RESUMEN

Aqueous dispersions of charged-neutral block copolymers (poly(acrylamide)-b-poly(acrylate)) complexed with an oppositely charged surfactant (dodecyltrimethylammonium) have been prepared by different approaches: the simple mixing of two solutions (MS approach) containing the block copolymer and surfactant, with their respective simple counterions, and dispersion of a freeze-dried complex salt prepared in the absence of simple counterions (CS approach). The CS particles were investigated under different conditions: dispersion of a CS in salt-free water and dispersion of a CS in a dilute salt solution, the latter condition yielding dispersions with the same composition as the MS process. Additionally, aged dispersions (up to 6 months) and dispersed complexes of the polyacrylate homopolymer and dodecyltrimethylammonium surfactant were evaluated. By employing different characterization techniques, it was seen that dispersions prepared by the MS approach display nanometric spherical particles with disordered cores, and poor colloidal stability, partially caused by the absence of surface charge (ζ-potential close to zero). Oppositely, anisometric particles were formed in CS dispersions and were large enough to sustain micellar cubic cores. The CS particles presented long-time colloidal stability, partially due to a net negative surface charge, but the stability varied with the length of the neutral block composing the corona. Our results demonstrate that all dispersed particles are metastable structures, with physicochemical properties strongly dependent on the preparation procedure, thus making these particles suitable for fundamental studies and potential applications where accurate control of their properties, including size, shape, internal structure, and stability, is desired.

RESUMEN

We used diblock poly(acrylic acid)-b-poly(2-dimethylamino ethyl methacrylate) (PAA-b-PDMAEMA) polyampholytes to prepare core-shell complexes with ionic surfactants. The dispersions have been characterized by means of small-angle X-ray scattering (SAXS), cryogenic transmission electron microscopy (Cryo-TEM), dynamic light-scattering, and zeta potential methods. Using cationic or anionic surfactants it is possible to produce particles with either positively or negatively charged shells, both having an internal liquid-crystalline core structure. For the different systems, different preparation protocols were found to be successful to produce stable and reproducible particles. The particle morphologies depend on the surfactant used. Complexes with the cationic surfactant hexadecyltrimethylammonium (CTA+) form oblate particles, while complexes with dodecyl sulfate (DS-) form cylindrical rods. In both complexes, the smallest dimension of the core does not exceed twice the block length of the core-forming polymer block. For the particles with CTA+, nonelectrostatic attractive interactions among the PDMAEMA chains in the shells seem to be present, affecting the particle shape. In both types of particles, the surfactant in the core forms rod-like aggregates, arranged in a two-dimensional hexagonal structure with the surfactant rods aligned with the axis of rotational symmetry in the particle. With charged polymer chains in the shell, the aggregates present a striking stability over time, displaying no change in particle size over the time scale investigated (10 months). Nevertheless, the aggregates are highly dynamic in nature, and their shapes and structures can be changed dramatically in dispersion, without intermediate precipitation, by changes in the composition of the medium. Specifically, a transition from aggregates with cationic surfactant to aggregates with anionic surfactant can be achieved.

RESUMEN

Internally structured block copolymer-surfactant particles are formed when the complex salts of ionic-neutral block copolymers neutralized by surfactant counterions are dispersed in aqueous media. Here, we report the 1H NMR signal intensities and self-diffusion coefficients (D, from pulsed field gradient nuclear magnetic resonance, PFG NMR) of trimethyl alkylammonium surfactant ions and the poly(acrylamide)-block-poly(acrylate) (PAAm-b-PA) polyions forming such particles. The results reveal the presence of an "NMR-invisible" (slowly exchanging) fraction of aggregated surfactant ions in the particle core and an "NMR-visible" fraction consisting of surface surfactant ions in rapid exchange with the surfactant ions dissociated into the aqueous domain. They also confirm that the neutral PAAm blocks are exposed to water at the particle surface, while the PA blocks are buried in the particle core. The self-diffusion of the polyions closely agree with the self-diffusion of a hydrophobic probe molecule solubilized in the particles, showing that essentially all copolymer chains are incorporated in the aggregates. Through centrifugation, we prepared macroscopically phase-separated systems with a phase concentrated in particles separated from a clear dilute phase. D values for the surfactant and block copolymer indicated that the dilute phase contained small aggregates (ca. 5 nm) of surfactant ions and a few anionic-neutral block copolymer chains. Regardless of the overall concentration of the sample, the fraction of block copolymer found in the dilute phase was nearly constant. This indicates that the dilute fraction represented a tail of small particles created by the dispersion process rather than a true thermodynamic solubility of the complex salts.

