RESUMEN

Growing interest in the use of first-row transition metal complexes in a number of applied contexts-including but not limited to photoredox catalysis and solar energy conversion-underscores the need for a detailed understanding of their photophysical properties. A recent focus on ligand-field photocatalysis using cobalt(III) polypyridyls in particular has unlocked unprecedented excited-state reactivities. Photophysical studies on Co(III) chromophores in general are relatively uncommon, and so here we carry out a systematic study of a series of Co(III) polypyridyl complexes in order to delineate their excited-state dynamics. Compounds with varying ligand-field strengths were prepared and studied using variable-temperature ultrafast transient absorption spectroscopy. Analysis of the data establishes that the ground-state recovery dynamics are operating in the Marcus inverted region, in stark contrast to what is typically observed in other first-row metal complexes. The analysis has further revealed the underlying reasons driving this excited-state behaviour, thereby enabling potential advancements in the targeted use of the Marcus inverted region for a variety of photolytic applications.

RESUMEN

Transition metal-based charge-transfer complexes represent a broad class of inorganic compounds with diverse photochemical applications. Charge-transfer complexes based on earth-abundant elements have been of increasing interest, particularly the canonical [Fe(bpy)3]2+. Photoexcitation into the singlet metal-ligand charge transfer (1MLCT) state is followed by relaxation first to the ligand-field manifold and then to the ground state. While these dynamics have been well-studied, processes within the MLCT manifold that facilitate and/or compete with relaxation have been more elusive. We applied ultrafast two-dimensional electronic spectroscopy (2DES) to disentangle the dynamics immediately following MLCT excitation of this compound. First, dynamics ascribed to relaxation out of the initially formed 1MLCT state was found to correlate with the inertial response time of the solvent. Second, the additional dimension of the 2D spectra revealed a peak consistent with a ∼20 fs 1MLCT → 3MLCT intersystem crossing process. These two observations indicate that the complex simultaneously undergoes intersystem crossing and direct conversion to ligand-field state(s). Resolution of these parallel pathways in this prototypical earth-abundant complex highlights the ability of 2DES to deconvolve the otherwise obscured excited-state dynamics of charge-transfer complexes.

RESUMEN

Second- and third-row transition metal complexes are widely employed in photocatalysis, whereas earth-abundant first-row transition metals have found only limited use because of the prohibitively fast decay of their excited states. We report an unforeseen reactivity mode for productive photocatalysis that uses cobalt polypyridyl complexes as photocatalysts by exploiting Marcus inverted region behavior that couples increases in excited-state energies with increased excited-state lifetimes. These cobalt (III) complexes can engage in bimolecular reactivity by virtue of their strong redox potentials and sufficiently long excited-state lifetimes, catalyzing oxidative C(sp2)-N coupling of aryl amides with challenging sterically hindered aryl boronic acids. More generally, the results imply that chromophores can be designed to increase excited-state lifetimes while simultaneously increasing excited-state energies, providing a pathway for the use of relatively abundant metals as photoredox catalysts.

RESUMEN

Increasing interest in sustainable chemistry coupled with the quest to explore new reactivity has spurred research on first-row transition metal complexes for potential applications in a variety of settings. One of the more active areas of research is photoredox catalysis, where the synthetically tunable nature of their electronic structures provides a rich palette of options for tailoring their reactivity to a desired chemical transformation. Understanding the mechanism of excited-state reactivity is critical for the informed development of next-generation catalysts, which in turn requires information concerning the propensity of their electronic excited states to engage in the desired electron or energy transfer processes. Herein we provide direct evidence of the highly oxidizing nature of the lowest-energy ligand-field (LF) excited state of a first-row d6-low-spin Co(III) photosensitizer [Co(4,4'-Br2bpy)3]3+ (where 4,4'-Br2bpy is 4,4'-dibromo-2,2'-bipyridine). The redox potential associated with the LF excited state of the Co(III) complex was bracketed by performing bimolecular quenching studies by using a series of simple organic electron donors. Time-resolved absorption spectroscopy confirmed a dynamic quenching process attributed to reductive quenching of the lowest-energy ligand-field excited state of the Co(III) chromophore. Analysis of the Stern-Volmer plots for each chromophore-quencher pair revealed a limiting value of Ered* ∼ 1.25 V vs Fc/Fc+ for the metal-centered excited state, which is significantly stronger than that of more commonly employed transition metal-based photoredox agents such as [Ru(bpy)3]2+ (Ered* = 0.32 V vs Fc/Fc+) and [Ir(ppy)2(bpy)]+ (Ered* = 0.27 V vs Fc/Fc+). These results suggest that this class of chromophores could find utility in applications requiring the activation of oxidatively resistant organic substrates for photoredox catalysis.

