RESUMEN

BACKGROUND: Gram-negative bacteria resistant to carbapenems are also known as critical antimicrobial resistant organisms. Their emergence at Colonial War Memorial Hospital (CWMH), the largest hospital in Fiji, is a major clinical concern. This study was conducted to determine the knowledge, attitudes, and readiness of healthcare workers (HCW) at CWMH regarding management of patients with infections caused by critical antimicrobial resistant organisms. METHODS: A questionnaire was designed using a Likert scale to assess knowledge, attitudes, and readiness. Two cross-sectional studies were conducted, before and after the implementation of targeted educational activities which were informed by the pre-intervention study findings. RESULTS: A total of 393 and 420 HCW participated in the pre- and post-intervention studies, respectively. The majority of respondents were female (77.3%) and 18-34 years of age (67%). HCW professional roles included nurses (56.3%), doctors (31.6%), and laboratory personnel (12.2%). In the post-intervention study, significantly more HCW reported having received infection prevention and control (IPC) and antimicrobial resistance education and training (26.8% in pre to 45.5% in post intervention, p < 0.001). The majority of nurses and doctors (> 85% to ≥ 95%) were aware of how AMR organisms spread in healthcare settings and knew the IPC measures to prevent transmission of AMR infections including hand hygiene, standard and transmission-based precautions. Attitudes towards AMR were positive, with 84.2% pre intervention and 84.8% of HCW post intervention expressing their willingness to change their work environment to assist with AMR prevention. Perceived readiness to address the problem showed mixed results. Improvements in laboratory AMR surveillance data availability were noted (29.4-52.4%, p < 0001). Modest improvement in the hospital's capacity for outbreak response (44-51.9%, p = 0.01), and treatment of AMR infections (38.9-44.4%, p = 0.01) was reported. CONCLUSIONS: Our data revealed high levels of staff awareness and knowledge about AMR and IPC. However, readiness for outbreak response and treatment of critical AMR infections requires more attention. Improving AMR prevention and containment in CWMH will likely require sustained and multisectoral interventions with strong administrative commitment.

Asunto(s)

Conocimientos, Actitudes y Práctica en Salud , Personal de Salud , Humanos , Femenino , Masculino , Fiji , Adulto , Estudios Transversales , Personal de Salud/psicología , Adulto Joven , Encuestas y Cuestionarios , Adolescente , Control de Infecciones/métodos , Persona de Mediana Edad , Infección Hospitalaria/microbiología , Hospitales Militares , Actitud del Personal de Salud , Bacterias Gramnegativas/efectos de los fármacos , Infecciones por Bacterias Gramnegativas

RESUMEN

The increasing utilization of zinc oxide nanoparticles (ZnO-NPs) in many consumer products is of concern due to their eventual release into the natural environment and induction of potentially adverse impacts. The behaviour and environmental impacts of ZnO-NPs could be altered through their interactions with environmentally coexisting substances. This study investigated the changes in the behaviour of ZnO-NPs in the presence of coexisting organic pollutants (such as perfluorooctanoic acid [PFOA]), natural organic substances (i.e., humic acid [HA]), and electrolytes (i.e., NaCl and CaCl2) in simulated waters. The size, shape, purity, crystallinity, and surface charge of the ZnO-NPs in simulated water after different interaction intervals (such as 1 day, 1 week, 2 weeks, and 3 weeks) at a controlled pH of 7 were examined using various characterization techniques. The results indicated alterations in the size (such as 162.4 nm, 1 day interaction to >10 µm, 3 weeks interaction) and zeta potential (such as -47.2 mV, 1 day interaction to -0.2 mV, 3 weeks interaction) of the ZnO-NPs alone and when PFOA, electrolytes, and HA were present in the suspension. Different influences on the size and surface charge of the nanoparticles were observed for fixed concentrations (5 mM) of the different electrolytes. The presence of HA-dispersed ZnO-NPs affected the zeta potential. Such dispersal effects were also observed in the presence of both PFOA and salts due to their large aliphatic carbon content and complex structure. Cation bridging effects, hydrophobic interactions, hydrogen bonding, electrostatic interactions, and van der Waals forces could be potential interaction forces responsible for the adsorption of PFOA. The presence of organic pollutants (PFOA) and natural organic substances (HA) can transform the surface characteristics and fate of ZnO-NPs in natural and sea waters.

