RESUMEN

Cystic echinococcosis is an important cosmopolitan parasitic zoonosis that causes public health and economic problems in Egypt. The present study was undertaken to identify genotypes of hydatid cyst (HC) DNA isolated from different animal isolates and to identify the genotype of secondary hydatid cysts (HCs) developed in rabbits experimentally infected with camel HC for detection of any genetic mutation. In the present study, we extracted DNA from the germinal layers of 8 HCs collected from 3 camels, 1 cattle, 1 sheep and 3 donkeys in addition to 3 secondary HCs collected from rabbits experimentally infected with camel HC. PCR amplification of the ITS1 gene of all examined samples showed an amplified DNA band at 1115 bp. The partial nucleotide sequences of the ITS1 gene of all isolates were aligned and compared with the reference sequences of the genotypes G1-G8 in GenBank. The camel and rabbit samples were identified as Echinococcus canadensis genotype 6 (G6), while the cattle and sheep samples belonged to E. granulosus sensu stricto (G1). The donkey isolates belonged to E. equines (G4). Alignment of the ITS1 partial nucleotide sequences of the camel HCs and rabbit secondary HCs isolates with the G6 partial nucleotide sequence in GenBank was performed. Both camel HCs and rabbit secondary HCs isolates exhibited the same sequence identity matrix, which indicated the absence of mutation in the rabbit secondary HCs. It can be concluded that camel and rabbit samples were identified as E. canadensis (G6), the cattle and sheep samples belonged to E. granulosus sensu stricto (G1) and donkey isolates belonged to E. equines (G4). No mutation occurred during HCs transmission from camel to rabbit.

RESUMEN

Toxocara canis of dogs and Toxocara vitulorum of cattle and buffalo are nematode parasites that cause serious economic and public health problems all over the world. This study aims to provide molecular data to identify and distinguish between Toxocara spp. from dogs, cattle and buffalo in Egypt. Moreover, constructing a phylogeny and phylogenetic relationships among these Toxocara spp. were performed through an analytic study of ATPase-6, a mitochondrial gene; 12S, small subunit ribosomal RNA gene and ITS-2, the second internal transcribed spacer nuclear ribosomal gene. T. vitulorum from cattle and buffalo were found to be almost identical. The ATPase- 6 and 12S regions showed 87.78 % and 90.38 % nucleotide similarity between T. canis and T. vitulorum, while for the ITS-2 region, only 78.38 % was found. Analysis of the three studied genes revealed that each Toxocara spp. has distinct molecular characteristics. Moreover, it was revealed that these genes, especially the ITS-2 gene, are useful and sensitive molecular markers for classifying and studying the phylogenetic analysis and relationships among closely related Toxocara spp. All sequences obtained in this study were registered in the GenBank under the accession numbers: MG214149 -MG214157.

RESUMEN

AIMS: This study investigated the possible role of Fayoumi chickens and pigeons in the transmission of multidrug resistant (MDR) Salmonella with zoonotic potential. METHODS AND RESULTS: Morbid Fayoumi chickens (70) and pigeons (30) were examined to detect the prevalence and antibiotic resistance of Salmonella and to detect and sequence sodC-1 gene as a zoonotic and phylogenetic marker. Salmonella isolates were detected in 14·3 and 20% of the examined Fayoumi chickens and pigeons, respectively. Salomonella subspecies salamae (43·8%) and S. subspecies enterica serovar Bukuru (31·3%) were the most prevalent isolates. All tested Salmonella isolates were MDR to at least five classes of antibiotics. S. salamae and S. Bukuru isolates that carried blaTEM , qnrS, aadA2 and floR genes expressed phenotypic resistance to cefotaxime, ciprofloxacin, streptomycin and chloramphenicol, respectively. The aacC gene was detected in one of each S. salamae and S. Bukuru isolate, although only the S. Bukuru isolate showed phenotypic resistance to gentamicin. The sequence analysis of the sodC-1 gene from Salmonella isolates showed clear inter- and intra-subspecies phylogenetic segregation. CONCLUSIONS: Fayoumi chickens and pigeons could act as reservoirs of MDR Salmonella. SIGNIFICANCE AND IMPACT OF THE STUDY: This study highlights the possible emergence of Salmonella subspecies salamae with zoonotic potential.

