RESUMEN

OBJECTIVE: The aim of this study was to assess the risk of sleep-disordered breathing (SDB) in orthodontic patients and to evaluate the influence of sex, age, and orthodontic treatment in a cohort of subjects using the Pediatric Sleep Questionnaire (PSQ) screening tool. METHODS: Parents of 245 patients aged 5-18 years (11.4 ±â€…3.3 years) were invited to participate in the study by answering the PSQ, which has 22 questions about snoring, sleepiness, and behavior. The frequency of high and low risk was calculated for the full sample. Multiple logistic regression was used to assess the association among sex, age, orthodontic treatment, rapid maxillary expansion (RME), and body mass index (BMI) with SDB. A significance level of 5% (P < .05) was adopted in all tests. RESULTS: A high risk of SDB was found in 34.3% of the sample. No sex and BMI difference was found for the risk of SDB. The high risk of SDB was significantly associated with younger ages (OR = 1.889, P = .047), pre-orthodontic treatment phase (OR = 3.754, P = .02), and RME (OR = 4.157, P = .001). LIMITATIONS: Lack of ear, nose and throat-related medical history. CONCLUSION: Children showed a 1.8 higher probability of having a high risk of SDB compared with adolescents. Patients before orthodontic treatment and patients submitted to RME showed a high risk of SDB.

Asunto(s)

RESUMEN

OBJECTIVES: To evaluate the impact of printer technology and print orientation on the accuracy of directly printed retainers. MATERIALS AND METHODS: Digital retainers were printed with two different printing technologies: digital light processing (DLP) and stereolithography (SLA), using two different orientations: 0° and 90°. After printing, the retainers (n = 40) were scanned using cone-beam computed tomography. The DICOM files were then converted into standard tessellation language (STL) files. Comparison of the printed retainers with a master file was done by superimposition using a three-dimensional (3D) best-fit tool in Geomagic software. A ±0.25 mm tolerance was set to detect differences between the superimposed files. Statistical analysis was conducted (Kruskal-Wallis and Wilcoxon-Mann-Whitney tests, with Bonferroni correction). RESULTS: The lowest median average deviation was observed for the DLP horizontally printed models (median, [interquartile range (IQR)] = 0.01 mm, [-0.01, 0.02]) followed by the SLA horizontally printed retainers (median, [IQR] = 0.05 mm, [0.03, 0.07]). The highest median inside the tolerance levels ratio was observed for the horizontally SLA printed retainers (median, [IQR] = 78.9%, [74.4, 82.4%]) followed by the horizontally DLP printed retainers (median, [IQR] = 78.2%, [74.5, 80.7%]). CONCLUSIONS: Both technologies (DLP and SLA) showed 3D printed results compatible with orthodontic clinical needs. Printing orientation was more important than printer type regarding its accuracy. Additional studies are needed to evaluate the accuracy of direct printed appliances clinically.

RESUMEN

Background: Canine retraction has been successful with various force systems and retraction techniques. The appointment interval for force reactivation in canine retraction along the archwire is 4-8 weeks. Aims: The aim was to evaluate the effect of different reactivation intervals on the rate of space closure. Settings and Design: This split-mouth randomized clinical trial recruited 38 patients indicated for the first premolar extraction. Methods: Monthly digital models were acquired for 6 months. The first premolars were extracted, and temporary anchorage devices were placed for maximum anchorage control. The canines were retracted using elastomeric chains which were replaced every 2, 4, 6, or 8 weeks. The monthly rate of canine retraction was measured. The time to space closure was calculated. The secondary outcome was the mesial drift of the first molars. Statistical Analysis: The Kaplan-Meier survival analysis and the Friedman test evaluated and compared the groups. Results: There was no significant difference between the monthly canine retraction rate or the first molar mesial drift between the groups. The mean time to space closure was 5.74 months in the 2-week reactivation group, which was statistically less than the other groups. Conclusions: The 2-week reactivation interval may reduce time to space closure. Direct anchorage control with miniscrews limited anchorage loss significantly.