RESUMEN

Heterogeneous iron-based catalysts have drawn increasing attention in the advanced oxidation of persulfates due to their abundance in nature, the lack of secondary pollution to the environment, and their low cost over the last a few years. In this paper, the latest progress in the research on the activation of persulfate by heterogeneous iron-based catalysts is reviewed from two aspects, in terms of synthesized catalysts (Fe0, Fe2O3, Fe3O4, FeOOH) and natural iron ore catalysts (pyrite, magnetite, hematite, siderite, goethite, ferrohydrite, ilmenite and lepidocrocite) focusing on efforts made to improve the performance of catalysts. The advantages and disadvantages of the synthesized catalysts and natural iron ore were summarized. Particular interests were paid to the activation mechanisms in the catalyst/PS/pollutant system for removal of organic pollutants. Future research challenges in the context of field application were also discussed.

Asunto(s)

Hierro , Sulfatos , Contaminantes Químicos del Agua , Catálisis , Hierro/química , Sulfatos/química , Contaminantes Químicos del Agua/química , Oxidación-Reducción , Eliminación de Residuos Líquidos/métodos

RESUMEN

Paper cups have been widely used such as in the fast-food industry for drinking and are generally made of disposable material. To make the paper cup waterproof and prevent leakage, a thin layer of plastic such as polylactic acid (PLA) is commonly coated onto the inner wall surface. This plastic layer can potentially release debris as microplastics, particularly when the cup is wrinkled/crumpled to break and peel off the coating layer, which is tested herein. Using scanning electron microscope (SEM), the broken coating layer can be clearly observed. We then identify the coating material as plastic using mass and Raman spectra. We further employ Raman imaging to identify the released and fallen down debris as microplastics. We cross-check Raman image with SEM image to benefit each other and increase the analysis certainty, because Raman imaging can identify plastic via hyper spectrum to increase the signal-to-noise ratio, while SEM can visualise plastic with a high resolution down to micro-/nano- size. We then employ particle analysis algorithm to estimate the release amount, at approximate 180 microplastic/wrinkle, or micro-bioplastic if considering the main material of PLA as a bioplastic. Overall, we should not wrinkle the paper cup to avoid the potential release of microplastics or micro-bioplastics particularly before and during the drinking process, and the characterisation in this report might be helpful for further research on microplastics.

RESUMEN

For a plastic syringe, a stopper at the end of plunger is usually made of polydimethylsiloxane (PDMS, and co-ingredients). To reduce friction and prevent leakage between the stopper and barrel, short chain polymer of liquid PDMS is also used as lubricant. Consequently, an injection process can release solid PDMS debris from the stopper and barrel, and liquid PDMS droplets from the lubricant, both of which are confirmed herein as solid and liquid micro(nano)plastics. From molecular spectrum perspective to directly visualise those micro(nano)plastics, Raman imaging was employed to analyse hundreds-to-thousands of spectra (hyper spectrum or hyperspectral matrix) and significantly enhance signal-to-noise ratio. From morphology perspective to provide high resolution of image, scanning electron microscopy (SEM) was engaged to cross-check with Raman images and increase assignment / quantification certainty. The weak Raman imaging signal of nanoplastics was extracted using image deconvolution algorithm to remove the background noise and average the signal variation. To increase the result's representativeness and avoid quantification bias, multiple syringes were tested and multiple areas were randomly scanned toward statistical results. It was estimated that thousands of microplastics and millions of nanoplastics of solid/liquid PDMS might be injected when using a plastic syringe of 1 mL. Overall, Raman imaging (along with algorithm and SEM) can be helpful for further research on micro(nano)plastics, and it should be cautious to use plastic syringe due to the increasing concern on the emerging contamination of not only solid but also liquid micro(nano)plastics.

RESUMEN

An ultrasound (US)/biochar (BC)/ferrate (Fe (VI)) system was firstly proposed to enhance perfluorooctanoic acid (PFOA) defluorination. It achieved 93 % defluorination optimally, higher than the sum of 77 % (28 % and 49 % for US/BC and US/Fe (VI) respectively), implying synergistic effect. Besides, the mechanism study confirmed that, this system can not only increase the specific surface area of BC and the generation of reactive oxidant species (ROS), enriching the active sites and forming new oxygen-containing functional groups, but also promote the formation of intermediate iron species. The PFOA degradation in the US/BC/Fe (VI) was probably an adsorption-degradation process, both ROS and electron transfer promoted the defluorination. Additionally, its sustainability was also demonstrated with 14 % reduced defluorination percentage after five cycles of BC. Overall, the synergistic effect of the US/BC/Fe (VI) and its enhancing mechanism for PFOA defluorination were clarified firstly, which contributes to the development of biochar for assisting polyfluoroalkyl substances degradation.

