RESUMEN
OBJECTIVE: To evaluate the occurrence of cervical vertebrae anomalies (CVA) in patients with unilateral (UCLP) and bilateral cleft lip and palate (BCLP) using cone beam computed tomography (CBCT) examinations. DESIGN: Retrospective assessment of CBCT images. Descriptive statistics were calculated. Fisher exact test or χ2 test was performed to evaluate the differences among each CVA between sex and type of cleft. SETTING: School of Dentistry. PARTICIPANTS: One hundred fifty-one patients with cleft lip and palate (103 UCLP/48 BCLP). INTERVENTIONS: No relevant intervention. MAIN OUTCOME MEASURES: Cone beam computed tomography images were assessed for the presence or absence of 12 most commonly observed CVA: spina bifida, dehiscence, cleft of the posterior arch, cleft of the anterior arch, fusion between cervical vertebrae, block fusion, occipitalization, narrowing of the intervertebral space, posterior ponticle, os odontoideum, ossiculum terminale, and subdental cartilaginous remnants. RESULTS: The presence of subdental cartilaginous remnants was the most frequently observed alteration-found in 81.45% of the sample-and it was the only CVA with statistically significant frequencies in the individuals with BCLP. Considering only the other CVA, 22.51% presented 1 and 5.29% presented 2 or more CVA. CONCLUSIONS: Patients with cleft lip and palate may present an overall high incidence of CVAs. However, when comparing the distribution of the CVAs among sex and types of cleft, the only significant difference noted was a higher incidence of subdental cartilaginous remnants among patients with BCLP.
Asunto(s)
Labio Leporino , Fisura del Paladar , Vértebras Cervicales/diagnóstico por imagen , Labio Leporino/diagnóstico por imagen , Fisura del Paladar/diagnóstico por imagen , Tomografía Computarizada de Haz Cónico , Humanos , Estudios RetrospectivosRESUMEN
OBJECTIVES: This study aimed to evaluate the accuracy of three different methods for assessing the volume of cleft defects in CBCT images. The influence of field of view (FOV) and voxel sizes was also assessed. METHODS: Using three radio-opaque plastic skulls, unilateral defects were created to mimic alveolar clefts and were filled with wax following the contralateral side contours. They were scanned in a CBCT unit using four different acquisition protocols, varying FOV and voxel sizes. Using three different methods, the defect/wax volume was evaluated on the images by defining: (1) the width, height and facial-palatal length of the defect in maximum intensity projection; (2) the areas of the defect on axial slices; and (3) the threshold and segmentation of the region of interest. The values obtained from each method using different acquisition protocols were compared with the real volume of the wax (gold standard) using ANOVA and Tukey's test. RESULTS: Methods 2 and 3 did not differ from the gold standard (p > 0.05). Conversely, Method 1 presented statistically significant overestimated values (p < 0.01). No differences were found among the different FOV and voxel sizes (p > 0.05). CONCLUSIONS: CBCT volumes proved reliable for the volumetric assessment of alveolar cleft defects, when using Methods 2 and 3 regardless of FOV and voxel sizes. It may be possible to improve surgical planning and outcomes by knowing the exact volume of grafting material needed prior to the surgical intervention.