RESUMEN

BACKGROUND AND OBJECTIVE: The accurate diagnosis of temporomandibular disorders continues to be a challenge, despite the existence of internationally agreed-upon diagnostic criteria. The purpose of this study is to review applications of deep learning models in the diagnosis of temporomandibular joint arthropathies. MATERIALS AND METHODS: An electronic search was conducted on PubMed, Scopus, Embase, Google Scholar, IEEE, arXiv, and medRxiv up to June 2023. Studies that reported the efficacy (outcome) of prediction, object detection or classification of TMJ arthropathies by deep learning models (intervention) of human joint-based or arthrogenous TMDs (population) in comparison to reference standard (comparison) were included. To evaluate the risk of bias, included studies were critically analysed using the quality assessment of diagnostic accuracy studies (QUADAS-2). Diagnostic odds ratios (DOR) were calculated. Forrest plot and funnel plot were created using STATA 17 and MetaDiSc. RESULTS: Full text review was performed on 46 out of the 1056 identified studies and 21 studies met the eligibility criteria and were included in the systematic review. Four studies were graded as having a low risk of bias for all domains of QUADAS-2. The accuracy of all included studies ranged from 74% to 100%. Sensitivity ranged from 54% to 100%, specificity: 85%-100%, Dice coefficient: 85%-98%, and AUC: 77%-99%. The datasets were then pooled based on the sensitivity, specificity, and dataset size of seven studies that qualified for meta-analysis. The pooled sensitivity was 95% (85%-99%), specificity: 92% (86%-96%), and AUC: 97% (96%-98%). DORs were 232 (74-729). According to Deek's funnel plot and statistical evaluation (p =.49), publication bias was not present. CONCLUSION: Deep learning models can detect TMJ arthropathies high sensitivity and specificity. Clinicians, and especially those not specialized in orofacial pain, may benefit from this methodology for assessing TMD as it facilitates a rigorous and evidence-based framework, objective measurements, and advanced analysis techniques, ultimately enhancing diagnostic accuracy.

Asunto(s)

RESUMEN

INTRODUCTION: The purpose of this study was to examine the use of orthodontic 3-dimensional (3D) printing technology in North America and to understand why orthodontists are, or are not, incorporating 3D printing technology in their practices. METHODS: A survey questionnaire was delivered on a secure online platform, RedCap (Case Western Reserve University Clinical and Translational Science Award; no. UL1TR002548). The survey consisted of 14-34 items with branching logic. The association between participant demographics and in-house 3D printing was assessed using a chi-square test of independence. RESULTS: A total of 518 responses were recorded. The highest number of responses came from respondents in the 36-45-year age group. Most of the respondents were practice owners; 46.9% had 3D printers in their office. Chi-square tests of independence were performed on the data to see which associations existed. The strongest statistical associations with using an in-house 3D printer are seen with patient load, practice type, years since residency, and orthodontist's position. CONCLUSIONS: Approximately 75% of orthodontists use 3D printing technology in some capacity in North America. Major factors that influenced orthodontists to incorporate 3D printing technology into their office were self-interest and research. Major factors that have prevented orthodontists from not incorporating 3D printing technology into their office were space for equipment/ventilation and digital workflow training deficit. Orthodontists use their 3D printers mostly to make plastic retainers from printed models. The strongest associations with using in-house 3D printers are seen in patient load, practice type, years since residency, and orthodontist position. Increasing patient load and being in private practice increases the likelihood of having a 3D printer.

Asunto(s)