Asunto(s)

RESUMEN

The question of whether one can use information from quantum coherence as a means of identifying vibrational degrees of freedom that are active along an excited-state reaction coordinate is discussed. Specifically, we are exploring the notion of whether quantum oscillations observed in single-wavelength kinetics data exhibiting coherence dephasing times that are intermediate between that expected for either pure electronic or pure vibrational dephasing are vibronic in nature and therefore may be coupled to electronic state-to-state evolution. In the case of a previously published Fe(II) polypyridyl complex, coherences observed subsequent to 1A1 → 1MLCT excitation were linked to large-amplitude motion of a portion of the ligand framework; dephasing times on the order of 200-300 fs suggested that these degrees of freedom could be associated with ultrafast (∼100 fs) conversion from the initially formed MLCT excited state to lower-energy, metal-centered ligand-field excited state(s) of the compound. Incorporation of an electronically benign but sterically restrictive Cu(I) ion into the superstructure designed to interfere with this motion yielded a compound exhibiting a ∼25-fold increase in the compound's MLCT lifetime, a result that was interpreted as confirmation of the initial hypothesis. However, new data acquired on a different chemical system - Cr(acac')3 (where acac' represents various derivatives of acetylacetonate) - yielded results that call into question this same hypothesis. Coherences observed subsequent to 4A2 → 4T2 ligand-field excitation on a series of molecules implicated similar vibrational degrees of freedom across the series, but exhibited dephasing times ranging from 340 fs to 2.5 ps without any clear correlation to the dynamics of excited-state evolution in the system. Taken together, the results obtained on both of these chemical platforms suggest that while identification of coherences can indeed point to degrees of freedom that should be considered as candidate modes for defining reaction trajectories, our understanding of the factors that determine the interplay across coherences, dephasing times, and electronic and geometric structure is insufficient at the present time to view this parameter as a robust metric for differentiating active versus spectator modes for ultrafast dynamics.

Asunto(s)

RESUMEN

A study of a series of six-coordinate Co(III) complexes has been carried out to quantify spectroscopic parameters for a range of ligands that are commonly employed to realize strong charge-transfer absorptions in low-spin, d6 systems. Identification of any three ligand-field transitions allows for the determination of the splitting parameter (10 Dq) as well as the Racah B and C parameters for a given compound. The data revealed a relatively small spread in the magnitude of 10 Dq, ranging from ca. 23 000 cm-1 in the case of [Co(pyrro-bpy)3]3+ (where pyrro-bpy is 4,4'-dipyrrolidinyl-2,2'-bipyridine) to ca. 26 000 cm-1 for [Co(terpy)2]3+ (where terpy is 2,2':6',2″-terpyridine). Significantly, trends across the series suggest that polypyridyl ligands behave as net π-donors when interacting with Co(III), in contrast to the net π-accepting character they exhibit when bound to second- and third-row metals. The influence of strong σ donation associated with carbene-based ligands was evident from the data acquired for [Co(BMeImPy)2]3+ (where BMeImPy is 3,3'-(pyridine-2,6-diyl)bis(1-methyl-1H-3-imidazolium)), where a 10 Dq value of ca. 30 000 cm-1 was determined. Spectroscopic data were also analyzed for [Fe(bpy)3]2+ using the results on [Co(bpy)3]3+ as a reference point. A value for 10 Dq of 21 000 cm-1 was estimated, indicating a reduction in the ligand-field strength of ca. 3000 cm-1 upon replacing Co(III) with Fe(II). We suggest that this approach of taking advantage of the blueshift of the charge-transfer feature in Co(III) complexes to reveal otherwise obscured ligand-field bands can be a useful tool for the development of new ligand systems to expand the photofunctionality of first-row transition-metal-based chromophores.

