RESUMEN
Starch and cellulose are the most abundant and important representatives of renewable biomass. Since the mid-19th century their properties have been changed by chemical modification for commercial and scientific purposes, and there substituted polymers have found a wide range of applications. However, the inherent polydispersity and supramolecular organization of starch and cellulose cause the products resulting from their modification to display high complexity. Chemical composition analysis of these mixtures is therefore a challenging task. Detailed knowledge on substitution patterns is fundamental for understanding structure-property relationships in modified cellulose and starch, and thus also for the improvement of reproducibility and rational design of properties. Substitution patterns resulting from kinetically or thermodynamically controlled reactions show certain preferences for the three available hydroxyl functions in (1â4)-linked glucans. Spurlin, seventy years ago, was the first to describe this in an idealized model, and nowadays this model has been extended and related to the next hierarchical levels, namely, the substituent distribution in and over the polymer chains. This structural complexity, with its implications for data interpretation, and the analytical approaches developed for its investigation are outlined in this article. Strategies and methods for the determination of the average degree of substitution (DS), monomer composition, and substitution patterns at the polymer level are presented and discussed with respect to their limitations and interpretability. Nuclear magnetic resonance spectroscopy, chromatography, capillary electrophoresis, and modern mass spectrometry (MS), including tandem MS, are the main instrumental techniques employed, in combination with appropriate sample preparation by chemical and enzymatic methods.
Asunto(s)
Celulosa/análogos & derivados , Celulosa/química , Almidón/análogos & derivados , Almidón/química , Cinética , Polimerizacion , TermodinámicaRESUMEN
Endoglucanases are useful tools in the chemical structure analysis of cellulose derivatives. However, knowledge on the endoglucanase selectivity, which is of central importance for data interpretation, is still limited. In this study, new reverse-phase liquid chromatography mass spectrometry (LC-MS) methods were developed to investigate the selectivity of the endoglucanases Cel5A, Cel7B, Cel45A, and Cel74A from the filamentous fungus Trichoderma reesei. The aim was to improve the identification of the regioisomers in the complex mixtures that are obtained after enzymatic hydrolysis. Reduction followed by per-O-methylation was performed in order to improve the separation in reverse-phase LC, increase MS sensitivity, and to facilitate structure analysis by MS/MS of O-carboxymethyl glucose and cellooligosaccharides. The cellulose selective enzymes that were investigated displayed interesting differences in enzyme selectivity on CMC substrates.
Asunto(s)
Carboximetilcelulosa de Sodio/metabolismo , Celulasa/metabolismo , Carboximetilcelulosa de Sodio/química , Cromatografía Liquida , Mezclas Complejas/análisis , Mezclas Complejas/química , Mezclas Complejas/metabolismo , Hidrólisis , Espectrometría de Masas , Estereoisomerismo , Especificidad por Sustrato , Espectrometría de Masas en Tándem , Trichoderma/enzimologíaRESUMEN
Two model sodium carboxymethyl celluloses (CMC) with similar monomer composition but with significant differences in the viscoelastic properties, that could not be assigned to variations in the average molar mass or molar mass distribution, were investigated with respect to the fraction of nonsubstituted cellulose segments in the polymers. The CMCs were hydrolyzed by a purified highly selective endoglucanase. The average molar mass and molar mass distribution of the enzyme products, as measured by size-exclusion chromatography with online multi-angle light scattering and refractive index detection (SEC/MALS/RI), revealed that the enzyme-catalyzed hydrolysis was more effective on one of the CMCs. To investigate whether this was due to a higher fraction of nonsubstituted cellulose segments in the polymer, the concentrations of nonsubstituted enzyme products, e.g., cellotetraose and cellopentaose, were measured by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS). It was concluded that the two CMCs displayed significant differences in the fraction of nonsubstituted cellulose segments. Furthermore, the CMC with the strongest attractive intermolecular interactions, according to rheometry, also contained the highest fraction of nonsubstituted cellulose segments.