RESUMEN

Poly(acrylamide)-b-complex salts made from a symmetric poly(acrylate-b-acrylamide) block copolymer, where the acrylate charges are neutralized by cationic surfactant counterions, form kinetically stable aqueous dispersions of hierarchical aggregates with a liquid-crystalline complex salt core and a diffuse hydrated shell. By the addition of suitable amounts of long-chain alcohols, such as octanol or decanol, the structure of the internal phase can be varied, producing micellar cubic, hexagonal, lamellar, or reverse hexagonal liquid-crystalline phases. In addition, a disordered reverse micellar phase forms at the highest content of octanol. These core structures are the same as those previously obtained for macroscopic homopolymer poly(acrylate) complex salt/water/n-alcohol systems at the corresponding compositions. The poly(acrylamide)-b-complex salt dispersions are kinetically stable for several weeks, with their colloidal properties and internal structures remaining unchanged. The methodology described here establishes an easy and robust protocol for the preparation of colloidal nanoparticles with variable but controlled internal structures.

RESUMEN

The presence of acid groups with different pK(a) values in the anionic copolymer poly(4-styrene sulfonic acid-co-maleic acid), P(SS-Ma), allowed the preparation of complex salts with a variable fraction of anionic groups neutralized by cationic surfactant in the copolymer via controlled titration with hexadecyltrimethylammonium hydroxide, C(16)TAOH. Two new complex salts were selected for detailed phase studies, C(16)TA(2)P(SS-Ma) and C(16)TA(3)P(SS-Ma), where both had 100% charged styrene sulfonate groups, but the fraction of charged carboxylate groups on the polyion was 50% or 100%, respectively. These complex salts thus contained both hydrophobic (styrene sulfonate) and hydrophilic (carboxylate) charged groups, and the ratio between the two could be altered by titration. These features were found to have consequences for the phase behavior in water and in ternary mixtures with water and n-alcohols for the two complex salts, which differed compared to complex salts containing homo- or copolyions with only carboxylate or styrene sulfonate charged groups. For both complex salts, binary mixtures with water produced, in the dilute region, two isotropic phases in equilibrium, the bottom (concentrated) one displaying increasing viscosity with increasing concentration. For the complex salt C(16)TA(2)P(SS-Ma), there was evidence of micellar growth to form anisometric aggregates at high concentrations. For the C(16)TA(3)P(SS-Ma) complex salt, this was not observed, and the isotropic phase was followed by a narrow region of cubic phase. In both cases, concentrations above ca. 60 wt % produced a hexagonal phase. For ternary mixtures with n-alcohols, the general trend was that a short-chain alcohol such as n-butanol acted as a cosolvent dissolving the aggregates, whereas with n-decanol, a cosurfactant effect was observed, inducing the formation of lamellar phases. Visual inspection (also between crossed polarizers), small angle X-ray scattering (SAXS) and diffusion nuclear magnetic resonance (NMR) were used in these studies.

Asunto(s)

Alcoholes/química , Maleatos/química , Poliestirenos/química , Tensoactivos/química , Agua/química , Ácidos/química , Iones/química , Estructura Molecular , Transición de Fase , Sales (Química)/química

RESUMEN

Phase behavior and structural features were investigated for "complex salts", consisting of the cationic hexadecyltrimethylammonium (CTA) surfactant with polyacrylate (PA(n), n = 30 or 6000) counterions, mixed with water and different n-alcohols (ethanol, butanol, hexanol, octanol, and decanol). The liquid crystalline structures formed were identified by small-angle X-ray scattering measurements, which provided information about the changes in the geometry of the aggregates as functions of the concentration and chain length of the added n-alcohol. The obtained results were compared with a previous work on similar ternary mixtures of the same cationic surfactant but with the monomeric bromide counterion, CTABr (Fontell, K.; Khan, A.; Lindström, B.; Maciejewska, D.; Puang-Ngern, S. Colloid Polym. Sci., 1991, 269, 727). In general, the same phases were detected in systems with the complex salts CTAPA(n) as in systems with CTABr, but the swelling of the various liquid crystalline phases by water was much more limited in the complex salt systems. An isotropic alcoholic phase was observed with all alcohols and the size of this region of the phase diagram increased for the shorter alcohols, except for ethanol. For mixtures with octanol and ethanol, in particular, the extensions of the disordered isotropic phases were larger for the complex salt with the shorter polyacrylate ions.

RESUMEN

The phase behavior of ternary mixtures containing an alkyltrimethylammonium polyacrylate complex salt, water, and a nonpolar "oil" (n-decanol, p-xylene or cyclohexane) is investigated. The complex salts were prepared with short or long polyacrylates (30 or 6000 repeating units) and with hexadecyltrimethylammonium or dodecyltrimethylammonium surfactant ions. Phase diagrams and structures were determined by visual inspection and small-angle X-ray scattering analyses. Systems containing decanol display a predominance of lamellar phases, while hexagonal phases prevail in systems containing p-xylene or cyclohexane. The difference is interpreted as a result of the different locations of the oils within the surfactant aggregates. Decanol is incorporated at the aggregate interface, leading to a decrease in its curvature, which favors the appearance of lamellar structures. p-Xylene and cyclohexane, on the other hand, are mostly incorporated in the interior of the cylindrical aggregate, as reflected by its swelling as the oil content increases. The comparison of these results with those reported for similar systems with monovalent (bromide) counterions indicates a much more limited swelling of the lamellar phases with polymeric counterions by water. This limited swelling behavior is predominantly ascribed to bridging due to the polyions.