RESUMEN

From a circular economy perspective, the appropriate management and valorization of winery wastes and by-products are crucial for sustainable development. Nowadays, grape pomace (GP) has attracted increasing interest within the food field due to its valuable content, comprising nutritional and bioactive compounds (e.g., polyphenols, organic and fatty acids, vitamins, etc.). Particularly, GP polyphenols have been recognized as exhibiting technological and health-promoting effects in different food and biological systems. Hence, GP valorization is a step toward offering new functional foods and contributing to solving waste management problems in the wine industry. On this basis, the use of GP as a food additive/ingredient in the development of novel products with technological and functional advantages has recently been proposed. In this review, we summarize the current knowledge on the bioactivity and health-promoting effects of polyphenolic-rich extracts from GP samples. Advances in GP incorporation into food formulations (enhancement of physicochemical, sensory, and nutritional quality) and information supporting the intellectual property related to GP potential applications in the food industry are also discussed.

RESUMEN

Polyphenols called procyanidins can be extracted from agro-industrial waste like litchi peel and coffee pulp. However, their efficacy is limited due to instability, which hinders both the bioavailability and preservation of their activity. This study aims to establish the ideal encapsulation conditions required to preserve the procyanidin properties found in extracts taken from litchi peel and coffee pulp. To attain the maximum procyanidin encapsulation efficacy (EE), the Taguchi method was utilized to streamline the spray-drying conditions for different wall materials-maltodextrin (MD), whey protein (WP), citrus pectin (CP), and skim milk (SM). The optimized conditions consisted of feed flow (3, 4.5, and 6 mL/min), temperature (125, 150, and 175 °C), and airflow (30, 35, and 40 m3/h). The microcapsules were characterized using ABTS, DPPH, lipoperoxidation, and scanning electron microscopy. Objective evaluations revealed that MD was the most effective encapsulation material for the litchi extract, whereas WP was the optimal option for the coffee extract. Of all the factors considered in the spray-drying process, feed flow had the strongest impact. The spray-drying process for the litchi peel extracts achieved high procyanidin encapsulation efficiencies at a feed flow rate of 4.5 mL/min, a temperature of 150 °C, and an airflow rate of 35 m3/h. Meanwhile, the coffee extract spray drying achieved similar results at a feed flow rate of 4.5 mL/min, a temperature of 175 °C, and an airflow rate of 40 m3/h. Encapsulation efficiencies of 98.1% and 93.6% were observed for the litchi and coffee extracts, respectively, under the mentioned optimal conditions. The microencapsulation process was successful in preserving the antioxidant properties of procyanidins. The microcapsules' size ranged from 2.6 to 3.2 micrometers. The results imply that the phenolic compounds present in the extracts function as effective antioxidant agents.

RESUMEN

The objective of the present work was to optimize the microencapsulation conditions of neem (Azadirachta indica A. Juss) leaf extracts for the biocontrol of Tenebrio molitor. The complex coacervation method was used for the encapsulation of the extracts. The independent factors considered were the pH (3, 6, and 9), pectin (4, 6, and 8% w/v), and whey protein isolate (WPI) (0.50, 0.75, and 1.00% w/v). The Taguchi L9 (33) orthogonal array was used as the experimental matrix. The response variable was the mortality of T. molitor after 48 h. The nine treatments were applied by immersion of the insects for 10 s. The statistical analysis revealed that the most influential factor on the microencapsulation was the pH (73% of influence), followed by the pectin and WPI (15% and 7% influence, respectively). The software predicted that the optimal microencapsulation conditions were pH 3, pectin 6% w/v, and WPI 1% w/v. The signal-to-noise (S/N) ratio was predicted as 21.57. The experimental validation of the optimal conditions allowed us to obtain an S/N ratio of 18.54, equivalent to a T. molitor mortality of 85 ± 10.49%. The microcapsules had a diameter ranging from 1-5 µm. The microencapsulation by complex coacervation of neem leaf extract is an alternative for the preservation of insecticidal compounds extracted from neem leaves.