Asunto(s)

RESUMEN

BACKGROUND: Postoperative pain after breast cancer surgery is not uncommon. Narcotic based analgesia is commonly used for postoperative pain management. However, the side-effects and complications of systemic narcotics is a significant disadvantage. Different locoregional anesthetic techniques have been tried including, single and multiple levels paravertebral block (PVB), which seems to have a significant reduction in immediate postoperative pain with fewer side-effects. The aim of this study was to compare unilateral multiple level PVB versus morphine patient-controlled analgesia (PCA) for pain relief after breast cancer surgery with unilateral lumpectomy and axillary lymph nodes dissection. MATERIALS AND METHODS: Forty patients scheduled for breast cancer surgery were randomized to receive either preoperative unilateral multiple injections PVB at five thoracic dermatomes (group P, 20 patients) or postoperative intravenous PCA with morphine (group M, 20 patients) for postoperative pain control. Numerical pain scale, mean arterial pressure, heart rate, Time to first analgesic demand, 24-h morphine consumption side-effects and length of hospital stay were recorded. RESULTS: PVB resulted in a significantly more postoperative analgesia, maintained hemodynamic, more significant reduction in nausea and vomiting, and shorter hospital stay compared with PCA patients. CONCLUSION: Multiple levels PVB is an effective regional anesthetic technique for postoperative pain management, it provides superior analgesia with less narcotics consumption, and fewer side-effects compared with PCA morphine for patients with breast cancer who undergo unilateral lumpectomy, with axillary lymph nodes dissection.

RESUMEN

Fourteen isolates of Corynebacteruim pseudotuberculosis of them 7 were isolated from sheep with Caseous Lymphadenitis "biotype 1" and 7 isolated from buffaloes with Oedematous Skin Disease "biotype 2". All isolates were identified by standard microbiological techniques and by polymerase chain reaction targeting, 16S rRNA and phospholipase D genes. Synergistic haemolytic titers of all isolates were assayed by plate technique. The presences of phospholipase D gene in supernatants of all isolates were performed by sodium dodecyl sulfate polyacrylamide gel electrophoresis immunoblot technique by using hyperimmune serum raised in rabbit immunized with recombinant phospholipase D gene antigen. The concentration of phospholipase D gene was assayed by scanning the bound phospholipase D gene with specific antibodies that appeared at 31.5 kDa. Results presented that there is no correlation between titer of Synergistic haemolytic activity and the actual phospholipase D genes concentration in culture supernatants. Also results presented that Synergistic haemolytic activity and phospholipase D genes produced by biotype 2 (buffalo isolates) was generally higher than those by biotype 1(sheep isolates).

Asunto(s)

RESUMEN

Fourteen isolates of Corynebacteruim pseudotuberculosis of them 7 were isolated from sheep with Caseous Lymphadenitis "biotype 1" and 7 isolated from buffaloes with Oedematous Skin Disease "biotype 2". All isolates were identified by standard microbiological techniques and by polymerase chain reaction targeting, 16S rRNA and phospholipase D genes. Synergistic haemolytic titers of all isolates were assayed by plate technique. The presences of phospholipase D gene in supernatants of all isolates were performed by sodium dodecyl sulfate polyacrylamide gel electrophoresis immunoblot technique by using hyperimmune serum raised in rabbit immunized with recombinant phospholipase D gene antigen. The concentration of phospholipase D gene was assayed by scanning the bound phospholipase D gene with specific antibodies that appeared at 31.5 kDa. Results presented that there is no correlation between titer of Synergistic haemolytic activity and the actual phospholipase D genes concentration in culture supernatants. Also results presented that Synergistic haemolytic activity and phospholipase D genes produced by biotype 2 (buffalo isolates) was generally higher than those by biotype 1(sheep isolates).