Asunto(s)
Materiales Biocompatibles/química , Carboximetilcelulosa de Sodio/química , Celulasa/química , Química/métodos , Reología/métodos , Sodio/química , Celulosa/análogos & derivados , Celulosa/química , Elasticidad , Enzimas/química , Hidrólisis , Modelos Químicos , Peso Molecular , Oligosacáridos/química , Espectrometría de Masa por Láser de Matriz Asistida de Ionización Desorción/métodos , Tetrosas/química , Trichoderma/químicaRESUMEN
The distribution of substituents along the polymer backbone will have a strong influence on the properties of modified cellulose. Endoglucanases were used to degrade a series of hydroxypropyl cellulose (HPC) derivatives with a high degree of substitution. The HPCs were characterized with cloud-point analysis prior to degradation. The extent of enzymatic degradation was determined with size-exclusion chromatography with online multi-angle light scattering and refractive index detection and also with high-pH anion exchange chromatography with pulsed amperometric detection. To further characterize the formed products, matrix-assisted laser desorption/ionization time-of-flight mass spectrometry was employed for analysis of short-chained oligosaccharides. The different endoglucanases showed varying degradation capability depending on structure of the active site. The highly substituted HPCs had different susceptibility to degradation by the endoglucanases. The results show a difference in substituent distribution between HPCs, which would explain the differing cloud-point behaviors. Increased number of regions with low substitution could be correlated with lower polymer cloud point. The study shows the usefulness of enzymatic degradation to study the distribution of substituents in soluble biopolymer derivates.
Asunto(s)
Proteínas Bacterianas/metabolismo , Celulasa/metabolismo , Celulosa/análogos & derivados , Celulosa/química , Celulosa/metabolismo , Glucosa/química , Glucosa/metabolismo , Peso Molecular , Espectrometría de Masa por Láser de Matriz Asistida de Ionización DesorciónRESUMEN
Oligosaccharides of hydroxypropylmethyl cellulose, hydroxypropyl cellulose, and methyl cellulose were investigated by matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS). The cellulose ether oligosaccharides were produced either by enzymatic depolymerization utilizing the purified family 5 endoglucanase from Bacillus agaradhaerens or by partial acidic depolymerization. To lower the limit of detection in MALDI-MS three dilakylamines, dimethyl-, diethyl-, and dipropylamine were studied as reagents for reductive amination of the oligosaccharides. All three amines contributed to a significant increase in sensitivity in MALDI-MS, especially for oligosaccharides with a degree of polymerization (DP) < 3. These reagents were also attractive due to their high volatility, which facilitated the purification of the reaction mixtures. It was established that low-mass discrimination in MALDI-MS in the DP range 1-7 was substantially reduced with dialkylamine derivatization. Hence, dialkylamine derivatization of cellulose ether oligosaccharides obtained by endoglucanase depolymerization increased the number of detected analyte components. Dimethylamine was concluded to be the preferred reagent of those evaluated.