RESUMEN

BACKGROUND: This single-centered randomized controlled clinical trial aimed to evaluate the effectiveness of micro-osteoperforations (MOPs) in accelerating the orthodontic retraction of maxillary incisors. METHODS: Forty-two patients aged 16-40 were recruited and randomly assigned into two groups, one which underwent MOPs (MOPG) in the buccal and palatal region of all maxillary incisors immediately before the start of retraction and one which did not (CG). Eligibility criteria included the orthodontic need for maxillary first premolars extraction and space closure in two phases. The primary outcome of the study consisted of measuring the rate of space closure and, consequently, the rate of incisors' retraction using digital model superimposition 14 days later and monthly thereafter for the next 4 months. The secondary outcomes included measuring anchorage loss, central incisors' inclination, and root length shortening, analyzed using cone beam computed tomography scans acquired before retraction and 4 months after retraction. Randomization was performed using QuickCalcs software. While clinical blinding was not possible, the image's examinator was blinded. RESULTS: Twenty-one patients were randomly assigned to each group. However, due to various reasons, a total of 37 patients (17 male and 20 female) were analyzed (mean age: 24.3 ± 8.1 years in the MOPG; 22.2 ± 4.2 years in the CG) during the trial. No statistically significant difference was found between the MOPG and the CG regarding the incisors' retraction measured at different time points at the incisal border (14 days, 0.4 mm vs. 0.5 mm; 1 month, 0.79 mm vs. 0.77 mm; 2 months, 1.47 mm vs. 1.41 mm; 3 months, 2.09 mm vs. 1.88 mm; 4 months, 2.62 mm vs. 2.29 mm) and at the cervical level (14 days, 0.28 mm vs. 0.30 mm; 1 month, 0.41 mm vs. 0.32 mm; 2 months, 0.89 mm vs. 0.61 mm; 3 months, 1.36 mm vs. 1.10 mm; 4 months, 1.73 mm vs. 1.39 mm). Similarly, no statistically significant differences were detected in the space closure, anchorage loss, central incisors' inclination, and radicular length between groups. No adverse effect was observed during the trial. CONCLUSIONS: MOPs did not accelerate the retraction of the maxillary incisors, nor were they associated with greater incisor inclination or root resorption. Trial registration ClinicalTrials.gov NCT03089996. Registered 24 March 2017- https://clinicaltrials.gov/ct2/show/NCT03089996 .

Asunto(s)

RESUMEN

INTRODUCTION: Orthodontists attempt to maximize treatment efficiency regarding time, tooth position and adverse effects. A new approach, not yet explored, is the activation frequency. OBJECTIVE: The aim of this split-mouth randomized controlled trial was to evaluate the effect of reactivation intervals on the efficiency of tooth movement. METHODS: Thirty eight patients having a Class I malocclusion with bimaxillary dentoalveolar protrusion or severe crowding, Class II with mandibular deficiency or Class III, requiring first premolar extraction and canine retraction were recruited. Elastomeric chains producing 150g were replaced every two, four, six or eight weeks. There were 36, 37, 36, and 36 quadrants randomly allocated to these groups, respectively. The canine retraction rate was the primary outcome. Canine tipping, rotation, and root resorption and pain were the secondary outcomes. Only the outcome assessors were blinded to group assignment. RESULTS: The average total movement for the 6 months was 5.14, 5.31, 2.79 and 3.85 mm for the two-week, four-week, six-week and eight-week reactivation intervals, respectively. Root resorption was significantly higher in the two-week and four-week groups. No adverse events were observed. CONCLUSION: The canine retraction rate, tipping, rotation and pain were similar in 2, 4, 6 and 8-week activation intervals groups. Longer reactivation intervals show less root resorption. The trial protocol was not pre-registered. The study was self-funded.

Asunto(s)

RESUMEN

Aims and Objectives: To perform a bibliometric study to identify and evaluate articles associated with "orthodontic wires" indexed in six databases (PubMed, Embase, Cochrane, Scopus, Lilacs, and Google Scholar) from 2010 to 2022. Materials and Methods: The search strategy in PubMed combined different medical subject heading terms with free-text words and was adjusted for each selected database. The retrieved documents were original English articles containing the keywords used in the search strategies related to orthodontic wires. Collected data consisted of journal name, nationality, field, JIF-2 and JIF-5, SJR, CiteScore, Q and H-index, and categorization of the study. Results: In total, 417 articles were retrieved from the initial search. After the exclusion criteria, 257 articles remained. The most common theme was mechanical properties, with basic studies as the main categorization. Conclusions: This bibliometric survey provides an overview of orthodontic wires publications that might help orthodontists to understand the tendency of the studies on this subject. The retrieved papers were published in 100 journals, including 15 orthodontic journals, mainly in the first and second quartiles. Europe and America were the continents with the highest number of papers. The United States was the country with the highest number of journals on the topic. AJODO presented the highest h-index among the retrieved orthodontic journals. Brazil represented the principal institutions of origin of the listed articles. There was a tendency to increase the number of publications on orthodontic wires over the years. These findings indicate that research on orthodontic wires is still contemporary and relevant.

