RESUMEN

Coefficient of friction (COF) tests were conducted on 28-mm and 36-mm-diameter hip joint prostheses for four different material combinations, with or without the presence of Ultra High Molecular Weight Polyethylene (UHMWPE) particles using a novel pendulum hip simulator. The effects of three micro dimpled arrays on femoral head against a polyethylene and a metallic cup were also investigated. Clearance played a vital role in the COF of ceramic on polyethylene and ceramic on ceramic artificial hip joints. Micro dimpled metallic femoral heads yielded higher COF against a polyethylene cup; however, with metal on metal prostheses the dimpled arrays significantly reduced the COF. In situ images revealed evidence that the dimple arrays enhanced film formation, which was the main mechanism that contributed to reduced friction.

Asunto(s)

RESUMEN

Wear debris, of deferent sizes, shapes and quantities, generated in artificial hip and knees is largely confined to the bone and joint interface. This debris interacts with periprosthetic tissue and may cause aseptic loosening. The purpose of this review is to summarize and collate findings of the recent demonstrations on debris characterization and their biological response that influences the occurrence in implant migration. A systematic review of peer-reviewed literature is performed, based on inclusion and exclusion criteria addressing mainly debris isolation, characterization, and biologic responses. Results show that debris characterization largely depends on their appropriate and accurate isolation protocol. The particles are found to be non-uniform in size and non-homogeneously distributed into the periprosthetic tissues. In addition, the sizes, shapes, and volumes of the particles are influenced by the types of joints, bearing geometry, material combination, and lubricant. Phagocytosis of wear debris is size dependent; high doses of submicron-sized particles induce significant level of secretion of bone resorbing factors. However, articles on wear debris from engineered surfaces (patterned and coated) are lacking. The findings suggest considering debris morphology as an important parameter to evaluate joint simulator and newly developed implant materials.

RESUMEN

The human tooth faces different stresses under environments of different loading conditions, these loading produces major factors in weakness of the tooth and bone structure. The need to save natural teeth has prompted the development of novel and complex techniques in endodontology, prosthodontics and periodontology. Despite a poor long-term prognosis and some prejudice to local bone, considerable efforts have been exerted for the realization of these techniques. Nowadays, the 3D finite element analysis (FEA) is one of the more recently used techniques for stress analysis in single human tooth under different loading cases. The von Mises stress distribution indicated that the greatest effort area of tooth lies at the base of crown up to the gingival line with varying intensities in the different loading cases. The highest stress in the cortical bone was predominantly found around the cervical region of the tooth and lowest in the cancellous bone and periodontal ligament (PDL). The PDL is a soft tissue, and it could function as an intermediate cushion element which absorbs the impact force and uniformly transfers the occlusal forces into the surrounding bone.

Asunto(s)

RESUMEN

BACKGROUND: Many foot pathologies are associated with specific foot types. If foot structure and function are related, measurement of either could assist with differential diagnosis of pedal pathologies. HYPOTHESIS: Biomechanical measures of foot structure and function are related in asymptomatic healthy individuals. METHODS: Sixty-one healthy subjects' left feet were stratified into cavus (n=12), rectus (n=27) and planus (n=22) foot types. Foot structure was assessed by malleolar valgus index, arch height index, and arch height flexibility. Anthropometrics (height and weight), age, and walking speed were measured. Foot function was assessed by center of pressure excursion index, peak plantar pressure, maximum force, and gait pattern parameters. Foot structure and anthropometric variables were entered into stepwise linear regression models to identify predictors of function. RESULTS: Measures of foot structure and anthropometrics explained 10-37% of the model variance (adjusted R(2)) for gait pattern parameters. When walking speed was included, the adjusted R(2) increased to 45-77% but foot structure was no longer a factor. Foot structure and anthropometrics predicted 7-47% of the model variance for plantar pressure and 16-64% for maximum force parameters. All multivariate models were significant (p<0.05), supporting acceptance of the hypothesis. DISCUSSION AND CONCLUSION: Foot structure and function are related in asymptomatic healthy individuals. The structural parameters employed are basic measurements that do not require ionizing radiation and could be used in a clinical setting. Further research is needed to identify additional predictive parameters (plantar soft tissue characteristics, skeletal alignment, and neuromuscular control) and to include individuals with pathology.

Asunto(s)

RESUMEN

BACKGROUND: Differences in foot structure are thought to be associated with differences in foot function during movement. Many foot pathologies are of a biomechanical nature and often associated with foot type. Fundamental to the understanding of foot pathomechanics is the question: do different foot types have distinctly different structure and function? AIM: To determine if objective measures of foot structure and function differ between planus, rectus and cavus foot types in asymptomatic individuals. METHODS: Sixty-one asymptomatic healthy adults between 18 and 77 years old, that had the same foot type bilaterally (44 planus feet, 54 rectus feet, and 24 cavus feet), were recruited. Structural and functional measurements were taken using custom equipment, an emed-x plantar pressure measuring device, a GaitMat II gait pattern measurement system, and a goniometer. Generalized Estimation Equation modeling was employed to determine if each dependent variable of foot structure and function was significantly different across foot type while accounting for potential dependencies between sides. Post hoc testing was performed to assess pair wise comparisons. RESULTS: Several measures of foot structure (malleolar valgus index and arch height index) were significantly different between foot types. Gait pattern parameters were invariant across foot types. Peak pressure, maximum force, pressure-time-integral, force-time-integral and contact area were significantly different in several medial forefoot and arch locations between foot types. Planus feet exhibited significantly different center of pressure excursion indices compared to rectus and cavus feet. CONCLUSIONS: Planus, rectus and cavus feet exhibited significantly different measures of foot structure and function.

