RESUMEN
The aim of this study was to assess the effect of a newly developed nanocomplex formed of hydroxypropyl-b-cyclodextrin and 1% titanium tetrafluoride (TiF4) after distinct complexation periods (12/72 h) on demineralization of bovine enamel in vitro. Enamel blocks (n=60) were allocated in different groups: Mili-Q water, hydroxypropyl-b-cyclodextrin, 1% TiF4, hydroxypropyl-b-cyclodextrin + 1% TiF4 after 12 h of complexation and hydroxypropyl-b-cyclodextrin + 1% TiF4 after 72 h of complexation. The samples were evaluated by surface microhardness, cross-sectional microhardness and micro-CT. Scanning electron microscopy and energy dispersive X-ray spectrometry (SEM/EDX) were also obtained. Hydroxypropyl-b-cyclodextrin + 1% TiF4 after 12 h complexation resulted in lower percentage of surface microhardness loss compared to Mili-Q water, hydroxypropyl-b-cyclodextrin, 1% TiF4 and hydroxypropyl-b-cyclodextrin + 1% TiF4 after 72 h of complexation group, with a large effect size (from 1.307 to 2.943) and high power (84.9 to 99%). All groups resulted in similar integrated mineral loss (ΔZ) obtained by both internal microhardness and micro-CT techniques. Enamel treated with TiF4 and TiF4 + hydroxypropyl-b-cyclodextrin groups showed a TiO2 glaze-layer, while EDX evaluation identified Ti. The solution containing the inclusion complex of hydroxypropyl-b-cyclodextrin + TiF4 with 12 h of complexation period demonstrated a significant ability to reduce surface demineralization of sound enamel under an artificial cariogenic challenge.
Asunto(s)
Ciclodextrinas , Fluoruros , Animales , Bovinos , Estudios Transversales , Esmalte Dental , TitanioRESUMEN
Abstract The aim of this study was to assess the effect of a newly developed nanocomplex formed of hydroxypropyl-b-cyclodextrin and 1% titanium tetrafluoride (TiF4) after distinct complexation periods (12/72 h) on demineralization of bovine enamel in vitro. Enamel blocks (n=60) were allocated in different groups: Mili-Q water, hydroxypropyl-b-cyclodextrin, 1% TiF4, hydroxypropyl-b-cyclodextrin + 1% TiF4 after 12 h of complexation and hydroxypropyl-b-cyclodextrin + 1% TiF4 after 72 h of complexation. The samples were evaluated by surface microhardness, cross-sectional microhardness and micro-CT. Scanning electron microscopy and energy dispersive X-ray spectrometry (SEM/EDX) were also obtained. Hydroxypropyl-b-cyclodextrin + 1% TiF4 after 12 h complexation resulted in lower percentage of surface microhardness loss compared to Mili-Q water, hydroxypropyl-b-cyclodextrin, 1% TiF4 and hydroxypropyl-b-cyclodextrin + 1% TiF4 after 72 h of complexation group, with a large effect size (from 1.307 to 2.943) and high power (84.9 to 99%). All groups resulted in similar integrated mineral loss (ΔZ) obtained by both internal microhardness and micro-CT techniques. Enamel treated with TiF4 and TiF4 + hydroxypropyl-b-cyclodextrin groups showed a TiO2 glaze-layer, while EDX evaluation identified Ti. The solution containing the inclusion complex of hydroxypropyl-b-cyclodextrin + TiF4 with 12 h of complexation period demonstrated a significant ability to reduce surface demineralization of sound enamel under an artificial cariogenic challenge.