Asunto(s)
Aminas/química , Celulosa/química , Celulosa/aislamiento & purificación , Polímeros/química , Bacillus/metabolismo , Materiales Biocompatibles/química , Carbohidratos/química , Cromatografía , Éteres , Espectrometría de Masas , Oligosacáridos/química , Espectrometría de Masa por Láser de Matriz Asistida de Ionización DesorciónRESUMEN
Microchip immobilized enzyme reactors (microIMERs) with immobilized endoglucanases were applied for the hydrolysis of methyl cellulose (MC). MCs of various molecular weights were hydrolyzed using two microIMERs containing immobilized celloendoglucanase Cel 5A from Bacillus agaradhaerens (BaCel 5A) connected in series. Hydrolysis by the microIMER could be confirmed from the average molar masses and molar mass distributions measured by size exclusion chromatography (SEC) with online multiangle light scattering and refractive index detection. Methylated cellooligosaccharides with degrees of polymerization (DP) between 1 and 6 formed during hydrolysis were analyzed by direct infusion electrospray ionization ion-trap mass spectrometry (ESI-ITMS). Mass spectra of microIMER- and batch-hydrolyzed samples were compared and no significant differences were found, indicating that microIMER hydrolysis was as efficient as conventional batch hydrolysis. A fast and automated hydrolysis with online MS detection was achieved by connecting the microIMER to high-performance liquid chromatography and ESI-ITMS. This online separation reduced the relative intensities of interfering signals and increased the signal-to-noise ratios in MS. The microIMER hydrolysates were also subjected to SEC interfaced with matrix-assisted laser desorption/ionization time-of-flight mass spectrometry. With this technique, oligomers with DP 3-30 could be detected. The hydrolysis by the microIMER was performed within 60 min, i.e. significantly faster compared with batch hydrolysis usually performed for at least 24 h. The microIMER also allowed hydrolysis after 10 days of continuous use. The method presented in this work offers new approaches for the analysis of derivatized cellulose and provides the possibility of convenient online, fast, and more versatile analysis compared with the traditional batch method.
Asunto(s)
Celulasa/metabolismo , Enzimas Inmovilizadas , Metilcelulosa/metabolismo , Procedimientos Analíticos en Microchip , Bacillus/enzimología , Celulasa/aislamiento & purificación , Cromatografía en Gel , Cromatografía Líquida de Alta Presión , Hidrólisis , Metilcelulosa/química , Peso Molecular , Espectrometría de Masa por Láser de Matriz Asistida de Ionización Desorción , Factores de TiempoRESUMEN
Structure analysis of partially depolymerized methyl cellulose was performed by nanoelectrospray ionization tandem mass spectrometry (nano-ESI-MS/MS) and by matrix-assisted laser desorption/ionization tandem mass spectrometry (MALDI-MS/MS). Dimethylamine (DMA) was used for the first time as a reducing end derivatization reagent for oligosaccharides. This is an attractive reagent since it could be easily removed from the reaction mixture. Most important it also introduces a basic functional group that increased the sensitivity in both MALDI and nano-ESI. Depolymerization was made in two ways: one by the cellulose selective endoglucanase 5A from Bacillus agaradhaerens (Ba Cel5A) and the other by trifluoroacetic acid. The DMA derivatives formed both protonated and sodiated molecules in nano-ESI and MALDI. Tandem MS of protonated molecules yielded predominantly Y fragments from which the distribution of the substituents in the oligomers could be measured. Fragments obtained in tandem MS of sodiated molecules provided information regarding the positions of the substituents within the anhydroglucose units (AGUs). It was found that Ba Cel5A could cleave glucosidic bonds also if the AGU on the reducing side of the bond was fully methylated. The combination of DMA derivatization and tandem MS was demonstrated as a tool for the characterization of endoglucanase selectivity.
Asunto(s)
Dimetilaminas/química , Metilcelulosa/química , Espectrometría de Masas en Tándem/métodos , Celulasa/química , Celulasa/metabolismo , Metilcelulosa/metabolismo , Espectrometría de Masa por Ionización de Electrospray , Espectrometría de Masa por Láser de Matriz Asistida de Ionización Desorción , Ácido Trifluoroacético/químicaRESUMEN
Continuous spray deposition (CSD) of aqueous solutions of partially depolymerised methyl cellulose was found to improve matrix-assisted laser desorption/ionisation (MALDI) sample preparation. One feature was that the sensitivity in MALDI time-of-flight mass spectrometry increased up to an order of magnitude compared with the standard sample preparation method. Another feature was that CSD provided targets for MALDI with homogeneously distributed analyte. This resulted in a more even signal intensity and a higher reproducibility than in the standard method. High-mass discrimination was more pronounced in CSD than in the standard method. Size-exclusion chromatography with aqueous eluent was coupled online to CSD onto matrix-precoated foils. The suitability for determination of the molar mass distribution of methyl cellulose was investigated.
