RESUMEN
Although TiC nanostructures show promise as non-noble-metal-based electrocatalysts, improved synthesis methods are required. Herein, single-crystalline TiC nanocubes with exposed {100} facets are grown by combusting TiO2 + kMg + C reactive mixtures (k = 4-6.5 mol) in argon. During the synthesis, the temperature increases to 1200-1550 °C and excess Mg (2-4.5 mol) forms a liquid pool. The obtained TiC nanocubes have edge lengths of 50-300 nm and surface areas of 12.2-30.05 m2 g-1 . Insights into the TiC nanocube formation mechanism are obtained using density functional theory modeling of the surface energies of TiC nanocrystals and shape visualization using the Wulff construction method. During TiC nucleation and growth within the Mg melt, liquid Mg likely acts as a capping agent for {111} facets, thus promoting the formation of {100} facets. The TiC nanocubes show high electrocatalytic activity for the hydrogen evolution reaction, with a lower overpotential (0.298 V at 10 mA cm-2 ) than other TiC nanostructures (0.400-0.815 V).
RESUMEN
This paper demonstrates for the first time the fabrication of Zr-Cu alloy ingots from a Hf- free ZrO2 precursor in a molten CaCl2 medium to recover nuclear-grade Zr. The reduction of ZrO2 in the presence of CaO was accelerated by the formation of Ca metal in the intermediate stage of the process. Tests conducted with various amounts of ZrO2 indicate that the ZrO2 was reduced to the metallic form at low potentials applied at the cathode, and the main part of the zirconium was converted to a CuZr alloy with a different composition. The maximum oxygen content values in the CuZr alloy and Zr samples upon using liquid Cu were less than 300 and 891 ppm, respectively. However, Al contamination was observed in the CuZr during the electroreduction process. In order to solve the Al contamination problem, the fabrication process of CuZr was performed using the metallothermic reduction process, and the produced CuZr was used for electrorefining. The CuZr alloy was further purified by a molten salt electrorefining process to recover pure nuclear-grade Zr in a LiF-Ba2ZrF8-based molten salt, the latter of which was fabricated from a waste pickling acid of a Zr clad tube. After the electrorefining process, the recovered Zr metal was fabricated into nuclear-grade Zr buttons through arc melting following a salt distillation process. The results suggest that the removal of oxygen from the reduction product is a key reason for the use of a liquid CaCu reduction agent.
RESUMEN
We developed a highly effective and self-sustaining route for synthesizing Sr(2)Si(5)N(8):Eu(2+) red-emitting phosphor particles for use in light emitting diodes (LEDs). The phosphors thus synthesized showed excellent emission characteristics under a blue excitation wavelength of 450 nm, had a uniform particle size distribution, and showed high performance in LED packages.