RESUMEN

OBJECTIVES: To evaluate the outcome of treating deep overbite (OB) using anterior bite elevators concurrently with a pre-adjusted edgewise appliance. MATERIALS AND METHODS: The Case Western Reserve University (CWRU) cephalometric analysis was used to isolate tipping movement of upper (TUI) and lower incisors (TLI), bodily tooth movement of upper (BUI), and lower incisors (BLI), as well as vertical skeletal changes in the anterior region of the maxilla (MXSK) and mandible (MNSK). Thirty treated subjects were examined at pretreatment (T1) and posttreatment (T2) and compared to an untreated control group matched on age, sex, and Angle malocclusion from the Bolton Brush Growth Study Collection (CWRU, Cleveland, Ohio). RESULTS: Overbite (OB) in the treated group was decreased significantly (P < .001) (-5.6 mm) compared to controls. Statistically significant (P < .001) changes were found for BUI (-0.7 mm), TUI (0.9 mm), TLI (-1.4 mm), BLI (-1.1 mm), and MNSK (-1.6 mm). Most of the overbite correction was in the lower arch and included tipping and intrusion of the lower incisors along with an increase in lower vertical facial height. CONCLUSIONS: Deep OB correction was achieved efficiently using anterior bite elevators with pre-adjusted edgewise appliance. Correction using bite turbos would be a treatment option for individuals presenting with decreased lower facial height and deep bite.

Asunto(s)

RESUMEN

INTRODUCTION: Obstructive sleep apnea (OSA) affects an important part of the population and is characterized by recurrent total or partial obstruction of the upper airway (UA) during sleep, negatively affecting the quality of life of patients in the short and long terms, and constituting an important public health problem for the society. The field of expertise of orthodontists is closely related to the UA, placing them in a strategic position to diagnose air passage failures and intervene when necessary. Orthodontists, as health professionals, must know how to recognize respiratory problems and manage them appropriately, when indicated. OBJECTIVE: Thus, this paper aims to review and critically evaluate the related literature, to provide orthodontists with updated knowledge on the diagnosis and therapy related to OSA. Science and technology are constantly evolving; thus, the literature was also reviewed considering new technologies available in consumer-targeted applications and devices for the diagnosis, monitoring, and treatment of sleep-disordered breathing.

Asunto(s)

RESUMEN

BACKGROUND: The aim of this study was to compare the outcomes of the same amount of tooth movement among four different virtual setup software programs. METHODS: This retrospective study included 32 patients who underwent Invisalign treatment. Patients' initial stereolithography (STL) files were imported to three different software programs (SureSmile Aligner [Dentsply Sirona, Charlotte, NC], Ortho Insight 3D [Motion View software, Chattanooga, TN], and Ortho Analyzer [3Shape, Copenhagen, Denmark]). After virtually moving teeth based on the numbers from ClinCheck Pro (Align Technology, Inc., Santa Clara, CA) tooth movement tables, final STL files were exported from all four software programs. ClinCheck Pro final STL files were used as references, while final STL files from the other software programs were used as targets. Superimpositions were performed between references and target STL files using Geomagic Control X software (3D Systems, Rock Hill, SC), and color-coded maps were obtained to illustrate potential differences. RESULTS: Intraclass correlation coefficient showed a high degree of reliability for repeated methodology (0.995-0.997). The differences among absolute averages (Abs Avg.), averages of positive values (+Avg.), and negative values (-Avg.) for both upper and lower models were significant among all software programs (ClinCheck Pro, SureSmile Aligner, Ortho Insight 3D, and Ortho Analyzer), for both upper and lower STL files, the smallest difference was found between ClinCheck Pro and SureSmile Aligner with a median of (0.03, 0.31, -0.19) mm for upper and (0.02, 0.29, -0.17) mm for lower STL files (Abs Avg., +Avg. and -Avg.), respectively. The biggest difference was found to be between ClinCheck Pro and Ortho Analyzer with a median of (0.05, 0.46, -0.45) mm for upper and (0.06, 0.48, -0.40) mm for lower STL files. There were no significant differences in the number of aligners per patient. CONCLUSIONS: Final outcomes of the same amount of tooth movement in four different software programs differed significantly. The number of aligners per patient remained unchanged.

