RESUMEN
This research presents the obtaining of a biochar (CB) from the use of pomegranate peel (Punica granatum) conditioned with iron and cerium nanoparticles (C-Fe/Ce), as well as its characterization by SEM (Scanning Electronic Microscopy), FTIR (Fourier Transform Infrared Spectrometry), TGA (Thermogravimetric analysis), EDS (Energy Dispersive Spectroscopy), XPS (X-Ray Photoelectron Spectroscopy) and evaluation of the adsorption capacity of ampicillin (AMP) in aqueous phase at 20, 30 and 40 °C. The maximum adsorption capacity for CB was 18.97 mg g-1 and for C-Fe/Ce, 27.61 mg g-1 at pH of 7, observing that with increasing temperature, the sorption capacity decreases in both materials, the experimental data was fitted to various mathematical models and the best fit was the pseudo-second order model for the kinetics, whilst for the adsorption isotherms the best fit was with the Langmuir model, indicating that the adsorption process is carried out in a monolayer on a homogeneous surface, through a chemisorption process. According to the thermodynamic parameters this process is carried out through an exothermic reaction. The results obtained indicate that both materials are suitable for the removal of AMP in the aqueous phase and that they can be reused up to 5 times.
RESUMEN
This work presents the formation of biochar with calcium nanoparticles (NPsCa) in function of pyrolysis time (C10, C30, C60, C120 and C180 min) using the Citrus tangerina peel and their evaluation in the remotion of Aflatoxin B1 (AFB1) in aqueous phase. Firstly, the Citrus tangerina was studied by Thermogravimetric analysis to determine the optimal temperature (TGA), obtaining a result of 600 °C. The biochar (NPsCa) were characterized by Scanning Electronic Microscopy (SEM) and Energy Dispersive Spectroscopy (EDS), as well as surface properties including the identification of functional groups by Fourier Transform Infrared Spectrometry (FTIR), and energetic states through the X-Ray Photoelectron Spectroscopy (XPS). The adsorption studies were carried out on the different materials and later, the experimental data was adjusted to different mathematical models, obtaining the best fit of the kinetic data to the Ho-McKay model, whilst the adsorption isotherms were adjusted to the model of Langmuir, which indicates that the Aflatoxin B1 adsorption process is carried out through a monolayer chemisorption process with maximum sorption capacities (qm) ranging between 15.72 and 63.22 µg g-1 with the 180th minute being the adequate time to obtain the carbon with the best surface properties and the best adsorption capacity. Additionally, it was observed that each material can be reused up to five times in accordance with the results from the reuse cycles.