RESUMEN

This study addresses the critical need for efficient and recyclable photocatalysts for water treatment applications by presenting a novel approach for the synthesis and characterization of copper (I) oxide (Cu2O) nanoparticles modified with ascorbic acid (Cu2O/AA). The motivation for this research stems from the increasing concern about environmental pollution caused by organic pollutants, such as Brilliant Cresyl Blue (BCB), and the necessity for sustainable solutions to mitigate this issue. Through comprehensive characterization techniques including Ultraviolet-Visible spectroscopy (UV-Vis), Fourier Transform Infrared spectroscopy (FTIR), X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), zeta potential measurements, and Brunauer-Emmett-Teller (BET) analysis, we demonstrate a significant modification to the electronic structure, enhancing the photocatalytic activity of Cu2O/AA. BET analysis revealed a mesoporous structure with a specific surface area of 2.7247 m2/g for Cu2O/AA, further emphasizing its potential for enhanced catalytic performance. The photocatalytic degradation studies showcased remarkable efficiency improvements, with degradation coefficients of 30.8% and 73.12% for Cu2O NPs and Cu2O/AA NC, respectively, within a 120 min timeframe. Additionally, recyclability experiments indicated sustained efficiency over five consecutive cycles, with both catalysts retaining crystalline integrity. These findings underscore the promising potential of Cu2O/AA nanoparticles as highly efficient and recyclable photocatalysts for the degradation of organic pollutants, offering superior performance compared to pure Cu2O NPs and addressing the pressing need for sustainable water treatment solutions.

RESUMEN

A significant waste (e.g., high oil content and pollutants such as heavy metals, dyes, and microbial contaminants) in water is generated during crude oil extraction and industrial processes, which poses environmental challenges. This study explores the potential of Ag@Fe3O4 nanocomposite (NC) biosynthesized using the aqueous leaf extract of Laurus nobilis for the treatment of oily wastewater. The NC was characterized using ultraviolet-visible (UV-Vis) spectrophotometry, Scanning Electron Microscopy (SEM), Fourier Transformed Infrared (FTIR) and X-Ray Diffraction (XRD) spectroscopies. The crystalline structure of the NC was determined to be face-centered cubic with an average size of 42 nm. Ag@Fe3O4 NC exhibited significant degradation (96.8%, 90.1%, and 93.8%) of Rose Bengal (RB), Methylene Blue (MB), and Toluidine Blue (TB), respectively, through a reduction reaction lasting 120 min at a dye concentration of 10 mg/L. The observed reaction kinetics followed a pseudo-first-order model, with rate constants (k-values) of 0.0284 min-1, 0.0189 min-1, and 0.0212 min-1 for RB, MB, and TB, respectively. The fast degradation rate can be attributed to the low band gap (1.9 eV) of Ag@Fe3O4 NC. The NC elicited an impressive effectiveness (99-100%, 98.0%, and 91.8% within 30 min) in removing, under sunlight irradiation, several heavy metals, total petroleum hydrocarbons (TPH), and total suspended solids (TSS) from the oily water samples. Furthermore, Ag@Fe3O4 NC displayed potent antibacterial properties and a good biocompatibility. These findings contribute to the development of efficient and cost-effective methods for wastewater treatment and environmental remediation.

Asunto(s)

RESUMEN

Copper oxide nanoparticles (CuO NPs) and CuO NPs decorated with hematite (Fe2O3) nanocomposites (CuO@Fe2O3NC) were biosynthesized by a green method usingPortulaca oleracealeaves extract. The NC were characterized using various techniques, including x-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, energy-dispersive x-ray spectroscopy, and UV-vis spectroscopy. The results showed that the synthesized CuO and CuO@Fe2O3NC were crystalline with a monoclinic crystal structure and contained functional groups responsible for catalytic activity. The size of the nanocomposites ranged from 39.5 to 45.9 nm, and they exhibited a variety of agglomerated or aggregated shapes. The CuO@Fe2O3NC showed improved photocatalytic activity for the degradation of antibiotics in water and wastewater and promising antiviral activity against SARS-CoV-2, indicating its potential for use in disinfection applications. The study investigated the impact of irradiation time on the photocatalytic degradation of Amoxicillin and found that increasing the irradiation time led to a higher degradation rate. The band gap energy (Eg) for pure CuO NPs was around 2.4 eV and dropped to 1.6 eV with CuO@Fe2O3NC. In summary, the CuO@Fe2O3NC has the potential to be an efficient photocatalyst and promising antiviral agent for environmental remediation. The CuO@Fe2O3nanocomposites have been found to possess a high degree of efficacy in inactivating SARS-CoV-2 infectivity. The results of the study indicate that the nanocomposites exhibit potent anti-viral properties and hold significant potential for use in mitigating the spread of the virus.

Asunto(s)

RESUMEN

Considered heavy metals, such as As(III), Bi(II), Cd(II), Cr(VI), Mn(II), Mo(II), Ni(II), Pb(II), Sb(III), Se(-II), Zn(II), and contaminating chemical compounds (monocyclic aromatic hydrocarbons such as phenolic or polycyclic derivatives) in wastewater (petrochemical industries: oil and gas production plants) are currently a major concern in environmental toxicology due to their toxic effects on aquatic and terrestrial life. In order to maintain biodiversity, hydrosphere ecosystems, and people, it is crucial to remove these heavy metals and polluting chemical compounds from the watery environment. In this study, different Nanoparticles (α-Fe2O3, CuO, and ZnO) were synthesized by green synthesis method using Portulaca oleracea leaf extract and characterized by UV-Vis spectrophotometers, FTIR spectroscopy, X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM), Energy Dispersive Spectroscopy (EDS) techniques in order to investigate morphology, composition, and crystalline structure of NPs, these were then used as adsorbent for the removal of As(III), Bi(II), Cd(II), Cr(VI), Mn(II), Mo(II), Ni(II), Pb(II), Sb(III), Se(-II), and Zn(II) from wastewater, and removal efficiencies of were obtained 100% under optimal conditions.

RESUMEN

The novel synthesis of MgO from Laurus nobilis L. leaves was prepared using the green synthesis method. It is using direct blending process to decorate MgO/PEG nanocomposite to enhance the photodegradation properties and examine its physical properties using diverse characterization techniques, including XRD, FTIR, SEM, EDX, and UV-Vis. X-ray diffraction reveals a cubic phase of MgO with a 37-nm grain size. SEM images confirm spherical nanoparticles with a diameter size of 22.9 nm. The optical energy gap of MgO NPs was 4.4 eV, and the MgO/PEG nanocomposite was 4.1 eV, which made it an efficient catalyst under sunlight. The photocatalytic activity of Rose Bengal (RB) and Toluidine Blue (TB) dyes at 5 × 10-5 mol/l dye concentration indicates excellent degradation efficiencies of 98% and 95% in 120 min, respectively, under sunlight irradiation. MgO/PEG is an excellent candidate nanocomposite for applications of photodegradation and could be used for its potential capability to develop conventionally used techniques.

Asunto(s)