Asunto(s)
Proceso Alveolar/anomalías , Fisura del Paladar/diagnóstico por imagen , Tomografía Computarizada de Haz Cónico/estadística & datos numéricos , Proceso Alveolar/diagnóstico por imagen , Puntos Anatómicos de Referencia/diagnóstico por imagen , Cefalometría/estadística & datos numéricos , Humanos , Procesamiento de Imagen Asistido por Computador/estadística & datos numéricos , Imagenología Tridimensional/estadística & datos numéricos , Modelos Anatómicos , Hueso Paladar/diagnóstico por imagen , Reproducibilidad de los Resultados , Programas InformáticosRESUMEN
PURPOSE: To investigate the effect of filler-particle size of experimental and commercial resin composites, undergoing toothbrush abrasion, on three surface properties: surface roughness (SR), surface gloss (G) and color stability (CS). METHODS: Four model (Ivoclar/Vivadent) and one commercial resin composite (Tokuyama) with varying filler-size from 100-1000 nm were examined. Six discs (10 mm x 2 mm) from each product were prepared and mechanically polished. The samples were then submitted to 20,000 brushing strokes in a toothbrush abrasion machine. SR parameters (Ra, Rt and RSm), G, and CS were measured before and after toothbrush abrasion. Changes in SR and G were analyzed by 2-way ANOVA, with Bonferroni post hoc test. CS values were submitted to one-way ANOVA and Bonferroni post hoc test (alpha=0.05). RESULTS: Initial G values ranged between 73-87 gloss units (GU) and were reduced after toothbrush abrasion to a range of 8-64 GU. Toothbrush abrasion resulted in significant modifications in SR and G amongst the materials tested, attributed to filler sizes. There was statistically significant difference in color (delta E* ranged from 0.38-0.88). Filler size did not affect color stability. Toothbrush abrasion resulted in rougher and matte surfaces for all materials tested. Although the individual differences in surface roughness among filler sizes were not always significant, the correlation showed a trend that larger filler sizes resulted in higher surface roughness after abrasion for the SR parameters Ra and Rt (r = 0.95; r = 0.93, respectively). RSm showed an increase after toothbrush abrasion for all resin composites, however no significant correlation was detected (r = 0.21).There was a significant correlation between G and Ra ratios (r = - 0.95).
Asunto(s)
Resinas Compuestas , Cepillado Dental/instrumentación , Análisis de Varianza , Color , Colorimetría , Alisadura de la Restauración Dental , Análisis del Estrés Dental , Nanocompuestos , Tamaño de la Partícula , Propiedades de SuperficieRESUMEN
This study aimed to develop a low cost in vitro viable microbiological model to produce biofilms to be used in dental researches. Single and multi-species biofilms of S. mutans, S. sobrinus, S. mitis, S. salivarius, S. cricetus and S. sanguinis were grown on bovine enamel slabs during 10 days, in a sterile brain-heart infusion broth, containing 5% sucrose and incubated at 37ºC in an atmosphere of 10% CO2. The slabs were transferred to a fresh medium at every 6, 12 or 24 hours. After the experimental period, enamel volume percent mineral was determined by cross-sectional microhardness. Caries-like lesions were found in all bacterial groups when compared with the control group. No statistical significant differences were found between S. mutans and S. sobrinus with respect of their cariogenicity or among the periods of medium change. However, it was found a statistical significant difference among the cariogenicity of S. salivarius and S. sanguinis (ANOVA followed by Tukey test). This model has successfully developed caries-like lesion on enamel and the medium can be changed at every 24 hours utilizing either S. mutans or S. sobrinus.
Asunto(s)
Animales , Bovinos , Biopelículas , Caries Dental , Esmalte Dental , Streptococcus mitis , Streptococcus mutans , Streptococcus sobrinusRESUMEN
OBJECTIVES: The aim of this 'in situ' study was to evaluate the microhardness of dental enamel following treatment with an in-office and an at-home vital bleaching agent through a novel approach using samples temporarily bonded 'in vivo'. METHODS: Human dental enamel slabs (n=88) were subjected to sequential polishing and initial Knoop microhardness tests were performed. The slabs were fixed to the facial surfaces of the maxillary first molars of 44 human volunteers. They were divided into four groups (n=11) according to the treatment group: G1- in-office-CP37+ at-home-CP10; G2- in-office-CP37+ at-home-PLA; G3- in-office-PLA and at-home-CP10; G4- in-office and at-home-PLA. After 3 weeks of treatment, final microhardness measurements were performed. RESULTS AND SIGNIFICANCE: ANOVA and Tukey's HSD hoc analysis (alpha=0.05) revealed no differences among initial or final microhardness values (p>0.05); however, significant differences occurred between initial and final values for each group (p<0.01), The evaluation of microhardness revealed a reduction of 6.8% for G1, 4.1% for G2, 3.4% for G3 and 3.5% for G4. In-office bleaching with 37% carbamide peroxide, an at-home bleaching with 10% carbamide peroxide, and a combination of both resulted in lower enamel microhardness when measured immediately post-treatment. However, long-term effects of these treatments are not known, and are believed to be clinically insignificant due to the relatively small reductions observed in enamel microhardness. Interestingly, the carrier, Cabopol 934P, also resulted in similar reduction in enamel microhardness even when administrated alone as a placebo.