RESUMEN

The development of chromophores based on earth-abundant transition metals whose photophysical properties are dominated by their charge-transfer excited states has inspired considerable research over the past decade. One challenge associated with this effort is satisfying the dual requirements of a strong ligand field and chemical tunability of the compound's absorptive cross-section. Herein we explore one possible approach using a heteroleptic compositional motif that combines both of these attributes into a single compound. With the parent complex [Fe(phen)3]2+ (1; where phen is 1,10-phenanthroline) as the starting material, replacement of one of the phen ligands for two cyanides to obtain Fe(phen)2(CN)2 (2) allows for conversion to [Fe(phen)2(C4H10N4)]2+ (3), a six-coordinate Fe(II) complex whose coordination sphere consists of two chelating polypyridyl ligands and one bidentate carbene-based donor. Ground-state absorption spectra of all three compounds exhibit 1A1 → 1MLCT transition(s) associated with the phen ligands that are relatively insensitive to the identity of the third counterligand(s). Ultrafast time-resolved electronic absorption measurements revealed lifetimes for the MLCT excited states of compounds 1 and 2 of 180 ± 30 and 250 ± 90 fs, respectively, values that are typical for iron(II)-based polypyridyl complexes. The corresponding kinetics for compound 3 were substantially slower at 7.4 ± 0.9 ps; the spectral evolution associated with these dynamics confirms that these kinetics are tracking the MLCT excited state and, more importantly, are coupled to ground-state recovery from this excited state. The data are interpreted in terms of a modulation of the relative energies of the MLCT and ligand-field states across the series, leading to a systematic destabilization of metal-localized ligand-field excited states such that the low-energy portions of the charge-transfer and ligand-field manifolds are at or near an energetic inversion point in compound 3. We believe these results illustrate the potential for a modular, orthogonal approach to chromophore design in which part of the coordination sphere can be targeted for light absorption while another can be used to tune electronic-state energetics.

RESUMEN

Ruthenium(II) polypyridyl complexes [Ru(CN-Me-bpy)x(bpy)3-x]2+ (CN-Me-bpy = 4,4'-dicyano-5,5'-dimethyl-2,2'-bipyridine, bpy = 2,2'-bipyridine, and x = 1-3, abbreviated as 12+, 22+, and 32+) undergo four (12+) or five (22+ and 32+) successive one-electron reduction steps between -1.3 and -2.75 V versus ferrocenium/ferrocene (Fc+/Fc) in tetrahydrofuran. The CN-Me-bpy ligands are reduced first, with successive one-electron reductions in 22+ and 32+ being separated by 150-210 mV; reduction of the unsubstituted bpy ligand in 12+ and 22+ occurs only when all CN-Me-bpy ligands have been converted to their radical anions. Absorption spectra of the first three reduction products of each complex were measured across the UV, visible, near-IR (NIR), and mid-IR regions and interpreted with the help of density functional theory calculations. Reduction of the CN-Me-bpy ligand shifts the ν(C≡N) IR band by ca. -45 cm-1, enhances its intensity ∼35 times, and splits the symmetrical and antisymmetrical modes. Semireduced complexes containing two and three CN-derivatized ligands 2+, 3+, and 30 show distinct ν(C≡N) features due to the presence of both CN-Me-bpy and CN-Me-bpy•-, confirming that each reduction is localized on a single ligand. NIR spectra of 10, 1-, and 2- exhibit a prominent band attributable to the CN-Me-bpy•- moiety between 6000 and 7500 cm-1, whereas bpy•--based absorption occurs between 4500 and 6000 cm-1; complexes 2+, 3+, and 30 also exhibit a band at ca. 3300 cm-1 due to a CN-Me-bpy•- → CN-Me-bpy interligand charge-transfer transition. In the UV-vis region, the decrease of π → π* intraligand bands of the neutral ligands and the emergence of the corresponding bands of the radical anions are most diagnostic. The first reduction product of 12+ is spectroscopically similar to the lowest triplet metal-to-ligand charge-transfer excited state, which shows pronounced NIR absorption, and its ν(C≡N) IR band is shifted by -38 cm-1 and 5-7-fold-enhanced relative to the ground state.

