RESUMEN

This article discusses a focused study on visualizing the flow patterns in a two-phase pulsating heat pipe (PHP) using Fe3O4/water as the working fluid at 3 V/V% concentration. The research also aims to meticulously examine phase change phenomena in the heating section, particularly focusing on bubble formation and expansion processes. A high-speed video camera was utilized to capture dynamic insights into the behavior of the Fe3O4/water mixture. Based on the findings, a straightforward model was developed to explain bubble generation and growth in the mixture, serving as a useful reference for future PHP designs and optimizations. Visual observations also noted the stable nature of the Fe3O4/water nanofluid over a 4-day period, confirming its consistency throughout the experiments. Moreover, the impact of heat load variation on the evaporator section was assessed using controlled heat inputs ranging from 10 to 80 W. Observations on the arrangement of slugs and plugs at a 50% filling ratio revealed interesting self-adjusting flow patterns in response to increasing heat inputs, providing valuable insights into PHP operational dynamics. Notably, the oscillatory flow behavior of Fe3O4/water, the chosen working fluid, exhibited greater activity in comparison to water. This distinctive flow behavior contributed to achieving heightened thermal performance efficiency for the Fe3O4/water system, attributed to its faster attainment of the annular flow condition.

RESUMEN

In this study, the heat transfer characteristics within the heat exchanger using water-based GO nanofluids were comprehensively assessed. An apparatus was constructed by scaling down an industrial heat exchanger. The nanofluid's thermal conductivity, specific heat capacity, viscosity, density, Prandtl number, and Nusselt number were examined at varying temperatures and GO nanoparticle concentrations. The results revealed that the thermal conductivity of the nanofluid increased with both temperature and nanoparticle concentration, reaching a peak value of 0.380 W m-1 K-1 at 85 °C and 0.1 wt %, leading to enhanced heat transfer rates through conduction and convection mechanisms. The specific heat capacity increased with temperature but decreased with higher GO nanoparticle contents with a maximum value of 3403.821 J kg-1 K-1 recorded at 40 °C and 0.01 wt %. The viscosity of the nanofluid increased with higher concentrations of GO nanoparticles, and the minimum value of 0.83 mPa s was observed at 85 °C and 0.01 wt %. The Prandtl number decreased with the temperature but increased with increasing GO nanoparticle concentration, suggesting a transition from convective to conductive heat transfer. A newly derived correlation equation for the Nusselt number, Nu = 0.0059(1 + 7.62ϕ0.6886)Pe 0.001 Re 0.9238 Pr 0.4, allows predicting heat transfer enhancement in nanofluids. The findings emphasize the potential of nanofluids for improving heat exchanger performance and offer valuable insights into optimizing nanofluid applications in thermal systems.

RESUMEN

Natural gas stands as the most ecologically sustainable fossil fuel, constituting nearly 25% of worldwide primary energy utilization and experiencing rapid expansion. This article offers an extensive comparative analysis of nano filter elements, focusing on pressure drop and pollutant removal efficiency. The primary goal was to assess the superior performance of nano filter elements and their suitability as an alternative for Town Border Station (TBS). The research encompassed a six-month examination period, involving routine pressure assessments, structural examinations, and particle characterization of the filter elements. The results revealed that nano filters showed better performance in adsorbing aluminum than conventional filters, possibly due to their cartridge composition. Nano filters contained phosphorus, sulfur, and copper, while conventional filters lacked these elements. The disparity can be attributed to the finer mesh of the nano filter, capturing smaller pollutants. Although the nano filter had minimal silicon, the conventional filter showed some, posing concerns. Despite having 19 extra pleats, the nano filter maintained gas flow pressure while capturing more particles than the conventional filter.