Resumo O objetivo deste estudo foi avaliar o efeito da 1-etil-3- (3-dimetilaminopropil) carbodiimida (EDC) na resistência de união de pinos de fibra de vidro em canais radiculares obturados com diferentes cimentos endodônticos. Setenta e oito pré-molares inferiores foram obturados com três cimentos endodônticos (n=26): Endofill (END), AH Plus (AHP) e Endosequence BC Sealer (EBS). Após o preparo do espaço para pino, dois subgrupos formaram-se conforme a cimentação dos pinos (n=13): com EDC e sem EDC (controle - CON). Os espécimes foram submetidos ao teste pull-out, classificação do modo de falha e avaliação da superfície do canal radicular por microscopia eletrônica de varredura após o deslocamento. Quanto à força de resistência de união, uma diferença estatisticamente significativa ocorreu entre os subgrupos EDC e CON apenas no END (p=0,001). Não foi detectada diferença entre os subgrupos CON (p=0,339). Contudo, no subgrupo EDC, o AHP apresentou maiores valores (END versus AHP: p=0,001; AHP versus EBS: p=0,016). Acerca da classificação dos modos de falha, o escore 1 (≥50% de cimento) foi o mais comumente observado, exceto para END + EDC. Restos de cimentos endodônticos e cimentos resinosos foram encontrados no terço cervical, mas sem diferença estatística (p=0,269), enquanto no terço médio, houve diferença (p=0,004). Em conclusão, o EDC diminui a resistência de união quando associado ao cimento END, sem alterar o modo de falha entre o cimento resinoso e o pino de fibra de vidro. O melhor desempenho foi observado quanto o EDC foi usado com o cimento AHP.
Asunto(s)
Animales , Ciclodextrinas , Fluoruros , Titanio , Bovinos , Estudios Transversales , Esmalte DentalRESUMEN
OBJECTIVES: The aim of this study was to assess the in vitro caries preventive effect of nanocomplexed solutions of hydroxypropyl-ß-cyclodextrin and γ-cyclodextrin associated with titanium tetrafluoride (TiF4) after different complexation times (12 or 72 h). MATERIALS AND METHODS: Enamel blocks were randomly distributed in 9 groups (n = 11): negative control, hydroxypropyl-ß-cyclodextrin, γ-cyclodextrin, TiF4, hydroxypropyl-ß-cyclodextrin:TiF4 12 h, hydroxypropyl-ß-cyclodextrin:TiF4 72 h, γ-cyclodextrin:TiF4 12 h, γ-cyclodextrin:TiF4 72 h, and NaF (positive control). The solutions were applied for 1 min and the blocks were exposed to a biofilm model. Nanocompounds were characterized by differential scanning calorimetry and X-ray powder diffraction. The percentage of surface microhardness loss (%SML), mineral density changes (ΔZ), lesion depth, surface morphology (scanning electron microscopy-SEM), and chemical characterization (energy-dispersive spectroscopy-EDS) were assessed. RESULTS: No oxidation was observed, and the formation of the nanocomplexes was evidenced by changes in the melting point compared to pure cyclodextrins and the loss of crystallinity of the materials. Hydroxypropyl-ß-cyclodextrin:TiF4 72 h resulted in lower %SML than negative control, hydroxypropyl-ß-cyclodextrin, γ-cyclodextrin, and TiF4 (p < 0.05). NaF differed from all groups (p < 0.05), except for hydroxypropyl-ß-cyclodextrin:TiF4 72 h (p = 0.83). ΔZ of hydroxypropyl-ß-cyclodextrin:TiF4 72 h was higher than negative control, hydroxypropyl-ß-cyclodextrin, γ-cyclodextrin, γ-cyclodextrin:TiF4 1 2 h, γ-cyclodextrin:TiF4 72 h, and NaF (p < 0.05) and similar to TiF4 and hydroxypropyl-ß-cyclodextrin:TiF4 12 h (p > 0.05). SEM/EDS detected Ti in the blocks subjected to TiF4-products. CONCLUSION: The hydroxypropyl-ß-cyclodextrin:TiF4 72 h solution showed caries preventive effect on the surface and subsurface of the enamel. CLINICAL RELEVANCE: A hydroxypropyl-ß-cyclodextrin nanosystem, in association with TiF4 after 72 h of complexation, may be a promising agent for the prevention of enamel demineralization.