RESUMEN
Environmental concerns and climate protection are gaining increasing emphasis nowadays. A growing number of industries and scientific fields are involved in this trend. Sustainable electronics is an emerging research strand. Environmentally friendly and biodegradable or biobased raw materials can be used for the development of green flexible electronic devices, which may serve to reduce the pollution generated by plastics and electronics waste. In this work, we present cytocompatible, electrically conductive structures of nanocarbon water-soluble composites based on starch films. To accomplish this goal, potato starch-based films with glycerol as a plasticiser were developed along with a water-soluble vehicle for nanocarbon-based electroconductive pastes specifically dedicated to screen printing technology. Films were characterized by optical microscopy, scanning electron microscopy (SEM) mechanical properties and surface free energy.
RESUMEN
Starch-based films are a valuable alternative to plastic materials that are based on fossil and petrochemical raw resources. In this study, corn and potato starch films with 50% glycerol as a plasticizer were developed, and the properties of films were confirmed by mechanical properties, surface free energy, surface roughness, and, finally, color and gloss analyses. Next, the films were overprinted using ink-jet printing with quick response (QR) codes, text, and pictograms. Finally, the print quality of the obtained prints was determined by optical density, color parameters, and the visual evaluation of prints. In general, corn films exhibit lower values of mechanical parameters (tensile strength, elongation at break, and Young Modulus) and water transition rate (11.1 mg·cm-2·h-1) than potato starch film (12.2 mg·cm-2·h-1), and water solubility is 18.7 ± 1.4 and 20.3 ± 1.2% for corn and potato film, respectively. The results obtained for print quality on starch-based films were very promising. The overprinted QR codes were quickly readable by a smartphone. The sharpness and the quality of the lettering are worse on potato film. At the same time, higher optical densities were measured on potato starch films. The results of this study show the strong potential of using starch films as a modern printing substrate.