Asunto(s)

RESUMEN

BACKGROUND: Conventional swallowing therapy for patients with Parkinson's disease (PD) and swallowing difficulties has poor carryover to everyday life. Herein, we test the effectiveness of visual information while treating swallowing disturbances in patients with PD. METHODS: Forty two non-demented PD patients with swallowing disturbances were randomly divided into two groups. An experimental group received video-assisted swallowing therapy (VAST) and a control group (n = 21) was given conventional therapy. Both groups were given 6 interventional sessions by the same speech and swallowing therapist. Patients in the VAST group were exposed to video of the swallowing process in general as well as of their own, as part of all therapy sessions. Swallowing function was assessed before and post-intervention by fiberoptic endoscopic evaluation of swallowing (FEES). Quality of life, quality of care and the degree of pleasure from eating were also assessed by questioners pre and post-intervention. RESULTS: There was a significant improvement in swallowing functions following both interventions. The FEESs demonstrated a significantly greater reduction in food residues in the pharynx in the VAST group compared to the conventional treatment group. There were significant group improvement in some parameters of the quality of life, quality of care and pleasure of eating scales. CONCLUSION: In cognitively intact patients with PD with swallowing disturbances VAST was associated with improved swallowing related QOL and less food residues in the pharynx.

Asunto(s)

RESUMEN

Swallowing disturbances (SDs), anxiety and depression are commonly present in Parkinson's disease (PD) patients. We hypothesized that there is an association between the presence of SDs and the PD affective state. Sixty-nine PD patients were assessed for the presence of SDs by undergoing cognitive screening with the Mini Mental State Examination (MMSE), completing three inventories: a swallowing disturbance questionnaire (SDQ), the Spielberger manual for the trait anxiety and Beck depression inventories. All patients underwent clinical swallowing evaluations by a speech and language pathologist (SLP). Patients diagnosed with SDs were also assessed by fiberoptic endoscopic evaluation of swallowing (FEES) performed by an ENT and SLP. Thirty-eight patients experienced SDs, the other 31 did not. The clinical characteristics of the two groups were matched. Patients with SDs experienced increased anxiety and depression compared to patients without SDs. Comparisons between patients who scored in the two opposite ends of the anxiety and depression ranges demonstrated that the most anxious and depressed patients reported more swallowing difficulties (SDQ scores) compared with the least anxious and depressed ones. In addition, the most anxious patients had significantly increased disease severity and decreased MMSE scores compared with the least anxious patients. Disease severity was also increased in the most depressed patients compared with the least depressed ones. Advanced disease emerged as being associated with high anxiety levels and greater numbers of SDs. The contribution of anxiety or depression to the development or worsening of SDs and their role in treatment strategy warrant further investigation.

Asunto(s)

RESUMEN

Although surgical fixation techniques are major contributing factors to the survivorship of total hip replacements, they vary considerably among orthopaedic surgeons. We investigated the effect of the following configuration of anchorage holes on the stability of acetabular component fixation: 3 x 12 mm, 3 x 6 mm, 6 x 6 mm, and 12 x 6 mm. The reconstructed acetabulae were tested to torque failure, whilst being subjected to a compressive load of 2.1 KN. Higher torque to failure values were obtained for specimens with three 12 mm anchorage holes, compared with six or more 6 mm anchorage holes and were in line with our computer simulation results. We propose that the longevity of cemented total hip replacements could be improved by drilling a few large anchorage holes.

Asunto(s)

RESUMEN

BACKGROUND: Intramedullary plugs are key factors in improving cement fixation of the femoral component. We investigated the performance of 3 commercially available resorbable cement restrictors in vitro and in vivo. METHODS: We measured the migration of the SEM II, the C-plug, and the REX plug in 15 Sawbones synthetic femurs and in 103 patients during total hip surgery. Cement pressures were also measured distally and proximally in vitro. RESULTS AND INTERPRETATION: Our in vitro results showed poor performance of the C-plug compared with the REX and SEM II plugs. In vivo, the mean migration was least for the SEM plug and most for the C-plug. The smaller sizes performed significantly better than the larger ones for all 3 plug types. The overall in vivo performance of all 3 plug types was unsatisfactory. Differences between the SEM II and REX plugs were small and therefore not significant. The SEM II performed better than the REX, the former being much cheaper and easier to insert. The Rex plug looks promising; however, the insertion device must be improved for better results. The C-plug proved to be unstable.

Asunto(s)