RESUMEN
Two ways of controlling the acoustic waves propagation by external inductance or capacitance in a one-dimensional (1-D) piezomagnetic phononic crystal are investigated. The structure is made of identical bars, constituted of a piezomagnetic material, surrounded by a coil and connected to an external impedance. A model of propagation of longitudinal elastic waves through the periodic structure is developed and the dispersion equation is obtained. Reflection and transmission coefficients are derived from a 2 × 2 transfer matrix formalism that also allows for the calculation of elastic effective parameters (density, Young modulus, speed of sound, impedance). The effect of shunting impedances is numerically investigated. The results reveal that a connected external inductance tunes the Bragg band gaps of the 1-D phononic crystal. When the elements are connected via a capacitance, a hybridization gap, due to the resonance of the LC circuit made of the piezomagnetic element and the capacitance, coexists with the Bragg band gap. The value of the external capacitance modifies the boundaries of both gaps. Calculation of the effective characteristics of the phononic crystal leads to an analysis of the physical mechanisms involved in the wave propagation. When periodically connected to external capacitances, a homogeneous piezomagnetic stack behaves as a dispersive tunable metamaterial.
RESUMEN
Phononic crystals made of piezoelectric composites with 1-3 connectivity are studied theoretically and experimentally. It is shown that they present Bragg band gaps that depend on the periodic electrical boundary conditions. These structures have improved properties compared to phononic crystals composed of bulk piezoelectric elements, especially the existence of larger band gaps and the fact that they do not require severe constraints on their aspect ratios. Experimental results present an overall agreement with the theoretical predictions and clearly show that the pass bands and stop bands of the device under study are easily tunable by only changing the electrical boundary conditions applied on each piezocomposite layer.
RESUMEN
Theoretical and experimental analyses of piezoelectric stacks submitted to periodical electrical boundary conditions via electrodes are conducted. The presented structures exhibit Bragg band gaps that can be switched on or off by setting electrodes in short or open circuit. The band gap frequency width is determined by the electromechanical coupling coefficient. This property is used to design a Fabry-Perot cavity delimited by a periodic piezoelectric stack. An analytical model based on a transfer matrix formalism is used to model the wave propagation inside the structure. The cavity resonance tunability is obtained by varying the cavity length (i.e., by spatially shifting boundary conditions in the stack). 26% tuning of resonance and antiresonance frequencies with almost constant electromechanical coupling coefficient of 5% are theoretically predicted for an NCE41 resonator. To optimize the device, the influence of various parameters is theoretically investigated. The cavity length, phononic crystal (number and length of unit cells), and transducer position can be adapted to tune the frequency shift and the coupling coefficient. When the transducer is located at a nodal plane of the cavity, the value of the coupling coefficient is 30%. Experimental results are presented and discussed analyzing the effects of damping.
RESUMEN
The effect of self-similarity on acoustic and elastic wave propagation at normal incidence is investigated using Classical Cantor and Fibonacci multilayered structures. They are made of two sorts of orthotropic plies having differently oriented orthotropic axes with respect to the propagation direction. The properties of their transmission coefficient are presented using a unidirectional numerical model based on a transfer matrix formalism. It was found that stack self-similarity influences the acoustic transmission properties. Transmission coefficients of self-similar stacks present a self-similar shape and behavior. A self-similar process, applied to layer orientation allows multilayered stacks to be created. A thickness-equivalent model was developed to compare these structures with standard self-similar multilayers which are finally compared to periodic and random stacks. The transmission coefficient of a deterministic self-similar Fibonacci structure is similar to that of an averaged transmission coefficient of random stacks.