RESUMEN
The occurrence and fate of antibiotic compounds in water can adversely affect human and animal health; hence, the removal of such substrates from soil and water is indispensable. Herein, we described the synthesis method of mesoporous carbon (MPC) via the pyrolysis route from a coordination polymer Fe-based MIL-53 (or MIL-53, shortly). The MPC structure was analyzed by several physical techniques such as SEM, TEM, BET, FT-IR, VSM, and XRD. The response surface methodology (RSM) was applied to find out the effects of initial concentration, MPC dosage, and pH on the removal efficiency of trimethoprim (TMP) and sulfamethoxazole (SMX) antibiotics in water. Under the optimized conditions, the removal efficiencies of TMP and SMX were found to be 87% and 99%, respectively. Moreover, the adsorption kinetic and isotherm studies showed that chemisorption and the monolayer adsorption controlled the adsorption process. The leaching test and recyclability studies indicated that the MPC structure was stable and can be reused for at least four times without any considerable change in the removal efficiency. Plausible adsorption mechanisms were also addressed in this study. Because of high maximum adsorption capacity (85.5 mg/g and 131.6 mg/g for TMP and SMX, respectively) and efficient reusability, MPC is recommended to be a potential adsorbent for TMP and SMX from water media.
Asunto(s)
Sulfonamidas/química , Contaminantes Químicos del Agua/química , Adsorción , Antibacterianos/química , Carbono , Cinética , Estructuras Metalorgánicas , Modelos Químicos , Pirólisis , Espectroscopía Infrarroja por Transformada de Fourier , Sulfametoxazol/química , Trimetoprim , AguaRESUMEN
Herein, a facile strategy to fabricate the novel manganese oxide-imprinted mesoporous carbons (MOPCx, x presents for pyrolysis temperature) was described via the direct pyrolysis of Mn2(BDC)2(DMF)2 (BDCâ¯=â¯1,4-benzenedicarboxylate, DMFâ¯=â¯N,N-dimethylformamide) as a self-sacrificed template at various temperatures (xâ¯=â¯550, 750, and 950⯰C). The characterization results demonstrated the existence of MnO embedded in carbon structures with different morphologies, and enhancing surface areas (249.86-294.67â¯m2/g) compared with their precursor (3.59â¯m2/g). For methylene blue adsorption experiments, the MOPC pyrolyzed at 950⯰C (MOPC950) revealed the best candidate with maximum uptake capacity (124.1â¯mg/g), so far higher than other MOPCx and Mn2(BDC)2(DMF)2 materials. Finally, adsorption mechanisms involving H-bond, and π-π interaction were proposed via the chemisorption between surface functional groups (carboxyl, phenol, lactone, and base).