Asunto(s)

Caprilatos , Carbón Orgánico , Fluorocarburos , Hierro , Fluorocarburos/química , Caprilatos/química , Carbón Orgánico/química , Hierro/química , Halogenación , Ondas Ultrasónicas , Contaminantes Químicos del Agua , Adsorción , Especies Reactivas de Oxígeno/metabolismo

RESUMEN

While microplastics and nanoplastics are emerging as a big environmental concern, their characterization is still a challenge, particularly for identification and simultaneous quantification analysis where imaging via a hyper spectrum is generally needed. In the past few years, Raman imaging has been greatly advanced, but the analysis protocol is complicated and not yet standardized because imaging analysis is different from traditional analysis. Herein we provide a step-by-step demonstration of how to employ confocal Raman techniques to image microplastics and nanoplastics.

RESUMEN

The ubiquitousness of per- and polyfluoroalkyl substances (PFAS) is a big concern and PFAS remediation is urgently needed such as via degradation. While previous studies have explored ultrasonic degradation of PFAS, work evaluating the operational parameters is rare, especially concerning real wastes such as aqueous film-forming foam (AFFF) and foam fractionate (FF). This study investigates the key operational parameters affecting the degradation efficiency of PFAS, encompassing ultrasonication frequency (580-1144 kHz), power intensity (125-187.5 W), initial concentration (0.08-40 ppm), treatment duration (0.5-3 h), sample volume (100-500 mL), and PFAS structure (perfluorooctanoic acid or PFOA; perfluorooctane sulfonate or PFOS; 6:2 fluorotelomer sulfonate or 6:2 FTS). The defluorination kinetics is different from the removal/degradation kinetics due to the generation of degradation intermediates, suggesting the complex degradation mechanism, which should be evaluated to close the mass balance effectively. Notably, the optimised ultrasonic system achieves ∼125%/∼115% defluorination in AFFF/FF example wastes (compared to ∼65%/∼97% removal) despite their complex composition and the involvement of total oxidizable precursor (TOP) assay. In the meantime, a few new PFAS are detected in the post-treatments, including perfluorohexane sulfonic acid (PFHxS) and 10:2 fluorotelomer sulfonate (10:2 FTS) in the AFFF, and perfluorooctane sulfonamide (FOSA) and 8:2 fluorotelomer sulfonate (8:2 FTS) in the FF, again suggesting the complex degradation mechanism. Overall, ultrasonication is effective to degrade PFAS real example wastes, advancing its potential for scale-up applications.

Asunto(s)

Ácidos Alcanesulfónicos , Caprilatos , Fluorocarburos , Contaminantes Químicos del Agua , Fluorocarburos/química , Ácidos Alcanesulfónicos/química , Contaminantes Químicos del Agua/química , Contaminantes Químicos del Agua/análisis , Caprilatos/química , Cinética , Ondas Ultrasónicas , Ultrasonido , Restauración y Remediación Ambiental/métodos

RESUMEN

Australia's metalliferous abandoned mine sites (MAMSs), pose tangible threats to the environment and human health. To address these concerns, our study utilised state-of-the-art handheld XRF technology to conduct a real-time assessment of the Mole River arsenic mine site. The data revealed notably elevated levels of arsenic and manganese, with the southeast corner of the site identified as a contaminant hotspot. We used a tiered risk assessment approach to compare the detected contaminant concentrations to the Australian health investigation levels (tier 1). This led us to a broader examination of erosion vulnerabilities and the potential migration of contaminants (tier 2). Further, a hydrological assessment (tier 3) identified significant erosion in southern regions, indicating the potential for contaminants to be transported off-site through surface water runoff to Sam's Creek and Mole River. The proximity of a reservoir to these runoff pathways brought forth additional challenges, especially during heavy rainfall events. Subsequent laboratory analysis of water samples reinforced our findings, as they confirmed heightened arsenic concentrations in Mole River downstream, accentuating the potential risks to ecosystems and human health. By integrating the XRF contour map and erosion assessment with the RUSLE model, valuable insights are gained into critical hotspots with high contamination and erosion potential. By directing rehabilitation efforts towards critical hotspots, resources can be allocated more efficiently and cost-effectively.