RESUMEN

AIMS: This study was conducted to characterize the growth of and aflatoxin production by Aspergillus flavus on paddy and to develop kinetic models describing the growth rate as a function of water activity (a(w)) and temperature. METHODS AND RESULTS: The growth of A. flavus on paddy and aflatoxin production were studied following a full factorial design with seven a(w) levels within the range of 0·82-0·99 and seven temperatures between 10 and 43°C. The growth of the fungi, expressed as colony diameter (mm), was measured daily, and the aflatoxins were analysed using HPLC with a fluorescence detector. The maximum colony growth rates of both isolates were estimated by fitting the primary model of Baranyi to growth data. Three potentially suitable secondary models, Rosso, polynomial and Davey, were assessed for their ability to describe the radial growth rate as a function of temperature and a(w). Both strains failed to grow at the marginal temperatures (10 and 43°C), regardless of the a(w) studied, and at the a(w) level of 0·82, regardless of temperature. Despite that the predictions of all studied models showed good agreement with the observed growth rates, Davey model proved to be the best predictor of the experimental data. The cardinal parameters as estimated by Rosso model were comparable to those reported in previous studies. Toxins were detected in the range of 0·86-0·99 a(w) with optimal a(w) of 0·98 and optimal temperature in the range of 25-30°C. CONCLUSIONS: The influences of a(w) and temperature on the growth of A. flavus and aflatoxin production were successfully characterized, and the models developed were found to be capable of providing good, related estimates of the growth rates. SIGNIFICANCE AND IMPACT OF THE STUDY: The results of this study could be effectively implemented in minimizing the risk of aflatoxin contamination of the paddy at postharvest.

Asunto(s)

RESUMEN

The value of cercarial antigen for diagnosis of experimental and natural sheep fasciolosis was studied by enzyme linked immunosorbent assay (ELISA) and enzyme linked immunotransfer blot (EITB). In ELISA, the antibody levels of experimentally infected sheep with Fasciola gigantica appeared at 2 weeks post infection (PI), gradually increased till 7 weeks PI and nearly remained at the same level from 7 to 13 weeks PI (the end of experiment). Also, the sensitivity and specificity of cercarial antigen for diagnosis of naturally sheep fasciolosis were 100 and 90%, respectively. In EITB, in the sheep experimentally infected with F. gigantica, the band of 32.5kDa molecular weight polypeptide appeared at 2 weeks PI and continued till the end of experiment. Also, the cercarial antigen recognized 32.5kDa molecular weight band with all sera from naturally infected sheep with fasciolosis (n = 25). This band did not cross-react when tested with sera from infected sheep with Cysticercus tenuicollus (n = 20). This study suggests that, the 32.5kDa molecular weight polypeptide could be used as sensitive and specific epitope for the serodiagnosis of sheep fasciolosis.

Asunto(s)

RESUMEN

We reported previously that a bioactive PMMA-based cement was obtained by using a dry method of silanation of apatite-wollastonite glass ceramic (AW-GC) particles, and using high molecular weight PMMA particles. But handling and mechanical properties of the cement were poor (Mousa et al., J Biomed Mater Res 1999;47:336-44). In the present study, we investigated the effect of the characteristics of PMMA powder on the cement. Different cements containing different PMMA powders (CMW1, Surgical Simplex, Palacos-R and other two types of PMMA powders with Mw 270,000 and 1,200,000) and AW-GC filler in 70 wt% ratio except Palacos-R (abbreviated as B-CMW1 and B-Surg Simp, B-Palacos 50 [50 wt% AW-GC filler] and B-Palacos 70 [70 wt% AW-GC filler], B-270 and B-1200) were made. Dough and setting times of B-CMW1, B-Surg Simp B-270 and B-1200 were similar to the commercial CMW1 cement which did not contain bioactive powder (C-CMW1), but B-palacos which contained large PMMA beads with high Mw had delayed setting time. B-270 had the highest bending strength among the tested cements. After 4 and 8 weeks of implantation in the medullary canals of rat tibiae, the bone-cement interface was examined using SEM. The affinity index of B-1200 was significantly higher than the other types of cements. B-270 showed good combination of handling properties, high mechanical properties and showed higher bioactivity with minimal soft tissue interposition between bone and cement compared with commercial PMMA bone cement. This may increase the strength of the bone-cement interface and increase the longevity of cemented arthroplasties.

