RESUMEN
This study investigates a compact palladium membrane module (CPMM) for hydrogen purification, assembled by diffusion bonding at a low-temperature (450 °C). This CPMM resulted in hydrogen (H2) flux of 18.3 mL cm-2 min-1 with H2/N2 selectivity of over 1100. The H2 purification test using a 60% H2/40% CO2 mixed gas confirmed that the CPMM can separate H2 with a concentration of more than 99%, with a pressure difference of 5 bar. Moreover, the volume of the diffusion bonded membrane module is decreased by 81.4% than the flame-type membrane module pre-studied in our laboratory.
RESUMEN
For the application of formic acid as a liquid organic hydrogen carrier, development of efficient catalysts for dehydrogenation of formic acid is a challenging topic, and most studies have so far focused on the composition of metals and supports, the size effect of metal nanoparticles, and surface chemistry of supports. Another influential factor is highly desired to overcome the current limitation of heterogeneous catalysis for formic acid decomposition. Here, we first investigated the effect of support pore structure on formic acid decomposition performance at room temperature by using mesoporous silica materials with different pore structures such as KIE-6, MCM-41, and SBA-15, and achieved the excellent catalytic activity (TOF: 593 h-1) by only controlling the pore structure of mesoporous silica supports. In addition, we demonstrated that 3D interconnected pore structure of mesoporous silica supports is more favorable to the mass transfer than 2D cylindrical mesopore structure, and the better mass transfer provides higher catalytic activity in formic acid decomposition. If the pore morphology of catalytic supports such as 3D wormhole or 2D cylinder is identical, large pore size combined with high pore volume is a crucial factor to achieve high catalytic performance.
RESUMEN
The development of easier, cheaper, and more ecofriendly synthetic methods for mesoporous materials remains a challenging topic to commercialize them, and the transformation of waste glycerol, as a biodiesel byproduct, into something useful and salable is one of the pending issues to be resolved. Here we first report that mesoporous silica (KIE-6) and carbon (KIE-7) can be simultaneously synthesized by using cheap and ecofriendly crude-waste-glycerol of biodiesel with or without glycerol purification, and we demonstrated the excellent performance of the mesoporous material as a catalyst support for formic acid decomposition. As a result, Pd-MnOx catalysts supported on NH2-functionalized KIE-6 showed the highest catalytic activity (TOF: 540.6 h(-1)) ever reported for room-temperature formic acid decomposition without additives. Moreover, we conducted life-cycle assessment (LCA) from biomass cultivation through biodiesel production to KIE-6 and KIE-7 preparation, and it was confirmed that CO2 emission during synthesis of KIE-6 and KIE-7 could be reduced by 87.1% and 85.7%, respectively. We believe that our study suggested more ecofriendly and industry-friendly approaches for preparation of mesoporous materials, and utilization of waste glycerol.
RESUMEN
Mesoporous silica and titania supraparticles with controllable pore size, particle size, and macroscopic morphology were readily synthesized by a novel synthetic pathway using meniscus templating on a superhydrophobic surface, which is much simpler than well-known emulsion systems. Moreover, we first report that despite the very large radius of droplet curvature on a millimeter scale, supraparticles kept the round cap morphology due to addition of sucrose as a shape preserver as well as a pore-forming agent. In addition, mesoporous silica and titania supraparticles provided good adsorption performance for Acid Blue 25 and Cr(VI), and were easily separated from the solution by using a scoop net after adsorption tests.