RESUMEN

Single-layer MoS2-carbon nanocomposites (SLMoS2/C) are facilely prepared via a dopamine (DOPA)-Mo(VI) complexation-assisted approach. The large interlayer spacing, sandwich structure and crumpled nanosheet morphology of SLMoS2/C render it excellent electrochemical performances as a lithium-ion battery anode, showing a reversible capacity of 500 mA h g(-1) at a discharge rate of 5 A g(-1).

Asunto(s)

RESUMEN

In this article, liquid moisture transport behaviors of dual-layer electrospun nanofibrous mats are reported for the first time. The dual-layer mats consist of a thick layer of hydrophilic polyacrylonitrile (PAN) nanofibers with a thin layer of hydrophobic polystyrene (PS) nanofibers with and without interpenetrating nanopores, respectively. The mats are coated with polydopamine (PDOPA) to different extents to tailor the water wettability of the PS layer. It is found that with a large quantity of nanochannels, the porous PS nanofibers exhibit a stronger capillary effect than the solid PS nanofibers. The capillary motion in the porous PS nanofibers can be further enhanced by slight surface modification with PDOPA while retaining the large hydrophobicity difference between the two layers, inducing a strong push-pull effect to transport water from the PS to the PAN layer.

RESUMEN

Inspired by the high transition-metal-ion content in mussel glues, and the cross-linking and mechanical reinforcement effects of some transition-metal ions in mussel threads, high concentrations of nickel(II), cobalt(II), and manganese(II) ions have been purposely introduced into the reaction system for dopamine polymerization. Kinetics studies were conducted for the Ni(2+)-dopamine system to investigate the polymerization mechanism. The results show that the Ni(2+) ions could accelerate the assembly of dopamine oligomers in the polymerization process. Spectroscopic and electron microscopic studies reveal that the Ni(2+) ions are chelated with polydopamine (PDA) units, forming homogeneous Ni(2+)-PDA complexes. This facile one-pot approach is utilized to construct transition-metal-ion-PDA complex thin coatings on graphene oxide, which can be carbonized to produce robust hybrid nanosheets with well-dispersed metallic nickel/metallic cobalt/manganese(II) oxide nanoparticles embedded in PDA-derived thin graphitic carbon layers. The nickel-graphene hybrid prepared by using this approach shows good catalytic properties and recyclability for the reduction of p-nitrophenol.

Asunto(s)

RESUMEN

In this work, highly flexible MoS2-based lithium-ion battery anodes composed of disordered thin MoS2 nanoflakes encapsulated in amorphous carbon nanofibrous mats were fabricated for the first time through hydrothermal synthesis of graphene-like MoS2, followed by electrospinning and carbonization. X-ray diffraction as well as scanning and transmission electron microscopic studies show that the as-synthesized MoS2 nanoflakes have a thickness of about 5 nm with an expanded interlayer spacing, and their structure and morphology are well-retained after the electrospinning and carbonization. At relatively low MoS2 contents, the nanoflakes are dispersed and well-embedded in the carbon nanofibers. Consequently, excellent electrochemical performance, including good cyclability and high rate capacity, was achieved with the hybrid nanofibrous mat at the MoS2 content of 47%, which may be attributed to the fine thickness and multilayered structure of the MoS2 sheets with an expanded interlayer spacing, the good charge conduction provided by the high-aspect-ratio carbon nanofibers, and the robustness of the nanofibrous mat.

RESUMEN

In this work, bundles of rutile TiO2 nanoneedles/nanorods are hydrothermally grown on carbon nanofibers (CNFs), forming free-standing mats consisting of three dimensional hierarchical nanostructures (TiO2-on-CNFs). Morphologies and structures of the TiO2-on-CNFs are studied using a field-emission scanning electron microscope (FESEM), transmission electron microscope (TEM), X-ray diffractometer (XRD) and thermogravimetric analyzer (TGA). Their electrochemical properties as electrodes in lithium ion batteries (LIBs) are investigated and correlated with the morphologies and structures. It is shown that the lateral size of the TiO2 nanoneedles/nanorods ranges from a few nanometers to tens of nanometers, and increases with the hydrothermal temperature. Small interspaces are observed between individual nanoneedles/nanorods, which are due to the diverging arrangement of nanoneedles/nanorods induced by growing on the convex surface of nanocylinders. It is found that the growth process can be divided into two stages: initial growth on the CNF surface and further growth upon re-nucleation on the TiO2 bundles formed in the initial growth stage. In order to achieve good electrochemical performance in LIBs, the size of the TiO2 nanostructures needs to be small enough to ensure complete alloying and fast charge transport, while the further growth stage has to be avoided to realize direct attachment of TiO2 nanostructures on the CNFs, facilitating electron transport. The sample obtained after hydrothermal treatment at 130 °C for 2 h (TiO2-130-2) shows the above features and hence exhibits the best cyclability and rate capacity among all samples; the cyclability and rate capacity of TiO2-130-2 are also superior to those of other rutile TiO2-based LIB electrodes.