RESUMEN

The deep removal of organic pollutants is challenging for coagulation technology in drinking water and wastewater treatment plants to satisfy the rising water standards. Iron (III) chloride (FeCl3) is a popular inorganic coagulant; although it has good performance in removing the turbidity (TB) in water at an alkaline medium, it cannot remove dissolved pollutants and natural organic matter such as humic acid water solution. Additionally, its hygroscopic nature complicates determining the optimal dosage for effective coagulation. Biochar (BC), a popular adsorbent with abundant functional groups, porous structure, and relatively high surface area, can adsorb adsorbates from water matrices. Therefore, combining BC with FeCl3 presents a potential solution to address the challenges associated with iron chloride. Consequently, this study focused on preparing and characterizing a novel biochar/ferric chloride-based coagulant (BC-FeCl3) for efficient removal of turbidity (TB) and natural organic matter, specifically humic acid (HA), from synthetic wastewater. The potential solution for the disposal of produced sludge was achieved by its recovering and recycling, then used in adsorption of HA from aqueous solution. The novel coagulant presented high TB and HA removal within 10 min of settling period at pH solution of 7.5. Furthermore, the recovered sludge presented a good performance in the adsorption of HA from aqueous solution. Adsorption isotherm and kinetics studies revealed that the Pseudo-second-order model best described kinetic adsorption, while the Freundlich model dominated the adsorption isotherm.

Asunto(s)

Carbón Orgánico , Cloruros , Compuestos Férricos , Sustancias Húmicas , Aguas Residuales , Sustancias Húmicas/análisis , Carbón Orgánico/química , Adsorción , Cloruros/química , Compuestos Férricos/química , Aguas Residuales/química , Contaminantes Químicos del Agua/química , Contaminantes Químicos del Agua/análisis , Aguas del Alcantarillado/química , Eliminación de Residuos Líquidos/métodos , Purificación del Agua/métodos

RESUMEN

The concern over plastic contamination has led to bans on plastic shopping bags, often replaced by paper ones. However, logos painted or printed on paper bags may still contain plastics, as investigated herein. In some logos, for example, white pigment of titanium dioxide (TiO2) nanoparticles are bound with plastic binder onto the cellulose surface of the paper. This hybrid of plastic and nanoparticle is examined using scanning electron microscope (SEM) to characterise morphology physically, and Raman imaging to identify and visualise them chemically. Raman imaging scans the sample to separate images and identify not only plastic but also the co-formulated pigment. The scan generates a hyperspectral matrix containing hundreds to thousands of spectra, and subsequent analysis can enhance the signal-to-noise ratio. Decoding the hyperspectral matrix using chemometrics like principal component analysis (PCA) can effectively map plastic and pigment separately with increased certainty. The image can be further refined through 3-dimensional surface fitting for deconvolution, providing direct visualisation of the plastic-nanoparticle hybrid at a density of approximately 7.3 million particles per square millimetre. Overall, caution should be exercised when using paper bags, as they may not be entirely free of plastics. Raman imaging proves to be an effective method for identifying and visualising complex components, including plastics and nanoparticles. ENVIRONMENTAL IMPLICATION: The concern over plastic contamination has led to bans on plastic shopping bags, replaced by paper alternatives. However, some logos on paper bags may still contain plastics, which is investigated to confirm the presence of plastic-nanoparticle hybrid using SEM and Raman imaging. By employing decoding algorithms such as PCA to separately map plastic and pigment, and utilising 3D surface fitting to deconvolute the image, the hybrid plastic-nanoparticle is estimated at a density of approximately 7.3 million particles per square millimetre. It's important to exercise caution and not assume these items are plastic-free. This aspect of plastics may have been overlooked as another potential source of contamination.

RESUMEN

Microplastics and nanoplastics have become noteworthy contaminants, affecting not only outdoor ecosystems but also making a notable impact within indoor environments. The release of microplastics and nanoplastics from commonly used plastic items remains a concern, and the characterisation of these contaminants is still challenging. This study focused on evaluating the microplastics and nanoplastics produced from plastic building bricks. Using Raman spectroscopy and correlation analysis, the plastic material used to manufacture building blocks was determined to be either acrylonitrile butadiene styrene (correlation value of 0.77) or polycarbonate (correlation value of 0.96). A principal component analysis (PCA) algorithm was optimised for improved detection of the debris particles released. Some challenges in microplastic analysis, such as the interference from the colourants in the building block materials, was explored and discussed. Combining Raman results with scanning electron microscopy - energy-dispersive X-ray spectroscopy, we found the scratches on the building blocks to be a significant source of contamination, estimated several thousand microplastics and several hundred thousand nanoplastics were generated per mm2 following simulated play activities. The potential exposure to microplastics and nanoplastics during play poses risks associated with the ingestion and inhalation of these minute plastic particles.

