chronic inflammation, and ageing. The focus of our work was to investigate the effect of low-energy proton irradiation on the IgG N-glycosylation profile with the goal if disease associated changes could be detected during space travel and not altered by space radiation. Two ionization sources were used during the experiments, a Van de Graaff generator for the irradiation of solidified hIgG samples in vacuum, and a Tandetron accelerator to irradiate hIgG samples in aqueous solution form. Structural carbohydrate analysis was accomplished by CE with laser induced fluorescent detection to determine the effects of simulated space radiation on N-glycosylation of hIgG1 samples. Our results revealed that even several thousand times higher radiation doses that of astronauts can suffer during long duration missions beyond the shielding environment of Low Earth Orbit, no changes were observed in hIgG1 N-glycosylation. Consequently, changes in N-linked carbohydrate profile of IgG1 can be used as molecular diagnostic tools in space.
Asunto(s)
Radiación Cósmica/efectos adversos , Glicosilación/efectos de la radiación , Inmunoglobulina G , Vuelo Espacial , Astronautas , Electroforesis Capilar , Humanos , Inmunoglobulina G/análisis , Inmunoglobulina G/química , Inmunoglobulina G/efectos de la radiación , Modelos TeóricosRESUMEN
As a continuation of our previously published work, this paper presents a detailed evaluation of a microfabricated cell capture device utilizing a doubly tilted micropillar array. The device was fabricated using a novel hybrid technology based on the combination of proton beam writing and conventional lithography techniques. Tilted pillars offer unique flow characteristics and support enhanced fluidic interaction for improved immunoaffinity based cell capture. The performance of the microdevice was evaluated by an image sequence analysis based in-house developed single-cell tracking system. Individual cell tracking allowed in-depth analysis of the cell-chip surface interaction mechanism from hydrodynamic point of view. Simulation results were validated by using the hybrid device and the optimized surface functionalization procedure. Finally, the cell capture capability of this new generation microdevice was demonstrated by efficiently arresting cells from a HT29 cell-line suspension.
Asunto(s)
Bioensayo/instrumentación , Rastreo Celular/métodos , Impresión/métodos , Rastreo Celular/instrumentación , Células HT29 , Humanos , Hidrodinámica , Dispositivos Laboratorio en un Chip , Técnicas Analíticas Microfluídicas/instrumentación , Técnicas Analíticas Microfluídicas/métodos , ProtonesRESUMEN
Purpose: Rare interchange haplotypes in exon 3 of the OPN1LW and OPN1MW opsin genes cause X-linked myopia, color vision defect, and cone dysfunction. The severity of the disease varies on a broad scale from nonsyndromic high myopia to blue cone monochromatism. Here, we describe a new genotype-phenotype correlation attributed to rare exon 3 interchange haplotypes simultaneously present in the long- and middle-wavelength sensitive opsin genes (L- and M-opsin genes). Methods: A multigenerational family with X-linked high myopia and cone dystrophy was investigated. Results: Affected male patients had infantile onset myopia with normal visual acuity and color vision until their forties. Visual acuity decreased thereafter, along with the development of severe protan and deutan color vision defects. A mild decrease in electroretinography response of cone photoreceptors was detected in childhood, which further deteriorated in middle-aged patients. Rods were also affected, however, to a lesser extent than cones. Clinical exome sequencing identified the LVAVA and MVAVA toxic haplotypes in the OPN1LW and OPN1MW opsin genes, respectively. Conclusion: Here, we show that LVAVA haplotype of the OPN1LW gene and MVAVA haplotype of the OPN1MW gene cause apparently nonsyndromic high myopia in young patients but lead to progressive cone-rod dystrophy with deuteranopia and protanopia in middle-aged patients corresponding to a previously unknown disease course. To the best of our knowledge, this is the first report on the joint effect of these toxic haplotypes in the two opsin genes on chromosome X.
Asunto(s)
Cromosomas Humanos X/genética , Defectos de la Visión Cromática/genética , ADN/genética , Enfermedades Genéticas Ligadas al Cromosoma X/genética , Miopía/genética , Células Fotorreceptoras Retinianas Bastones/patología , Opsinas de Bastones/genética , Adolescente , Adulto , Niño , Defectos de la Visión Cromática/diagnóstico , Defectos de la Visión Cromática/metabolismo , Progresión de la Enfermedad , Electrorretinografía , Femenino , Estudios de Asociación Genética , Enfermedades Genéticas Ligadas al Cromosoma X/diagnóstico , Enfermedades Genéticas Ligadas al Cromosoma X/metabolismo , Genotipo , Haplotipos , Humanos , Masculino , Persona de Mediana Edad , Miopía/diagnóstico , Miopía/metabolismo , Linaje , Fenotipo , Reacción en Cadena de la Polimerasa , Células Fotorreceptoras Retinianas Bastones/metabolismo , Opsinas de Bastones/metabolismo , Adulto JovenRESUMEN
Design, fabrication, integration, and feasibility test results of a novel microfluidic cell capture device is presented, exploiting the advantages of proton beam writing to make lithographic irradiations under multiple target tilting angles and UV lithography to easily reproduce large area structures. A cell capture device is demonstrated with a unique doubly tilted micropillar array design for cell manipulation in microfluidic applications. Tilting the pillars increased their functional surface, therefore, enhanced fluidic interaction when special bioaffinity coating was used, and improved fluid dynamic behavior regarding cell culture injection. The proposed microstructures were capable to support adequate distribution of body fluids, such as blood, spinal fluid, etc., between the inlet and outlet of the microfluidic sample reservoirs, offering advanced cell capture capability on the functionalized surfaces. The hydrodynamic characteristics of the microfluidic systems were tested with yeast cells (similar size as red blood cells) for efficient capture.