Asunto(s)

RESUMEN

UNLABELLED: Little is known about the mechanism of thiopental-induced contraction in vascular smooth muscle. This study aimed to clarify this question by conducting isometric tension experiments and (45)Ca(2+) flux measurements in endothelium-denuded rat aortic rings. Thiopental induced a concentration-dependent contraction under basal tension. This contraction was enhanced when rings were precontracted with phenylephrine in the presence of verapamil. In Ca(2+)-free solution, thiopental-induced contraction was reduced but not abolished with high concentrations. Ca(2+) store depletion with a maximum dose of caffeine in Ca(2+)-free solution further reduced the contraction by subsequent thiopental. Ca(2+) store depletion with thapsigargin completely abolished contraction by thiopental. (45)Ca(2+) influx experiment in the presence of verapamil showed that thiopental could not induce any Ca(2+) influx with or without phenylephrine prestimulation. The (45)Ca(2+) efflux experiment showed more evidence of thiopental-induced Ca(2+) release, which was abolished by thapsigargin. In conclusion, thiopental induces contraction in rat aortic smooth muscle by releasing Ca(2+) from the sarcoplasmic reticulum without Ca(2+) influx. IMPLICATIONS: This is the first study providing evidence that thiopental-induced vascular contraction is caused by Ca(2+) release from the sarcoplasmic reticulum of the smooth muscle.

Asunto(s)

RESUMEN

A new bioactive bone cement (designated GBC) consisting of polymethyl methacrylate (PMMA) as an organic matrix and bioactive glass beads as an inorganic filler has been developed. The bioactive beads, consisting of MgO-CaO-SiO(2)-P(2)O(5)-CaF(2) glass, have been newly designed, and a novel PMMA powder was selected. The purpose of the present study was to compare this new bone cement GBC's mechanical properties in vitro and its osteoconductivity in vivo with cements consisting of the same matrix as GBC and either apatite- and wollastonite-containing glass-ceramic (AW-GC) powder (designated AWC) or sintered hydroxyapatite (HA) powder (HAC). Each filler added to the cements amounted to 70 wt %. The bending strength of GBC was significantly higher than that of AWC and HAC (p < 0.0001). Cements were packed into intramedullar canals of rat tibiae in order to evaluate osteoconductivity as determined by an affinity index. Rats were sacrificed at 2, 4, and 8 weeks after operation. An affinity index, which equaled the length of bone in direct contact with the cement expressed as a percentage of the total length of the cement surface, was calculated for each cement. At each time interval studied, GBC showed a significantly higher affinity index than AWC or HAC up to 8 weeks after implantation (p < 0.03). The value for GBC increased significantly with time up to 8 weeks (p < 0.006). The handling property of GBC was comparable with that of PMMA bone cement. Our study revealed that the higher osteoconductivity of GBC was due to the higher bioactivity of the bioactive glass beads at the cement surface and the lower solubility of the new PMMA powder to MMA monomer. In addition, it was found that the smaller spherical shape and glassy phase of the glass beads gave GBC strong enough mechanical properties to be useful under weight-bearing conditions. GBC shows promise as an alternative with improved properties to the conventionally used PMMA bone cement.

Asunto(s)

RESUMEN

The fact that bisphenol-a-glycidyl methacrylate (bis-GMA)-based cements contain an uncured surface is believed to play an important role when determining the surface curing properties of the cements. Therefore, in the present study, the bone-bonding strength of cement plates having an uncured surface on one side and a cured surface on the other side has been evaluated. These cement plates were composites of a bis-GMA-based resin with either an apatite- and wollastonite-containing glass-ceramic (AW-GC) powder or a hydroxyapatite (HA) powder, respectively designated AWC and HAC. The amount of each of these powders in a composite cement was 70 wt %. We formulate the hypothesis that the uncured surface of a cement plate is bioactive having bone-bonding properties. The goal of the present study was to indicate the bone-bonding strength of the uncured surfaces of AWC and HAC and compare the strength with the respective cured surfaces by a detaching in vivo test, as well as to histologically examine the bone-cement interface. Each plate has been implanted into the tibiae of male Japanese white rabbits, taking care to retain the surface properties, and the so-called "failure load has been measured using a detaching test followed 8 weeks after implantation. The failure load for AWC-plates at the uncured surface (2.05 +/- 1.11 kgf, n = 8) was significantly higher than AWC at its cured surface side (0.28 +/- 0.64 kgf, n = 8). The failure load for HAC-plates at the uncured surfaces (1.40 +/- 0.68 kgf, n = 8) was significantly higher than HAC at its cured surface (0.00 +/- 0.00 kgf, n = 8). Failure loads for AWC at its uncured and cured surfaces were both higher than for HAC, although not significantly. Direct bone formation has been observed histologically for both AWC and HAC on the uncured surfaces, and a Ca-P-rich layer was observed only at the uncured surface of AWC. These findings strongly suggest that uncured surfaces are useful for exposing a bioactive filler on a surface of composites, being very effective in inducing bone bonding.

