RESUMEN

In most developing countries, municipal sewage sludge end-use practices appear unsustainable; rather, it poses environmental concerns. This study examined the potential of vermicomposting of municipal sewage sludge and its blend with other biowaste for agricultural application. Using a response surface methodology and the Box-Behnken design in Design Expert Software (Version 10.0.7), the current study optimized the moisture content (60-90%), turning frequency (1-3 turnings/week), and substrate mixing ratios (50:50 to 80:20 wt.%) to maximize the content of nitrogen, phosphorus, and potassium. As a result, an optimal moisture content (72%), substrate mixing ratio (72.34:27.6 wt.%), and turning frequency (2 per week), producing a promising-quality vermicompost with a maximum yield of nitrogen (2.76%), phosphorus (1.80%), and potassium (1.88%) is achieved. Thus, vermicomposting can effectively turn the concerning municipal sewage sludge into useful agricultural input for its sustainable management.

Asunto(s)

Oligoquetos , Aguas del Alcantarillado , Animales , Aguas del Alcantarillado/química , Suelo , Oligoquetos/fisiología , Potasio , Fósforo/química , Nitrógeno/análisis

RESUMEN

This study attempted to investigate the adsorptive potential of blended bamboo (Oxytenanthera abyssinica) sawdust/rice husk (BSD/RH) at a ratio of 1:1 carbonized at 400 °C for the sorption of cadmium ions from synthetic solutions in batch mode. The Box-Behnken Design in response surface methodology (RSM) was used to achieve the best removal efficiency and adsorption capacity of the biochar. With a p-value of 0.0001, the initial Cd2+ concentration and adsorbent dose were discovered to be the most significant parameters controlling the adsorption capacity and removal efficiency of Cd2+ from the solution. At a pH of 8.95, ionic strength of 0.020 mol/L KNO3, a contact time of 15 min, an initial concentration of 200 mg/L, and an adsorbent dose of 0.5 g, the optimum Cd2+ removal and adsorption capacity of 99.97% and 358.65 mg/g, respectively, were obtained. The optimized conditions were later used to determine the removal efficiency and adsorption capacity of pristine biochars of rice husk and bamboo sawdust, which were found to be 79.8% and 83.7%, respectively. This finding indicates the potential for using biosorbent derived from blended feedstock materials to remove heavy metals such as cadmium.

---

Many studies investigated the pollutant removal potential of agricultural wastes as single feedstock adsorbent materials. The novel aspect of this study is that it examines their potentials on Cd²⁺ removal by combining two feedstocks (bamboo saw dust and rice husk) while optimizing the common influencing factors. Furthermore, a comparative analytical study was carried out between the blended feedstock biochar and their respective pristine ones. According to the findings, using blended biochar instead of pristine biochar results in a significant increase in Cd removal efficiency.

Asunto(s)

Oryza , Contaminantes Químicos del Agua , Cadmio , Contaminantes Químicos del Agua/análisis , Biodegradación Ambiental , Carbón Orgánico , Adsorción , Agua , Cinética

RESUMEN

Using small-scale batch tests, various researchers investigated the adsorptive removal of fluoride using low-cost clay minerals, such as Bentonite. In this study, Column adsorption studies were used to investigate the removal of fluoride from aqueous solution using acid-treated Bentonite (ATB). The effects of initial fluoride concentration, flow rates, and bed depth on fluoride removal efficiency (R) and adsorption capability (qe) in continuous settings were investigated, and the optimal operating condition was determined using central composite design (CCD). The model's suitability was determined by examining the relationship between experimental and expected response values. The analysis of variance was used to determine the importance of independent variables and their interactions. The optimal values were determined as the initial concentration of 5.51 mg/L, volumetric flow rate of 17.2 mL/min and adsorbent packed-bed depth of 8.88 cm, with % removal of 100, adsorptive capacity of 2.46 mg/g and desirability of 1.0. This output reveals that an acid activation of Bentonite has made the adsorbent successful for field application.