RESUMEN

This study comprehensively assesses the release rate of biocides, corrosion effects related to antifouling, and the physical properties of different paint types. Tests were conducted to measure thickness, viscosity, hardness, bending, adhesion, gloss, impact resistance, abrasion resistance, scratch resistance, polarization, and salt spray. The paints evaluated include resin-based, acrylic-based, epoxy-based, and vinyl-based formulations. The study investigates the influence of biocide content, biocide particle size, and immersion time on release rate using a lab-scale setup. Results showed that acrylic-based paints had a higher biocide release rate due to faster hydrolysis, while smaller biocide particle sizes led to higher release rates in resin-based paints. Optimal total biocide contents were determined to be 30% for acrylic-based, 60% for epoxy-based, and 50% for vinyl-based paints. Antifouling corrosion analysis demonstrated that sample with an optimal release rate effectively prevent algae growth and fouling. Acrylic-based paint with 30 wt.% biocide content exhibited superior adhesion with a dolly separation force of 4.12 MPa. Evaluating the impact of synthesized polyaniline on 30 wt.% epoxy-based paint, a sample coated with 10 wt.% polyaniline represented a low corrosion rate of 0.35 µm/year and a high impedance value of approximately 37,000 Ohm·cm-2.

RESUMEN

This study aimed to assess the UV-shielding features of the PMMA-based thin film coatings with the addition of TiO2 and ZnO nanoparticles as nanofillers considering different contents. Furthermore, the effect of TiO2/ZnO nanohybrids at different ratios and concentrations was examined. The XRD, FTIR, SEM, and EDX analyses characterized the prepared films' functional groups, structure, and morphology. Meanwhile, the coatings' optical properties and UV-protecting capability were investigated by ultraviolet-visible (UV-Vis) spectroscopy. The UV-Vis spectroscopic study revealed that as the concentration of nanoparticles increased in the hybrid-coated PMMA, the absorption in the UVA region increased. Overall, it can be concluded that the optimal coatings for PMMA were 0.1 wt% TiO2, 0.1 wt% ZnO, and 0.025:0.025 wt% TiO2: ZnO nanohybrid. Considering the acquired FT-IR of PMMA with different content of nanoparticles before and after exposure to the UV irradiation, for some films, it was confirmed that the polymer-based thin films degraded after 720 h, with either decreasing or increasing intensity of the degraded polymer, peak shifting, and band broadening. Notably, the FTIR results were in good agreement with UV-Vis outcomes. In addition, XRD diffraction peaks demonstrated that the pure PMMA matrix and PMMA coating films did not show any characteristic peaks indicating the presence of nanoparticles. All diffraction patterns were similar with and without any nanoparticles. Therefore, it depicted the amorphous nature of polymer thin film.

RESUMEN

In this study, we fabricated an economical, non-toxic, and convenient magnetic nanocomposite of CuFe2O4 nanoparticles (NPs)/carbon quantum dots (CQDs) of citric acid via the co-precipitation method. Afterward, obtained magnetic nanocomposite was used as a nanocatalyst to reduce the ortho-nitroaniline (o-NA) and para-nitroaniline (p-NA) using a reducer agent of sodium borohydride (NaBH4). To investigate the functional groups, crystallite, structure, morphology, and nanoparticle size of the prepared nanocomposite, FT-IR, XRD, TEM, BET, and SEM were employed. The catalytic performance of the nanocatalyst was experimentally evaluated based on the ultraviolet-visible absorbance to assess the reduction of o-NA and p-NA. The acquired outcomes illustrated that the prepared heterogeneous catalyst significantly enhanced the reduction of o-NA and p-NA substrates. The analysis of the absorption showed a remarkable decrease for ortho-NA and para-NA at λmax = 415 nm in 27 s and λmax = 380 nm in 8 s, respectively. The constant rate (kapp) of ortho-NA and para-NA at the stated λmax was 8.39 × 10-2 s-1 and 5.48 × 10-1 s-1. The most highlighted result of this work was that the CuFe2O4@CQD nanocomposite fabricated from citric acid performed better than absolute CuFe2O4 NPs, since nanocomposite containing CQDs had a more significant impact than copper ferrite NPs.