Asunto(s)

RESUMEN

PURPOSE: The aim of the present work was to study the sequence of skeletal maturation in the various anteroposterior and vertical skeletal growth patterns and to detect whether differences existed between them. METHODS: Cephalograms of 861 growing and adolescent female patients were traced to categorize the subjects into 9 skeletal patterns. Each subject was assigned a skeletal maturational stage. Analysis of variance (ANOVA) followed by Bonferroni test were used to detect differences in the onset of the three growth stages (prepubertal, pubertal and postpubertal) between the 9 groups. The same statistical methods were used to detect differences between the mean ages at the three growth stages within each group. RESULTS: No statistically significant differences were found between the mean ages of pubertal and postpubertal growth stages between the 9 skeletal patterns. However, class III growers had a significantly earlier onset of prepubertal growth (10.25 ± 1.56 years) when compared to that of class II high angle cases (11.11 ± 1.67 years; P < 0.01). Also, significant differences were found between the mean ages at the three growth stages within the groups. CONCLUSION: A map was created defining the sequence of skeletal maturation for each skeletal growth pattern. This map defines clinically relevant differences in the starting time points and the optimum intervals of growth modification for each skeletal growth pattern.

Asunto(s)

RESUMEN

OBJECTIVE: To explore alveolar cortical positional change in response to tooth movement in extraction and non-extraction orthodontic cases, using cone-beam computed tomography (CBCT) and stable extra-alveolar references. MATERIALS AND METHODS: The pre-treatment (T1) and post-treatment (T2) CBCT scans of 25 extraction (EXT) and matched 25 non-extraction (Non-EXT) orthodontic cases were imported into Dolphin Imaging 3D, and oriented uniformly. Sagittal and axial CBCT cross-sections were traced using customized software-generated guides. The displacement of teeth and alveolar bone cortices were automatically measured using the palatal plane (PP) and the line perpendicular to PP and passing Sella as reference. Intra- and inter-group differences between T1 and T2 were analysed. Subjects were also superimposed three-dimensionally using Geomagic Control X for qualitative analysis of cortical remodelling. RESULTS: The EXT group showed incisor retraction, while the Non-EXT group exhibited statistically significant incisor anterior tipping (P < .05). In EXT, both the labial and palatal cortices are resorbed. Non-EXT showed labial cortex anterior modelling, and statistically significant palatal cortex resorption (P < .05). In both groups, statistically significant decrease in total and palatal alveolar widths, increase in labial widths, and palatal dehiscence were observed. Comparatively, EXT showed significantly more incisal total and palatal width decrease and palatal vertical bone loss. CONCLUSION: Labial cortical remodelling was shown to follow anterior tooth movement, but the palatal cortical response to incisor retraction and labial cortical remodelling in general remained inconclusive. Narrowing of the alveolar housing and palatal dehiscence were observed regardless of extraction following orthodontic treatment.

Asunto(s)

RESUMEN

ABSTRACT Introduction: Obstructive sleep apnea (OSA) affects an important part of the population and is characterized by recurrent total or partial obstruction of the upper airway (UA) during sleep, negatively affecting the quality of life of patients in the short and long terms, and constituting an important public health problem for the society. The field of expertise of orthodontists is closely related to the UA, placing them in a strategic position to diagnose air passage failures and intervene when necessary. Orthodontists, as health professionals, must know how to recognize respiratory problems and manage them appropriately, when indicated. Objective: Thus, this paper aims to review and critically evaluate the related literature, to provide orthodontists with updated knowledge on the diagnosis and therapy related to OSA. Science and technology are constantly evolving; thus, the literature was also reviewed considering new technologies available in consumer-targeted applications and devices for the diagnosis, monitoring, and treatment of sleep-disordered breathing.

RESUMO Introdução: A apneia obstrutiva do sono (AOS) afeta uma importante parcela da população e caracteriza-se pela obstrução total ou parcial recorrente da via aérea superior (VAS) durante o sono, o que afeta negativamente a qualidade de vida dos pacientes no curto prazo e no longo prazo, e constitui importante problema de saúde pública para a sociedade. A área de atuação do ortodontista está em íntima relação com a VAS, o que o coloca em uma posição estratégica para diagnosticar falhas na passagem de ar e intervir quando necessário. É imperativo que o ortodontista, como profissional da saúde, saiba reconhecer problemas respiratórios e manejá-los de maneira apropriada, quando indicado. Objetivo: O objetivo desse artigo é revisar e avaliar criticamente a literatura pertinente, para proporcionar ao ortodontista conhecimento atualizado sobre o diagnóstico e terapêutica relacionados à AOS. Ciência e tecnologia estão em constante evolução; portanto, a literatura também foi revisada considerando as novas tecnologias disponíveis em aplicativos e dispositivos direcionados aos consumidores para o diagnóstico, monitoramento e tratamento dos distúrbios respiratórios do sono.