RESUMEN

It is common practice for data providers to include text descriptions for each column when publishing datasets in the form of data dictionaries. While these documents are useful in helping an end-user properly interpret the meaning of a column in a dataset, existing data dictionaries typically are not machine-readable and do not follow a common specification standard. We introduce the Semantic Data Dictionary, a specification that formalizes the assignment of a semantic representation of data, enabling standardization and harmonization across diverse datasets. In this paper, we present our Semantic Data Dictionary work in the context of our work with biomedical data; however, the approach can and has been used in a wide range of domains. The rendition of data in this form helps promote improved discovery, interoperability, reuse, traceability, and reproducibility. We present the associated research and describe how the Semantic Data Dictionary can help address existing limitations in the related literature. We discuss our approach, present an example by annotating portions of the publicly available National Health and Nutrition Examination Survey dataset, present modeling challenges, and describe the use of this approach in sponsored research, including our work on a large NIH-funded exposure and health data portal and in the RPI-IBM collaborative Health Empowerment by Analytics, Learning, and Semantics project. We evaluate this work in comparison with traditional data dictionaries, mapping languages, and data integration tools.

RESUMEN

Photoredox catalysis employing ruthenium- and iridium-based chromophores have been the subject of considerable research. However, the natural abundance of these elements are among the lowest on the periodic table, a fact that has led to an interest in developing chromophores based on earth-abundant transition metals that can perform the same function. There have been reports of using FeII-based polypyridyl complexes as photocatalysts, but there is limited mechanistic information pertaining to the nature of their reactivity in the context of photoredox chemistry. Herein, we report the results of bimolecular quenching studies between [Fe(tren(py)3)]2+ (where tren(py)3 = tris(2-pyridyl-methylimino-ethyl)amine) and a series of benzoquinoid acceptors. The data provide direct evidence of electron transfer involving the lowest-energy ligand-field excited state of the Fe(II)-based photosensitizer, definitively establishing that Fe(II) polypyridyl complexes can engage in photoinduced redox reactions but by a mechanism that is fundamentally different than the MLCT-based chemistry endemic to their second- and third-row congeners.

RESUMEN

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

RESUMEN

Design-specific control over excited-state dynamics is necessary for any application seeking to convert light into chemical potential. Such control is especially desirable in iron(II)-based chromophores, which are an Earth-abundant option for a wide range of photo-induced electron-transfer applications including solar energy conversion1 and catalysis2. However, the sub-200-femtosecond lifetimes of the redox-active metal-to-ligand charge transfer (MLCT) excited states typically encountered in these compounds have largely precluded their widespread use3. Here we show that the MLCT lifetime of an iron(II) complex can be manipulated using information from excited-state quantum coherences as a guide to implementing synthetic modifications that can disrupt the reaction coordinate associated with MLCT decay. We developed a structurally tunable molecular platform in which vibronic coherences-that is, coherences reflecting a coupling of vibrational and electronic degrees of freedom-were observed in ultrafast time-resolved absorption measurements after MLCT excitation of the molecule. Following visualization of the vibrational modes associated with these coherences, we synthetically modified an iron(II) chromophore to interfere with these specific atomic motions. The redesigned compound exhibits a MLCT lifetime that is more than a factor of 20 longer than that of the parent compound, indicating that the structural modification at least partially decoupled these degrees of freedom from the population dynamics associated with the electronic-state evolution of the system. These results demonstrate that using excited-state coherence data may be used to tailor ultrafast excited-state dynamics through targeted synthetic design.

RESUMEN

When healthcare providers review the results of a clinical trial study to understand its applicability to their practice, they typically analyze how well the characteristics of the study cohort correspond to those of the patients they see. We have previously created a study cohort ontology to standardize this information and make it accessible for knowledge-based decision support. The extraction of this information from research publications is challenging, however, given the wide variance in reporting cohort characteristics in a tabular representation. To address this issue, we have developed an ontology-enabled knowledge extraction pipeline for automatically constructing knowledge graphs from the cohort characteristics found in PDF-formatted research papers. We evaluated our approach using a training and test set of 41 research publications and found an overall accuracy of 83.3% in correctly assembling the knowledge graphs. Our research provides a promising approach for extracting knowledge more broadly from tabular information in research publications.