Asunto(s)

RESUMEN

Bioactive bone cement (BABC) is able to bond to bone through a Ca-P rich layer. It was evaluated so far in a rat tibial model, where no mechanical stresses are supposed to take place. The objective is to investigate the behavior of BABC in the environment of posterolateral spinal fixation model, in which the bone cement interface is exposed to continuous mechanical stress. Japanese white rabbits were used. Fixation of L5-L6 segment was done by wiring the spinous and transverse processes of L5 and L6 vertebrae. Then BABC was applied over the transverse processes and the intertransverse process membrane on both sides. Polymethylmethacrylate (PMMA) bone cement was used similarly in the control group. Animals were sacrificed after 1 day, 4, 8, and 16 weeks postoperatively. Bone cement interface was examined using Giemsa surface staining and SEM, and affinity index was measured. Biomechanical testing was done nondestructively in right and left torsion. BABC bonded to bone directly with no intervening soft tissue at 4, 8, and 16 weeks, while soft tissue was consistently seen between PMMA bone cement and bone. BABC-spine constructs were stiffer than PMMA-spine constructs at all time intervals. BABC bonded directly to bone under mechanical stress and afforded stiffer fixation than PMMA bone cement.

Asunto(s)

RESUMEN

In methylmethacrylate (MMA)-based cements containing bioactive particles, polymethylmetacrylate (PMMA) is known to suppress the bioactivity of Bioglass(R) and apatite-wollastonite glass ceramic (AW-GC). Little is known about the effect of different silane treatment methods on the bioactivity of AW-GC. MMA-based cement plates containing dry silanated AW-GC particles and PMMA particles of different molecular weights (12,000-900,000) were immersed in simulated body fluid (SBF). Cements containing PMMA particles of high molecular weight formed an apatite layer on the surface after 24 h. Using PMMA particles with a molecular weight of 60,000 and AW-GC particles silanated with different methods (dry method vs. slurry method), cement plates were made and immersed in SBF. Only cement plates containing dry silanated AW-GC particles showed apatite formation in SBF after 3 days. In vivo implantation in rat tibias of MMA-based cement containing dry silanated AW-GC particles and PMMA particles (molecular weight 900,000) demonstrated an affinity index of 32.1 +/- 15.8% after 8 weeks of implantation compared to 89.4 +/- 10.7% achieved by bisphenol-A-glycidyl methacrylate based cement containing the same bioactive powder. By using a dry method of silane treatment and high molecular weight PMMA particles, the bioactivity of cement based on MMA monomer was achieved; but further effort is needed to improve the mechanical properties of the composite.

Asunto(s)

RESUMEN

We took three types of bioactive bone cement (designated AWC, HAC, and TCPC), each with a different bioactive filler, and evaluated the influence of each filler on the mechanical properties and osteoconductivity of the cement. The cements consisted of bisphenol-a-glycidyl methacrylate-based (Bis-GMA based) monomers as an organic matrix, with a bioactive filler of apatite/wollastonite containing glass-ceramic (AW-GC) or sintered hydroxyapatite (HA) or beta-tricalcium phosphate (beta-TCP) powder. Each filler was mixed with the monomers in proportions of 50, 70, and 80% (w/w), giving a total of nine cement subgroups. The nine subgroups were designated AWC50, AWC70, AWC80, HAC50, HAC70, HAC80, TCPC50, TCPC70, and TCPC80. The compressive and bending strengths of AWC were found to be higher than those of HAC and TCPC for all bioactive filler contents. We also evaluated the cements in vivo by packing them into the intramedullary canals of rat tibiae. To compare the osteoconductivity of the cements, an affinity index was calculated for each cement; it equaled the length of bone in direct apposition to the cement, expressed as a percentage of the total length of the cement surface. Microradiographic examination up to 26 weeks after implantation revealed that AWC showed a higher affinity index than HAC and TCPC for each filler content although the affinity indices of all nine subgroups (especially the AWC and HAC subgroups) increased with time. New bone had formed along the AWC surface within 4 weeks, even in the cement containing AW-GC filler at only 50% (w/w); observation of the cement-bone interfaces using a scanning electron microscope showed that all the cements had directly contacted the bone. At 4 weeks the AWC had bonded to the bone via a 10 micron-thick reactive layer; the width of the layer, in which partly degraded AW-GC particles were seen, became slightly thicker with time. On the other hand, in the HAC- and TCPC-implanted tibiae, some particles on the cement surface were surrounded by new bone and partly absorbed or degraded. The results suggest that the stronger bonding between the inorganic filler and the organic matrix in the AWC cements gave them better mechanical properties. The results also indicate that the higher osteoconductivity of AWC was caused by the higher reactivity of the AW-GC powder on the cement surface.