Asunto(s)

RESUMEN

Silicon (Si) is a promising material for lithium ion battery (LIB) anodes due to its high specific capacity. To overcome its shortcomings such as insulation property and large volume change during the charge-discharge process, a novel hybrid system, Si nanoparticles encapsulated in hollow graphitized carbon nanofibers, is studied. First, electrospun polyacrylonitrile (PAN)-Si hybrid nanofibers were obtained using water as the collector. The loose nanofiber lumps suspended in water have large inter-fiber distance, allowing in situ coating of a thin layer of polydopamine (PDA), the source for graphitized carbon, uniformly throughout the system. The designed morphology and structure were then realized by etching and calcination, and the morphology and structure were subsequently verified by various analytical techniques. Electrochemical measurements show that the resulting hollow hybrid nanofibers (C-PDA-Si NFs) exhibit much better cycling stability and rate capacity than conventional C/Si nanofibers derived by electrospinning of PAN-Si followed by calcination. For instance, the capacity of C-PDA-Si NFs is as high as 72.6% of the theoretical capacity after 50 cycles, and a high capacity of 500 mA h g(-1) can be delivered at a current density of 5 A g(-1). The significantly improved electrochemical properties of C-PDA-Si NFs are due to the excellent electrical conductivity of the carbonized PDA (C-PDA) shell that compensates for the insulation property of Si, the high electrochemical activity of C-PDA, which has a layered structure and is N-doped, the hollow nature of the nanofibers and small size of Si nanoparticles that ensure smooth insertion-extraction of lithium ions and more complete alloying with them, as well as the buffering effect of the remaining PAN-derived carbon around the Si nanoparticles, which stabilizes the structure.

RESUMEN

Clay-based functional hydrogels were facilely prepared via a bioinspired approach. Montmorillonite (clay) was exfoliated into single layers in water and then coated with a thin layer of polydopamine (PDOPA) via in situ polymerization of dopamine under basic aqueous conditions. When a small amount of ferric salt was added into aqueous suspensions of the polydopamine-coated clay (D-clay), D-clay and Fe(3+) ions could rapidly self-assemble into three-dimensional networks through the formation of coordination bonds. Consequently, supramolecular hydrogels were formed at very low D-clay contents. Rheological measurements show that the D-clay/Fe(3+) hydrogels exhibit fairly elastic response in low stain range, and have self-healing capability upon removal of applied large stress. More importantly, the hydrogels can be used as adsorbents to effectively remove Rhodamine 6G (Rh6G), an organic pollutant, from water. UV-vis absorption spectra of the Rh6G-loaded hydrogels show bands related to π-π stacking interactions between the aromatic moieties of PDOPA and Rh6G, confirming the formation of PDOPA/Rh6G complex on the surface of D-clay.

RESUMEN

Inspired by the radical scavenging function of melanin-like materials and versatile adhesive ability of mussel-adhesion proteins, dopamine-modified clay (D-clay) was successfully incorporated into polypropylene (PP) using an amine-terminated PP oligomer as the compatibilizer. Although the PP/D-clay nanocomposites exhibit intercalated morphology, the incorporation of D-clay greatly improves the thermo-oxidative stability and UV resistance of PP owing to the strong radical scavenging ability of polydopamine (PDA) and large contact area between PP and the PDA coating on clay mineral. Moreover, the reinforcement effect brought by D-clay is fairly significant at very low clay loadings probably owing to the strong interfacial interactions between the layered silicates and the compatibilizer as well as that between the compatibilizer and the PP matrix. The work demonstrates that D-clay is a type of promising nanofiller for thermoplastics used for outdoor applications since it stabilizes and reinforces the polymers simultaneously.

Asunto(s)

RESUMEN

Thin carbonized polydopamine (C-PDA) coatings are found to have similar structures and electrical conductivities to those of multilayered graphene doped with heteroatoms. Greatly enhanced electrochemical properties are achieved with C-PDA-coated SnO(2) nanoparticles where the coating functions as a mechanical buffer layer and conducting bridge.

Asunto(s)

RESUMEN

Dopamine-modified clay (D-clay) was successfully dispersed into polyether polyurethane (PU) by solvent blending. It is found that the incorporation of D-clay into PU gives rise to significant improvements in mechanical properties, including initial modulus, tensile strength, and ultimate elongation, at a very low clay loading. The large reinforcement could be attributed to the hydrogen bonds between the hard segments of PU and stiff D-clay layers that lead to more effective interfacial stress transfer between the polymer and D-clay. Besides, the interactions between D-clay and PU are also stronger than those between Cloisite 30B organoclay and the PU chains. Consequently, at a similar clay loading, the PU/D-clay nanocomposite has much higher storage modulus than the PU/organoclay nanocomposite at elevated temperatures.

RESUMEN

Polydopamine-coated graphene oxide (DGO) films exhibit electrical conductivities of 11,000 S m(-1) and 30,000 S m(-1) upon vacuum annealing at 130 °C and 180 °C, respectively. Conductive poly(vinyl alcohol)/graphene and epoxy/graphene nanocomposites show low percolation thresholds due to the excellent dispersibility of the DGO sheets and their effective in situ reduction.

Asunto(s)

RESUMEN

A facile biomimetic method was developed to enhance the interfacial interaction in polymer-layered silicate nanocomposites. By mimicking mussel adhesive proteins, a monolayer of polydopamine was constructed on clay surface by a controllable coating method. The modified clay (D-clay) was incorporated into an epoxy resin, it is found that the strong interfacial interactions brought by the polydopamine benefits not only the dispersion of the D-clay in the epoxy but also the effective interfacial stress transfer, leading to greatly improved thermomechanical properties at very low inorganic loadings. Rheological and infrared spectroscopic studies show that the interfacial interactions between the D-clay and epoxy are dominated by the hydrogen bonds between the catechol-enriched polydopamine and the epoxy.

Asunto(s)