RESUMEN
We present a new measurement principle to determine the absolute time delay of a waveform from an optical reference plane to an electrical reference plane and vice versa. We demonstrate a method based on this principle with 2 ps uncertainty. This method can be used to perform accurate time delay determinations of optical transceivers used in fiber-optic time-dissemination equipment. As a result the time scales in optical and electrical domain can be related to each other with the same uncertainty. We expect this method will be a new breakthrough in high-accuracy time transfer and absolute calibration of time-transfer equipment.
RESUMEN
Results of optical frequency transfer over a carrier-grade dense-wavelength-division-multiplexing (DWDM) optical fiber network are presented. The relation between soil temperature changes on a buried optical fiber and frequency changes of an optical carrier through the fiber is modeled. Soil temperatures, measured at various depths by the Royal Netherlands Meteorology Institute (KNMI) are compared with observed frequency variations through this model. A comparison of a nine-day record of optical frequency measurements through the 2×298 km fiber link with soil temperature data shows qualitative agreement. A soil temperature model is used to predict the link stability over longer periods (days-months-years). We show that optical frequency dissemination is sufficiently stable to distribute and compare, e.g., rubidium frequency standards over standard DWDM optical fiber networks using unidirectional fibers.
RESUMEN
We report on frequency comb generation at 1.5 µm by injection of a CW laser in a hybridly mode-locked InAs/InP two-section quantum-dot laser (HMLQDL). The generated comb has > 60 modes spaced by â¼ 4.5 GHz and a -20 dBc width of > 100 GHz (23 modes) at > 30 dB signal to background ratio. Comb generation was observed with the CW laser (red) detuned more than 20 nm outside the HMLQDL spectrum, spanning a large part of the gain spectrum of the quantum dot material. It is shown that the generated comb is fully coherent with the injected CW laser and RF frequency used to drive the hybrid mode-locking. This method of comb generation is of interest for the creation of small and robust frequency combs for use in optical frequency metrology, high-frequency (> 100 GHz) RF generation and telecommunication applications.
RESUMEN
Extreme UV (XUV) frequency comb generation in the wavelength range of 51 to 85 nm is reported based on high-order harmonic generation of two consecutive IR frequency comb pulses that were amplified in an optical parametric chirped pulse amplifier. The versatility of the system is demonstrated by recording direct XUV frequency comb excitation signals in He, Ne, and Ar with visibilities of up to 61%.