RESUMEN

OBJECTIVES: We analysed 4 y of laboratory data to characterise the species and determine the antimicrobial susceptibility profiles of enterococci as human pathogens in Fiji. The study also investigated the molecular epidemiology amongst the subset of vancomycin-resistant enterococci (VRE). METHODS: This retrospective study reviewed bacteriological data from Colonial War Memorial Hospital (CWMH) and other healthcare facilities in the Central and Eastern divisions of Fiji. Phenotypic, antimicrobial susceptibility and vanA and vanB PCR testing were performed using locally approved protocols. The first clinical isolates per patient with antimicrobial susceptibility testing results in a single year were included in the analysis. Data was analysed using WHONET software and Microsoft Excel. RESULTS: A total of 1817 enterococcal isolates were reported, 1415 from CWMH and 402 from other healthcare facilities. The majority of isolates, 75% (n = 1362) were reported as undifferentiated Enterococcus spp., 17.8% (n = 324) were specifically identified as Enterococcus faecalis and 6.7% (n = 122) as E. faecium. Overall, 10% of the enterococci isolates were from blood cultures. Among isolates from CWMH, <15% of E. faecium were susceptible to ampicillin, and 17.2% were vancomycin resistant. Overall, 874 enterococcal isolates (including the undifferentiated species) were tested against vancomycin, of which 4.8% (n = 42) were resistance. All of the VRE isolates tested (n = 15) expressed vanA genes. CONCLUSIONS: This study demonstrates the clinical importance of VRE, particularly van A E. faecium in the national referral hospital in Fiji. Enhanced phenotypic and molecular surveillance data are needed to better understand enterococci epidemiology and help guide specific infection prevention and control measures and antibiotic prescribing guidelines.

Asunto(s)

Antibacterianos , Proteínas Bacterianas , Enterococcus , Infecciones por Bacterias Grampositivas , Pruebas de Sensibilidad Microbiana , Centros de Atención Terciaria , Humanos , Fiji/epidemiología , Centros de Atención Terciaria/estadística & datos numéricos , Estudios Retrospectivos , Infecciones por Bacterias Grampositivas/epidemiología , Infecciones por Bacterias Grampositivas/microbiología , Antibacterianos/farmacología , Proteínas Bacterianas/genética , Enterococcus/efectos de los fármacos , Enterococcus/genética , Enterococcus/aislamiento & purificación , Enterococcus/clasificación , Atención Primaria de Salud , Enterococos Resistentes a la Vancomicina/genética , Enterococos Resistentes a la Vancomicina/aislamiento & purificación , Enterococos Resistentes a la Vancomicina/efectos de los fármacos , Ligasas de Carbono-Oxígeno/genética , Enterococcus faecalis/genética , Enterococcus faecalis/efectos de los fármacos , Enterococcus faecalis/aislamiento & purificación , Epidemiología Molecular , Enterococcus faecium/genética , Enterococcus faecium/efectos de los fármacos , Enterococcus faecium/aislamiento & purificación

Asunto(s)

Aprendizaje Automático , Suelo , Monitoreo del Ambiente/métodos , Suelo/química , Análisis Espectral/métodos