Asunto(s)
Cromatografía en Gel/métodos , Cromatografía Líquida de Alta Presión/métodos , Metilcelulosa/química , Espectrometría de Masa por Láser de Matriz Asistida de Ionización Desorción/métodos , Biopolímeros/análisis , Biopolímeros/química , Espectrometría de Masa por Láser de Matriz Asistida de Ionización Desorción/instrumentaciónRESUMEN
Ethylhydroxyethyl cellulose (EHEC) of three different viscosity classes (EHEC I, II, and III) was analyzed by programmed cross-flow asymmetrical flow field-flow fractionation coupled to multiangle light scattering and refractive index detectors to determine their size and molar mass distribution. Two size populations were detected in the two lower viscosity classes, EHEC I and II, one high molar mass and one ultrahigh molar mass (UHM). The two covered molar masses from 10(4) up to 10(9) g X mol(-1). The highest viscosity class EHEC III was less size-dispersed covering molar masses from 5 x 10(5) to 5 x 10(7) g.mol(-1). Filtering of the EHEC II solution removed small amounts of compact UHM material. Enzyme treatments were performed on EHEC II to further characterize it. Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry and anion ion-exchange chromatography coupled to pulsed amperometric detection showed that the UHM component contained EHEC.
Asunto(s)
Celulosa/análogos & derivados , Celulosa/química , Conformación Molecular , Peso Molecular , Espectrometría de Masa por Láser de Matriz Asistida de Ionización Desorción , ViscosidadRESUMEN
The distribution of substituents along the polymer chain in cationic potato amylopectin starch, modified in solution, granular slurry, or dry state, was investigated. The starch derivatives were successively hydrolyzed by different enzymes, followed by characterization of the hydrolysis products obtained by means of electrospray mass spectrometry (ESI-MS) and matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS). ESI-MS and MALDI-MS were proved to be appropriate techniques for identification of the substituted hydrolysis products, for which there are no standard compounds available. No highly substituted oligomers were found in the hydrolysates, which was taken as an indication of a more or less homogeneous distribution of cationic groups in the amylopectin molecules. Furthermore, from the results obtained it was suggested that the enzymes cleave glucosidic linkages only between unsubstituted glucose units and, preferentially, linkages in sequences containing more than two adjacent unsubstituted units. The determination of the amount of unsubstituted glucose produced from every successive hydrolysis step revealed slight differences between the different starch samples with respect to the homogeneity of the substitution pattern. Among the three samples under investigation, starch cationized in solution was found to have the most and dry-cationized starch the least homogeneous distribution of substituents.
Asunto(s)
Amilopectina/análisis , Solanum tuberosum/enzimología , Amilopectina/metabolismo , Cationes , Hidrólisis , Espectrometría de Masa por Ionización de Electrospray/métodosRESUMEN
Sample preparation effects in matrix-assisted laser desorption/ionisation time-of-flight mass spectrometry (MALDI-TOFMS) of partially depolymerised carboxymethyl cellulose (CMC) have been investigated. The depolymerisation was either enzymatic or acidic. Fractions of enzymatically depolymerised CMC were collected from size-exclusion chromatography (SEC) and further investigated by MALDI-TOFMS. 2,5-Dihydroxybenzoic acid was used as matrix, dissolved in H(2)O due to the poor solubility of CMC in suitable organic solvents. The samples were dried by two methods, in ambient atmosphere and at reduced pressure. Under reduced pressure the sample spot homogeneity increased. This drying method, however, produced additional adduct peaks in the mass spectra originating from ion exchange on the CMC oligomers. Analysis of CMC could be performed in both negative and positive ion modes. Mass discrimination and variation in ionisation efficiency were demonstrated by comparing mass spectra with SEC data. Measurements of the degree of substitution (DS) were performed on three CMCs with different DS values, which were depolymerised in trifluoroacetic acid. The three CMCs were easily distinguished from one another, but the obtained DS values deviated from the values supplied by the manufacturer.