RESUMEN

The primary objective of this research is to investigate the reduction of 4-nitroaniline (4-NA) and 2-nitroaniline (2-NA) using synthesized copper ferrite nanoparticles (NPs) via facile one-step hydrothermal method as a heterogeneous nano-catalyst. Nitroanilines were reduced in the presence and without the catalyst with a constant amount (100 mg) of reducing agent of sodium borohydride (NaBH4 ) at room temperature in water to amino compounds. To characterize the functional groups, size, structure, and morphology of as-prepared magnetic NPs, FTIR, XRD, SEM, and TEM were employed. The UV-Vis spectrum was utilized to explore the catalytic effect of CuFe2 O4 . The outcomes revealed that the synthesized CuFe2 O4 as a heterogeneous magnetic nano-catalyst catalyzed the reduction of 4-NA and 2-NA significantly faster than other candidate catalysts. The outcomes demonstrated that the catalyst catalyzed 4-nitroaniline to para-phenylenediamine (p-PDA) and 2-nitroaniline to ortho-phenylenediamine (o-PDA) with a constant rate of 7.49×10-2  s-1 and 3.19×10-2  s-1 , and conversion percentage of 96.5 and 95.6, in 40 s and 90 s, sequentially. Furthermore, the nanoparticles could be recovered by a magnetic separation method and reused for six consecutive cycles without remarkable loss of catalytic ability.

Asunto(s)

Nanopartículas , Catálisis , Nanopartículas/química , Agua/química

RESUMEN

This study aimed to investigate the effect of titanium dioxide (TiO2) nano additives on the thermal performance of a pilot-scale cross-flow cooling tower. Moreover, it is a continuation of our previous study on the effect of using multi-walled carbon nanotubes (MWCNTs) nanofluid, and the results were compared with the results of TiO2 and previous work. An experimental design by response surface methodology (RSM) based on central composite design (CCD) with two factors (concentration and flow rate) was used to study the effectiveness of the setup, Merkel number, and the cooling range. The nanofluids were prepared by the two-step method. The stability tests were performed considering different surfactants such as Gum Arabic, Triton X-100, and sodium dodecyl sulfate, and Gum Arabic was determined as the optimal surfactant. The visual method, dynamic light scattering (DLS), and Zeta potential analyses were used to ensure the stability of the nanofluids and determine the size distribution of the nanoparticles in the nanofluids. The findings revealed that the heat transfer characteristics of the working fluid were improved with the addition of nanoparticles. Moreover, by comparing the effect of nanoparticles, it was found that MWCNTs could enhance the thermal features better than TiO2. The nanofluid containing 0.085 wt% of the MWCNTs improves the Merkel number, effectiveness, and cooling range by 28, 10.2, and 15.8%, respectively, whereas these values for TiO2 containing nanofluids are 5, 4.1, and 7.4%, respectively. MWCNTs nanofluid with a concentration of 0.069 wt% and a flow rate of 2.092 kg/min was proposed for optimal system setup. Under these conditions, the cooling range, effectiveness, and Merkel number were about 23.5, 55.75%, and 0.64, respectively.

RESUMEN

This study compares the tribological and thermophysical features of the lubricating oil using MoS2 and ZnO nano-additives. The average size of MoS2 and ZnO nanoparticles were 90 nm and 30 nm, respectively. The nanoparticles were suspended using Triton X-100 in three different concentrations (0.1, 0.4 and 0.7 wt.%) in a commercial diesel oil. Tribological properties such as mass loss of the pins, friction coefficient, and worn surface morphologies and thermophysical properties such as viscosity, viscosity index, flash point and pour point of resulting nano lubricant were evaluated and compared with those of pure diesel oil. The tribological behavior of nano lubricants was evaluated using a pin-on-disc tribometer. The worn surface morphologies were observed by scanning electron microscopy. The overall results of this experiment reveal that the addition of nano-MoS2 reduces the mass loss values of the pins in 93% due to the nano-MoS2 lubricant effect. With 0.7 wt.% in nanoparticles content, the viscosity of MoS2 and ZnO nano lubricants at 100 °C increased by about 9.58% and 10.14%, respectively. Pure oil containing 0.7 wt.% of each nanoparticle increased the flash point because of its small size and surface modifying behavior compared to the pure oil. Moreover, the addition of ZnO nanoparticles with pure oil lubricant is more suitable than MoS2 nanoparticles for improving the thermophysical properties of pure oil.