RESUMEN

ABSTRACT Introduction: Orthodontists attempt to maximize treatment efficiency regarding time, tooth position and adverse effects. A new approach, not yet explored, is the activation frequency. Objective: The aim of this split-mouth randomized controlled trial was to evaluate the effect of reactivation intervals on the efficiency of tooth movement. Methods: Thirty eight patients having a Class I malocclusion with bimaxillary dentoalveolar protrusion or severe crowding, Class II with mandibular deficiency or Class III, requiring first premolar extraction and canine retraction were recruited. Elastomeric chains producing 150g were replaced every two, four, six or eight weeks. There were 36, 37, 36, and 36 quadrants randomly allocated to these groups, respectively. The canine retraction rate was the primary outcome. Canine tipping, rotation, and root resorption and pain were the secondary outcomes. Only the outcome assessors were blinded to group assignment. Results: The average total movement for the 6 months was 5.14, 5.31, 2.79 and 3.85 mm for the two-week, four-week, six-week and eight-week reactivation intervals, respectively. Root resorption was significantly higher in the two-week and four-week groups. No adverse events were observed. Conclusion: The canine retraction rate, tipping, rotation and pain were similar in 2, 4, 6 and 8-week activation intervals groups. Longer reactivation intervals show less root resorption. The trial protocol was not pre-registered. The study was self-funded.

RESUMO Introdução: Os ortodontistas buscam otimizar a eficiência do tratamento quanto ao tempo de duração, à posição dos dentes e aos efeitos adversos. Um aspecto ainda não avaliado são os diferentes intervalos entre as ativações. Objetivo: O objetivo desse estudo controlado e randomizado de boca dividida foi avaliar a influência de diferentes intervalos de reativação na eficiência da movimentação dentária. Métodos: Foram recrutados 38 pacientes com má oclusão de Classe I com biprotrusão dentoalveolar ou apinhamento severo, Classe II com deficiência mandibular ou Classe III, que necessitavam de extração do primeiro pré-molar e retração do canino. As cadeias elastoméricas gerando 150 g foram substituídas a cada duas, quatro, seis ou oito semanas, constando 36, 37, 36 e 36 quadrantes alocados aleatoriamente nesses grupos, respectivamente. O desfecho primário foi a taxa de retração do canino. Os desfechos secundários foram a inclinação, a rotação e a reabsorção radicular do canino, e a dor. Somente os avaliadores dos resultados não tinham conhecimento da alocação nos grupos. Resultados: O movimento total médio para os seis meses foi de 5,14; 5,31; 2,79 e 3,85 mm para os intervalos de reativação de duas semanas, quatro semanas, seis semanas e oito semanas, respectivamente. A reabsorção radicular foi significativamente maior nos grupos de duas e quatro semanas. Não foram observados eventos adversos. Conclusão: A taxa de retração, a inclinação e a rotação do canino e a dor foram semelhantes nos grupos com intervalos de ativação de duas, quatro, seis e oito semanas. Intervalos de reativação mais longos mostram menos reabsorção radicular. O protocolo do estudo não foi pré-registrado. O estudo foi autofinanciado.