Asunto(s)
Carboximetilcelulosa de Sodio/química , Carboximetilcelulosa de Sodio/metabolismo , Espectrometría de Masa por Láser de Matriz Asistida de Ionización Desorción/métodos , Artefactos , Biopolímeros/análisis , Biopolímeros/química , Biopolímeros/metabolismo , Carboximetilcelulosa de Sodio/análisis , Concentración de Iones de HidrógenoRESUMEN
Methyl cellulose (MC) was partially depolymerised and the oligomers thus obtained were studied by matrix-assisted laser desorption/ionisation time-of-flight mass spectrometry (MALDI-TOFMS). The depolymerisation was either enzymatic or acidic. Fractions of enzymatically depolymerised MC were collected from size-exclusion chromatography and subjected to a sample preparation investigation. Several MALDI matrices and solvents were evaluated. The results showed that the solvent choice had a significant effect on the measured degree of substitution (DS). Aprotic solvents produced higher DS values, which was most likely due to poor solubility of species with low DS. The obtained signal intensity, however, did not correlate with the solubility but seemed to be more dependent on certain matrix/solvent combinations. All the matrices attempted produced mass spectra with sufficient signal intensity for accurate peak area calculation. The choice of matrix did not have any significant effect on the measured DS. Sample spots obtained from organic solvents had a more homogeneous distribution of the analyte and smaller crystals than those obtained from water. This increased both the reproducibility and peak resolution and in addition the analysis time was shorter. DS measurements were performed on two acidically depolymerised MCs with different nominal DS values. It was easy to distinguish between the two MCs, and the measured DS values agreed well with the values supplied by the manufacturers.
Asunto(s)
Metilcelulosa/química , Metilcelulosa/metabolismo , Espectrometría de Masa por Láser de Matriz Asistida de Ionización Desorción/métodos , Biopolímeros/análisis , Biopolímeros/química , Biopolímeros/metabolismo , Metilcelulosa/análisis , Solubilidad , SolventesRESUMEN
Enzymatic hydrolysis of carboxymethyl cellulose (CMC) has been studied with purified endoglucanases Hi Cel5A (EG II), Hi Cel7B (EG I), and Hi Cel45A (EG V) from Humicola insolens, and Tr Cel7B (EG I), Tr Cel12A (EG III), and Tr Cel45Acore (EG V) from Trichoderma reesei. The CMC, with a degree of substitution (DS) of 0.7, was hydrolyzed with a single enzyme until no further hydrolysis was observed. The hydrolysates were analyzed for production of substituted and non-substituted oligosaccharides with size exclusion chromatography (SEC) and with matrix-assisted laser desorption/ionization mass spectrometry (MALDI-TOF-MS). Production of reducing ends and of nonsubstituted oligosaccharides was determined as well. The two most effective endoglucanases for CMC hydrolysis were Hi Cel5A and Tr Cel7B. These enzymes degraded CMC to lower molar mass fragments compared with the other endoglucanases. The products had the highest DS determined by MALDI-TOF-MS. Thus, Hi Cel5A and Tr Cel7B were less inhibited by the substituents than the other endoglucanases. The endoglucanase with clearly the lowest activity on CMC was Tr Cel45Acore. It produced less than half of the amount of reducing ends compared to Tr Cel7B; furthermore, the products had significantly lower DS. By MALDI-TOF-MS, oligosaccharides with different degree of polymerization (DP) and with different number of substituents could be separated and identified. The average oligosaccharide DS as function of DP could be measured for each enzyme after hydrolysis. The combination of techniques for analysis of product formation gave information on average length of unsubstituted blocks of CMC.