RESUMEN

The present work describes the purification of an enzyme capable of degrading punicalagin. The enzyme was produced by Aspergillus niger GH1 by solid-state fermentation, and the enzyme production was induced by using ellagitannins as the sole carbon source. The purification steps included the concentration by lyophilization, desalting, anionic exchange, and gel filtration chromatography. The enzyme kinetic constants were calculated by using punicalagin, methyl gallate, and sugar beet arabinans. The molecular mass of the protein was estimated by SDS-PAGE. The identified bands were excised and digested using trypsin, and the peptides were submitted to HPLC-MS/MS analysis. The docking analysis was conducted, and a 3D model was created. The purification fold increases 75 times compared with the cell-free extract. The obtained Km values were 0.053 mM, 0.53% and 6.66 mM for punicalagin, sugar beet arabinans and methyl gallate, respectively. The optimal pH and temperature for the reaction were 5 and 40 °C, respectively. The SDS-PAGE and native PAGE analysis revealed the presence of two bands identified as α-l-arabinofuranosidase. Both enzymes were capable of degrading punicalagin and releasing ellagic acid.

RESUMEN

Fungal secondary metabolites with antimicrobial properties are used for biological pest control. Their production is influenced by several factors as environment, host, and culture conditions. In the present work, the secondary metabolites from fermented extracts of Beauveria bassiana PQ2 were tested as antifungal agents against Gibberella moniliformis LIA. The L18 (21 × 37) orthogonal array from Taguchi methodology was used to assess 8 parameters (pH, agitation, sucrose, yeast extract, KH2PO4, MgSO4, NH4NO3, and CaCl2) in B. bassiana PQ2 submerged fermentation. The ability of the fermented extracts to slow down the growth rate of G. moniliformis LIA was evaluated. The results from 18 trials were analyzed by Statistica 7 software by evaluating the signal-to-noise ratio (S/N) to find the lower-the-better condition. Optimal culture conditions were pH, 5; agitation, 250 rpm; sucrose, 37.5 g/L-1; yeast extract, 10 g/L-1; KH2PO4, 0.8 g/L-1; MgSO4, 1.2 g/L-1; NH4NO3, 0.1 g/L-1; and CaCl2, 0.4 g/L-1, being the agitation at the highest level the most significant factor. The optimal conditions were validated in a sparged bottle bioreactor resulting in a higher S/N value (12.48) compared to the estimate. The extract obtained has the capacity to inhibit the germination of G. moniliformis spores at 24 h. HPLC-ESI-MS2 allowed to identify the water-soluble red pigment as oosporein (m/z 304.9). The secondary metabolites from B. bassiana PQ2 are a suitable alternative to control the growth and sporulation of G. moniliformis.

Asunto(s)

RESUMEN

Fructosyltransferase (FTase) catalyzes the transfer of a fructosyl group to a sucrose molecule or a fructooligosaccharide (FOS) when a FOS with a longer chain is formed. Production of FTase by two Aspergillus species and its mixture was exploited using solid-state fermentation (SSF) and employing agave sap as substrate. The maximum FTase activity (1.59 U/mL) by Aspergillus oryzae was obtained after 24 h, using a temperature of 30 °C, with an inoculum of 2 × 107 spores/mL. The nucleotide sequence coding for the fructosyltransferase showed 1494 bp and encodes for a protein of 498 amino acids. The hypothetical molecular tertiary structure of Aspergillus oryzae BM-DIA FTase showed the presence of structural domains, such as a five-bladed beta-propeller domain characteristic of GH (glycoside hydrolase) and C terminal, which forms a beta-sandwich module. This study contributes to the knowledge of stability, compatibility, and genetic expression of Aspergillus oryzae BM-DIA under SSF bioprocess conditions for industrial production of fructosyltransferase.

Asunto(s)