Asunto(s)

RESUMEN

A study was conducted to evaluate the osteoconductivity and bone-bonding ability of two types of bioactive bone cement, both consisting of apatite and wollastonite containing glass-ceramic powder (AW-P), fused silica glass powder (SG-P), submicron fumed silica as an inorganic filler, and bisphenol-a-glycidyl methacrylate (Bis-GMA) based resin as an organic matrix. The cements had two kinds of formulas: one (dough-type cement; designated DTC) composed of 85% (w/w) filler and 15% resin, which was developed for fixation of the acetabular component in total hip arthroplasty and could be handled manually; and one (injection-type cement; designated ITC) composed of 79% (w/w) filler and 21% resin. ITC was developed for fixation of the femoral component and, because it had a lower viscosity than DTC, could be injected. The DTC and ITC both contained 73% AW-P, 25% SG-P, and 2% fumed silica in the weight ratio of the filler component. Two other types of cement, both of which consisted of 83.3% AW-P or SG-P, 1.7% fumed silica, and 15% resin, were used as reference material (designated AWC or SGC) for a detaching test. Following the packing of bone defects in the rat tibiae with either DTC or ITC, histological examination revealed that the DTC and ITC had both directly contacted the bone and were almost completely surrounded by bone by 16 weeks after the surgery and that no marked biodegradation had occurred at 52 weeks postimplantation. Rectangular plates (2 x 10 x 15 mm) of AWC, DTC, ITC, and SGC were implanted into the metaphysis of the tibia of male rabbits and the failure load was measured by a detaching test at 10 and 25 weeks after implantation. The failure loads of AWC, DTC, ITC, and SGC were 3.65, 2.21, 2.44, and 0.04 kgf at 10 weeks and 4.87, 2. 81, 2.82, and 0.13 kgf at 25 weeks, respectively. Observation of the bone-implant interface by scanning electron microscopy and energy dispersive X-ray microanalysis revealed that all the samples except SGC formed direct contact with the bone and that only AWC-implanted tibiae had a layer of a low calcium and phosphorus level at the bone-implant interface. Results showed that DTC and ITC have excellent osteoconductivity and bone-bonding ability under non-weight-bearing conditions.

Asunto(s)

RESUMEN

Serum glycoprotein electrophoretic fractions as well as protein bound hexose and seromucoid levels were measured in 21 male Egyptian patients before and after treatment for schistosomiasis, and in 8 normal controls. Results indicate that alpha1 and gamma-glycoprotein were significantly higher while beta-glycoprotein was lower in bilharzial patients than in controls. Protein-bound hexose and seromucoid levels were also significantly elevated in the patients. After treatment, the levels of these fractions approached those of the controls.

Asunto(s)

RESUMEN

Plasma total lipid phosphorus, individual phospholipid fractions, free and esterified cholesterol, triglycerides and nonesterified fatty acids were fractionated by thin-layer chromatography and determined in bilharzial hepatic fibrosis patients (57 cases) and normal controls (25 cases). Significant diminutions were encountered in the total and the individual phospholipids, especially the lysolecithin fraction in the 3 groups of patients studied. Total and esterified cholesterol and triglycerides showed significant decreases, especially in moderate and late cases. NEFA, on the other hand, did not reveal any change from normal level in either moderate, late or mixed cases. Such findings may be attributed to malabsorption, lack of energy, insufficiency of required precursors as well as impaired synthesis by the liver.

Asunto(s)

Asunto(s)

Asunto(s)