Asunto(s)

RESUMEN

In condensed phase chemistry, the solvent can have a significant impact on everything from yield to product distribution to mechanism. With regard to photo-induced processes, solvent effects have been well-documented for charge-transfer states wherein the redistribution of charge subsequent to light absorption couples intramolecular dynamics to the local environment of the chromophore. Ligand-field excited states are expected to be largely insensitive to such perturbations given that their electronic rearrangements are localized on the metal center and are therefore insulated from so-called outer-sphere effects by the ligands themselves. In contrast to this expectation, we document herein a nearly two-fold variation in the time constant associated with the 5T2 → 1A1 high-spin to low-spin relaxation process of tris(2,2'-bipyridine)iron(ii) ([Fe(bpy)3]2+) across a range of different solvents. Likely origins for this solvent dependence, including relevant solvent properties, ion pairing, and changes in solvation energy, were considered and assessed by studying [Fe(bpy)3]2+ and related derivatives via ultrafast time-resolved absorption spectroscopy and computational analyses. It was concluded that the effect is most likely associated with the volume change of the chromophore arising from the interconfigurational nature of the 5T2 → 1A1 relaxation process, resulting in changes to the solvent-solvent and/or solvent-solute interactions of the primary solvation shell sufficient to alter the overall reorganization energy of the system and influencing the kinetics of ground-state recovery.

RESUMEN

With the advent of the materials genome initiative (MGI) in the United States and a similar focus on materials data around the world, a number of materials data resources and associated vocabularies, tools, and repositories have been developed. While the majority of systems focus on slices of computational data with an emphasis on metallic alloys, NanoMine is an open source platform with the goal of curating and storing widely varying experimental data on polymer nanocomposites (polymers doped with nanoparticles) and providing access to characterization and analysis tools with the long-term objective of promoting facile nanocomposite design. Data on over 2500 samples from the literature and individual laboratories has been curated to date into NanoMine, including 230 samples from the papers bound in this virtual issue. This virtual issue represents an experiment of the flexibility of the data repository to capture the unique experimental metadata requirements of many data sets at one time and to challenge the authors to participate in the curation of their research data associated with a given publication. In principle, NanoMine offers a FAIR platform in which data published in papers becomes directly Findable and Accessible via simple search tools, with open metadata standards that are Interoperable with larger materials data registries, and allows easy Reuse of data, e.g. benchmarking against new results. Our hope is that with time, platforms such as this one could capture much of the newly published data on materials and form nodes in an interconnected materials data ecosystem which would allow researchers to robustly archive their data, add to the growing body of readily accessible data, and enable new forms of discovery by application of data analysis and design tools.

RESUMEN

The power of chemistry to prepare new molecules and materials has driven the quest for new approaches to solve problems having global societal impact, such as in renewable energy, healthcare and information science. In the latter case, the intrinsic quantum nature of the electronic, nuclear and spin degrees of freedom in molecules offers intriguing new possibilities to advance the emerging field of quantum information science. In this Perspective, which resulted from discussions by the co-authors at a US Department of Energy workshop held in November 2018, we discuss how chemical systems and reactions can impact quantum computing, communication and sensing. Hierarchical molecular design and synthesis, from small molecules to supramolecular assemblies, combined with new spectroscopic probes of quantum coherence and theoretical modelling of complex systems, offer a broad range of possibilities to realize practical quantum information science applications.

RESUMEN

We have employed a range of ultrafast X-ray spectroscopies in an effort to characterize the lowest energy excited state of [Fe(dcpp)2]2+ (where dcpp is 2,6-(dicarboxypyridyl)pyridine). This compound exhibits an unusually short excited-state lifetime for a low-spin Fe(II) polypyridyl complex of 270 ps in a room-temperature fluid solution, raising questions as to whether the ligand-field strength of dcpp had pushed this system beyond the 5T2/3T1 crossing point and stabilizing the latter as the lowest energy excited state. Kα and Kß X-ray emission spectroscopies have been used to unambiguously determine the quintet spin multiplicity of the long-lived excited state, thereby establishing the 5T2 state as the lowest energy excited state of this compound. Geometric changes associated with the photoinduced ligand-field state conversion have also been monitored with extended X-ray absorption fine structure. The data show the typical average Fe-ligand bond length elongation of ∼0.18 Å for a 5T2 state and suggest a high anisotropy of the primary coordination sphere around the metal center in the excited 5T2 state, in stark contrast to the nearly perfect octahedral symmetry that characterizes the low-spin 1A1 ground state structure. This study illustrates how the application of time-resolved X-ray techniques can provide insights into the electronic structures of molecules-in particular, transition metal complexes-that are difficult if not impossible to obtain by other means.