RESUMEN

BACKGROUND: This study investigated per- and polyfluoroalkyl substances (PFASs) in 53 fruit and vegetable samples collected from a local wholesale and retail market in Sydney and a local supermarket in Newcastle. As there is limited information about PFAS levels in vegetables on the market, this study aimed to fill this gap and assess potential risks for humans through consumption of these vegetables. METHODS: QuEChERS extraction - a solid-phase extraction method, a portmanteau word formed from 'quick, easy, cheap, effective, rugged and safe' - followed by enhanced matrix removal-lipid cleaning and liquid chromatography-tandem mass spectrometry analysis were used to detect 30 PFASs in vegetables. RESULTS: PFOA was detected in 7 out of the 53 samples, with concentrations of 0.038-1.996 ng g-1 fresh weight; PFOS was detected in 2 samples only, with concentrations ranging from 0.132 to 0.911 ng g-1 fresh weight. PFHxS was not detected in any sample in this study. PFOA and PFOS concentrations measured in vegetables in this study constituted daily intake of 2.03 ng kg-1 body weight (BW) and 1.98 ng kg-1 BW, respectively, according to recommended daily vegetable intake and BW data from the Australian Bureau of Statistics. The most sensitive population group is girls of 4-8 years of age. These estimated exposure levels represent up to 1.3% of the tolerable daily intake for PFOA (160 ng kg-1 BW) and 9.9% for PFOS (20 ng kg-1 BW) according to Food Standards Australia New Zealand. Consumption of the vegetables from the study locations poses a marginal risk to human health. © 2024 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Asunto(s)

Fluorocarburos , Contaminación de Alimentos , Verduras , Verduras/química , Fluorocarburos/análisis , Contaminación de Alimentos/análisis , Humanos , Australia , Extracción en Fase Sólida , Espectrometría de Masas en Tándem , Frutas/química , Ácidos Alcanesulfónicos/análisis , Cromatografía Liquida

RESUMEN

Weed management is an important aspect of crop production, as weeds cause significant losses in terms of yield and quality. Various approaches to weed management are commonly practiced by crop growers. Due to limitations in other control methods, farmers often choose herbicides as a cost-effective, rapid and highly efficient weed control strategy. Although herbicides are highly effective on most weeds, they are not a complete solution for weed management because of the genetic diversity and evolving flexibility of weed communities. The excessive and indiscriminate use of herbicides and their dominance in weed control have triggered the rapid generation of herbicide-resistant weed species. Moreover, environmental losses of active ingredients in the herbicides cause serious damage to the environment and pose a serious threat to living organisms. Scientific advances have enabled nanotechnology to emerge as an innovation with real potential in modern agriculture, adding a new dimension in the preparation of controlled release formulations (CRF) of herbicides. Here the required amount of active ingredients is released over longer periods of time to obtain the desired biological efficacy whilst reducing the harmful effects of these chemicals. Various organic and inorganic carrier materials have been utilised in CRF and researchers have a wide range of options for the synthesis of eco-friendly carrier materials, especially those with less or no toxicity to living organisms. This manuscript addresses the history, progress, and consequences of herbicide application, and discusses potential ways to reduce eco-toxicity due to herbicide application, along with directions for future research areas using the benefits of nanotechnology.

RESUMEN

In the rapidly evolving domain of vapor intrusion (VI) assessments, traditional methodologies encompass detailed groundwater and soil vapor sampling coupled with comprehensive laboratory measurements. These models, blending empirical data, theoretical equations, and site-specific parameters, evaluate VI risks by considering a spectrum of influential factors, from volatile organic compounds (VOC) concentrations in groundwater to nuanced soil attributes. However, the challenge of variability, influenced by dynamic ambient conditions and intricate soil properties, remains. Our study presents an advanced on-site gas sensing station geared towards real-time VOC flux monitoring, enriched with an array of ambient sensors, and spearheaded by the reliable PID sensor for VOC detection. Integrating this dynamic system with machine learning, we developed predictive models, notably the random forest regression, which boasts an R-squared value exceeding 79 % and mean relative error near 0.25, affirming its capability to predict trichloroethylene (TCE) concentrations in soil vapor accurately. By synergizing real-time monitoring and predictive insights, our methodology refines VI risk assessments, equipping communities with proactive, informed decision-making tools and bolstering environmental safety. Implementing these predictive models can simplify monitoring for residents, reducing dependence on specialized systems. Once proven effective, there's potential to repurpose monitoring stations to other VI-prone regions, expanding their reach and benefit. The developed model can leverage weather forecasting data to predict and provide alerts for future VOC events.