RESUMEN

BACKGROUND/OBJECTIVES: The purpose of this study was to compare the differences in tooth movements when implementing the same virtual setup on the following four different software packages: ClinCheck® Pro, Ortho Analyzer®, SureSmile®, and Ortho Insight 3D®. MATERIALS/METHODS: Twenty-five adult patients treated with Invisalign® at the Case School of Dental Medicine (CWRU)'s department of orthodontics were retrospectively collected. Initial stereolithography (STL) files were obtained and imported into three software packages. The teeth were moved in order to replicate the virtual setup from ClinCheck® Pro. The final outcomes were exported from each software package. ClinCheck® Pro STL files were used as the reference while STL files produced by the other software packages were used as the targets. Best fit superimpositions were performed using Geomagic® Control X. Based on the results, tooth position was adjusted in the three software packages until the virtual setups from ClinCheck® Pro were replicated. Once confirmed, the tables containing the tooth movements were compared. The number of aligners and number of attachments automatically generated from each of the software packages were also evaluated. RESULTS: Extrusion/intrusion (p ≤ 0.0001) and translation buccal/lingual (p ≤ 0.0004) were significantly different among the software packages. ClinCheck® Pro and SureSmile® (p ≤ 0.000), SureSmile® and Ortho Insight 3D® (p ≤ 0.014), SureSmile® and Ortho Analyzer® (p ≤ 0.009), and Ortho Insight 3D® and Ortho Analyzer® (p ≤ 0.000) generated a significantly different number of maxillary aligners. The results varied slightly for mandibular aligners, with only ClinCheck® Pro and Ortho Insight 3D® (p ≤ 0.000), SureSmile® and Ortho Insight 3D® (p ≤ 0.000), and Ortho Insight 3D® and Ortho Analyzer® (p ≤ 0.000) exhibiting a significant difference. ClinCheck® Pro and SureSmile® (p ≤ 0.000) differed significantly in the number of attachments produced. CONCLUSIONS: There are statistically significant differences in extrusion/intrusion, translation buccal/lingual, the number of aligners, and the number of attachments when implementing the same virtual setup on different software packages. Clinicians may need to consider this when utilizing software programs for digital diagnosis and treatment planning.

Asunto(s)

RESUMEN

BACKGROUND: Mandibular advancement devices for obstructive sleep apnea treatment are becoming increasingly popular among patients who do not prefer CPAP devices or surgery. Our study aims to evaluate the literature regarding potential dental and skeletal side effects caused by mandibular advancement appliances used for adult OSA treatment. METHODS: Electronic databases were searched for published and unpublished literature along with the reference lists of the eligible studies. Randomized clinical trials and non-randomized trials assessing dental and skeletal changes by comparing cephalometric radiographs were selected. Study selection, data extraction, and risk of bias assessment were performed individually and in duplicate. Fourteen articles were finally selected (two randomized clinical trials and 12 non-randomized trials). RESULTS: The results suggest that mandibular advancement devices used for OSA treatment increase the lower incisor proclination by 1.54 ± 0.16°, decrease overjet by 0.89 ± 0.04 mm and overbite by 0.68 ± 0.04 mm, rotate the mandible downward and forward, and increase the SNA angle by to 0.06 ± 0.03°. The meta-analysis revealed high statistical heterogeneity. CONCLUSIONS: The MADs affect the lower incisor proclination, overjet, overbite, the rotation of the mandible and the SNA angle. More randomized clinical trials providing high-quality evidence are needed to support those findings.

RESUMEN

OBJECTIVES: The aim of this study was to compare the upper airway space changes after miniscrew-anchored maxillary protraction with hybrid (HH) and conventional hyrax (CH) expanders. MATERIAL AND METHODS: The sample comprised Class III malocclusion growing patients that were randomized into two groups of miniscrew-anchored maxillary protraction. The group HH was treated with a hybrid hyrax appliance in the maxilla and two miniscrews distally to the canines in the mandible. Class III elastics were used from the maxillary first molar to the mandibular miniscrews until anterior crossbite correction. The group CH was treated with a similar protocol except for the conventional hyrax expander in the maxilla. Cone-beam computed tomography was obtained before (T1) and after 12 months of therapy (T2). The shape and size of upper airway were assessed. Intergroup comparisons were performed using Mann-Whitney U test (p < 0.05). RESULTS: The group HH was composed of 20 patients (8 female, 12 male) with a mean age of 10.76 years. The group CH was composed of 15 patients (6 female, 9 male) with a mean age of 11.52 years. Anteroposterior and transverse increases of the upper airway were found for both groups. The oropharynx and the most constricted area increased similarly in both groups. CONCLUSIONS: No differences in upper airway changes were observed using protraction anchored on hybrid or conventional hyrax expanders. CLINICAL RELEVANCE: Maxillary protraction anchored on hybrid or conventional hyrax expanders may benefit patients with breathing disorders due to the increase of the upper airway volume and most constricted area. Registration: ClinicalTrials.gov (NCT03712007).

Asunto(s)