RESUMEN
Photonic crystals (PCs) are nanomaterials with photonic properties made up of periodically modulated dielectric materials that reflect light between a wavelength range located in the photonic band gap. Colloidal PCs (C-PC) have been proposed for several applications such as optical platforms for the formation of physical, chemical, and biological sensors based on a chromatic response to an external stimulus. In this work, a robust protocol for the elaboration of photonic crystals based on SiO2 particle (SP) deposition using the vertical lifting method was studied. A wide range of lifting speeds and particle suspension concentrations were investigated by evaluating the C-PC reflectance spectrum. Thinner and higher reflectance peaks were obtained with a decrease in the lifting speed and an increase in the SP concentrations up to certain values. Seven batches of twelve C-PCs employing a SP 3% suspension and a lifting speed of 0.28 µm/s were prepared to test the reproducibility of this method. Every C-PC fabricated in this assay has a wavelength peak in a range of 10 nm and a peak width lower than 90 nm. Inverse-opal polymeric films with a highly porous and interconnected morphology were obtained using the developed C-PC as a template. Overall, these results showed that reproducible colloidal crystals could be elaborated on a large scale with a simple apparatus in a short period, providing a step forward in the scale-up of the fabrication of photonic colloidal crystal and IO structures as those employed for the elaboration of photonic polymeric sensors.
RESUMEN
This paper aims to implement a laser-induced ultrasound imaging reconstruction method based on the delay-and-sum beamforming through the synthetic aperture focusing technique (SAFT) for a circular scanning, performed with a tomograph that had one acoustic sensor and a system that rotates the sample around a fixed axis. The proposed method, called the Single-sensor Scanning Synthetic Aperture Focusing Technique, considers the size of the sensor and the detection procedure inside the SAFT's algebra. This image reconstruction method was evaluated numerically, using the Green function for the laser-induced ultrasound wave equation to generate a forward problem, and experimentally, using a solid object of polylactic acid, and a Sprague-Dawley rat heart located in a tissue-mimicking phantom. The resulting images were compared to those obtained from the time reversal and the conventional delay-and-sum reconstruction algorithms. The presented method removes the sidelobe artifacts and the comet tail sign, which produces a more distinguishable target on the image. In addition, the proposed method has a faster performance and lower computational load. The implementation of this method in photoacoustic microscopy techniques for image reconstruction is discussed.
RESUMEN
BACKGROUND AND OBJECTIVE: Circulating tumor cells have been shown to correlate positively with metastatic disease state in patients with advanced cancer. We have demonstrated the ability to detect melanoma cells in a flow system by generating and detecting photoacoustic waves in melanoma cells. This method is similar to flow cytometry, although using photoacoustics rather than fluorescence. Previously, we used piezoelectric films as our acoustic sensors. However, such films have indicated false-positive signals due to unwanted direct interactions between photons from the high laser fluence in the flow system and the film itself. We have adapted an optical detection scheme that obviates the need for piezoelectric films. STUDY DESIGN/MATERIALS AND METHODS: Our photoacoustic system comprised a tunable laser system with an output of 410-710 nm with a pulse duration of 5 nanoseconds. The light was delivered by optical fiber to a glass microcuvette that contained saline buffer suspensions of melanoma and white blood cells. We used a continuous HeNe laser to provide a probe beam that reflected off of a glass and water interface in close proximity to the microcuvette. The beam was detected by a high-speed photodiode. When a photoacoustic wave was generated in the microcuvette, the wave propagated and changed the reflectance of the beam due to index of refraction change in the water. This perturbation was used to detect the presence of melanoma cells. RESULTS: We determined a detection threshold of about one individual melanoma cell with no pyroelectric noise indicated in the signals. CONCLUSIONS: The optical reflectance method provides sensitivity to detect small numbers of melanoma cells without created false-positive signals from pyroelectric interference, showing promise as a means to perform tests for circulating melanoma cells in blood samples.