RESUMEN

Background: There is a paucity of data on antimicrobial resistance in Fiji. The aim of this study was to determine the antimicrobial susceptibility profile of bacterial isolates from clinical samples at Colonial War Memorial Hospital in Fiji. Methods: This retrospective study reviewed four-year of data from January 1, 2019, through December 31, 2022. Laboratory testing was carried out using locally approved protocols. Selective antimicrobial susceptibility testing was performed whereby only isolates resistant to first line antimicrobials were tested against second line antimicrobials. Only the first isolate of a given species per patient in a single year were included in the analysis. WHONET software and Microsoft Excel were used for analysis. Findings: A total of 29,222 bacterial isolates were included, 62% (n = 18,084) were Gram-negative bacteria. K. pneumoniae was the most common (n = 5363), followed by E. coli (n = 4321). Extended spectrum beta lactamase (ESBL) production increased from 30% in 2019 to 43% in 2022 amongst K. pneumoniae, and 10%-23% in E coli. There were 733 carbapenem-resistant isolates identified from clinical samples, 61% (n = 445) were A. baumannii, 15% (n = 110) E. coli and 14% (n = 101) P. aeruginosa. Amongst the E. coli isolates tested, susceptibility to meropenem declined from 99% (272/274) in 2019 to 79% (255/325) in 2022. The rate of methicillin resistance amongst Staphylococcus aureus was steady, remaining between 11% and 13%. Interpretation: This study demonstrated a high rate of MDR amongst Gram-negative bacteria, especially ESBL producing K. pneumoniae and E. coli and carbapenem-resistant A. baumannii. The emergence and rapid spread of carbapenemase producing E. coli in Fiji's largest hospital is of particular concern. There is an urgent need to allocate resources to improve existing capacity and to develop effective multimodal strategies to detect, manage and control the spread of MDR organisms. Funding: This study was supported by the Medical Research Future Fund through the Australian government (grant number APP 1200970).

RESUMEN

Microplastics (Mps) have emerged as a pervasive environmental concern, with their presence detected not only in freshwater ecosystems but also in drinking and bottled water sources. While extensive research has centered on understanding the origins, migration patterns, detection techniques, and ecotoxicological impacts of these contaminants, there remains a notable research gap about the strategies for Mps removal. This study reviews existing literature on chemical approaches for mitigating microplastic contamination within wastewater systems, focusing on coagulation precipitation, electrocoagulation, and advanced oxidation methods. Each approach is systematically explored, encompassing their respective mechanisms and operational dynamics. Furthermore, the comparative analysis of these three techniques elucidates their strengths and limitations in the context of MPs removal. By shedding light on the intricate mechanisms underlying these removal methods, this review contributes to the theoretical foundation of microplastic elimination from wastewater and identifies future research trajectories and potential challenges.

Asunto(s)

Microplásticos , Aguas Residuales , Contaminantes Químicos del Agua , Aguas Residuales/química , Aguas Residuales/análisis , Microplásticos/análisis , Contaminantes Químicos del Agua/análisis , Purificación del Agua/métodos , Eliminación de Residuos Líquidos/métodos

RESUMEN

Controlled release formulation (CRF) of herbicide is an effective weed management technique with less eco-toxicity than other available commercial formulations. To maximise the effectiveness of CRFs however, it is crucial to understand the herbicide-releasing behaviour at play, which predominately depends on the interaction mechanisms between active ingredients and carrier materials during adsorption. In this study, we investigated and modelled the adsorption characteristics of model herbicide 2,4-D onto two organo-montmorillonites (octadecylamine- and aminopropyltriethoxysilane-modified) to synthesise polymer-based CRFs. Herbicide-releasing behaviour of the synthesised CRF microbeads was then analysed under various experimental conditions, and weed control efficacy determined under glasshouse conditions. Results revealed that adsorption of 2,4-D onto both organo-montmorillonites follows the pseudo-second-order kinetics model and is predominately controlled by the chemisorption process. However, multi-step mechanisms were detected in the adsorption on both organoclays, hence intra-particle diffusion is not the sole rate-limiting step for the adsorption process. Both organoclays followed the Elovich model, suggesting they have energetically heterogeneous surfaces. Herbicide-releasing behaviours of synthesised beads were investigated at various pH temperatures and ionic strengths under laboratory and glasshouse conditions. Furthermore, weed control efficacy of synthesised beads were investigated using pot studies under glasshouse condition. Desorption studies revealed that both synthesised microbeads have slow releasing behaviour at a wide range of pHs (5-9), temperatures (25-45 °C), and ionic strengths. The results also revealed that synthesised microbeads have excellent weed control efficacy on different broad-leaf weed species under glasshouse conditions.

Asunto(s)

Herbicidas , Herbicidas/farmacología , Control de Malezas/métodos , Preparaciones de Acción Retardada , Bentonita , Ácido 2,4-Diclorofenoxiacético , Resistencia a los Herbicidas , Malezas