RESUMEN

Herein, we report the case of primary amyloidosis with multi-organ involvement in a female patient in her 50s. The patient had a history of relapsing polychondritis, chronic kidney disease, and monoclonal gammopathy of undetermined significance (MGUS). The clinical manifestations included neuropathic pain, sensorimotor polyneuropathy, intrahepatic cholestatic liver injury, gastrointestinal symptoms, dysautonomia, and myocardial thickening. Initial histologic evaluations of the abdominal fat pad aspirate and bone marrow biopsy were negative for amyloid deposition. However, due to a high index of suspicion, a second bone marrow biopsy was performed, confirming the presence of the amyloid protein. Given the patient's complex medical history, other types of amyloidosis, such as AA amyloidosis, AL amyloidosis, and ß2-microglobulin amyloidosis, should also be considered as differential diagnoses. The type of amyloid protein was subsequently identified through laser microdissection of amyloid fibrils followed by liquid chromatography-tandem mass spectrometry as AL-lambda (amyloid light-chain) amyloidosis. The patient presented unfavorable evolution, with progressive dysautonomia, being admitted to the ICU, culminating in refractory circulatory shock, and undergoing an empirical broad-spectrum antibiotic therapy. After a few days, she presented pulseless ventricular tachycardia, culminating in her death, before undergoing specific treatment. This article highlights the crucial role of precise identification in guiding appropriate therapeutic strategies for this complex, yet potentially severe, diseases.

RESUMEN

Coastal zones support the most productive marine ecosystems, yet they are increasingly threatened by anthropogenic stressors such as dredging. In this study, we investigated how seasonal variation and dredging activities conducted during the construction of a harbor and submarine base (Sepetiba Bay, RJ, Brazil) affected the phytoplankton and zooplankton assemblages. The observed temporal variability at five different sites over 10 years revealed that dredging exceeds the expected influence of dry and rainy seasons on plankton abundance and diversity. In general, the abundance of both groups increased during dredging due to the resuspension of nutrients and benthic organisms. This increase was particularly evident in the dinoflagellate Scrippsiellaa cuminata, the diatoms Thalassiosira rotula and Nitzschia longissima, and the herbivorous zooplankton Acartia clausii and Pseudevadne tergestina. Moreover, season and dredging activities synergistically influenced plankton assemblages, resulting in larger seasonal variations during dredging activities. After the end of the harbor construction, plankton abundance decreased and remained low until the end of the monitoring, which may indicate persistent changes in the biodiversity and ecosystem functioning of impacted areas.

Asunto(s)

RESUMEN

Objective The present study aimed to develop and evaluate the use of customized guides in patients undergoing surgery to correct vertebral deformity with a pedicular fixation system. Methods Four patients with spinal deformity (three with idiopathic scoliosis and one with congenital kyphoscoliosis) underwent surgical treatment to correct the deformity with a pedicular fixation system. Prototypes of 3D cost guides were developed and evaluated using technical feasibility, accuracy, and radiation exposure. Results The present study included 85 vertebral pedicles in which pedicle screws were inserted into the thoracic spine (65.8%) and into the lumbar spine (34.2%). Technical viability was positive in 46 vertebral pedicles (54.1%), with 25 thoracic (54%) and 21 lumbar (46%). Technical viability was negative in 39 pedicles (45.9%), 31 of which were thoracic (79.5%), and 8 were lumbar (20.5%). In assessing accuracy, 36 screws were centralized (78.2%), of which 17 were in the thoracic (36.9%) and 19 in the lumbar spine (41.3%). Malposition was observed in 10 screws (21.7%), of which 8 were in the thoracic (17.4%) and 2 in the lumbar spine (4.3%). The average radiation record used in the surgical procedures was of 5.17 ± 0.72 mSv, and the total time of use of fluoroscopy in each surgery ranged from 180.3 to 207.2 seconds. Conclusion The customized guide prototypes allowed the safe preparation of the pilot orifice of the vertebral pedicles in patients with deformities with improved accuracy and reduced intraoperative radiation.

RESUMEN

Abstract Objective The present study aimed to develop and evaluate the use of customized guides in patients undergoing surgery to correct vertebral deformity with a pedicular fixation system. Methods Four patients with spinal deformity (three with idiopathic scoliosis and one with congenital kyphoscoliosis) underwent surgical treatment to correct the deformity with a pedicular fixation system. Prototypes of 3D cost guides were developed and evaluated using technical feasibility, accuracy, and radiation exposure. Results The present study included 85 vertebral pedicles in which pedicle screws were inserted into the thoracic spine (65.8%) and into the lumbar spine (34.2%). Technical viability was positive in 46 vertebral pedicles (54.1%), with 25 thoracic (54%) and 21 lumbar (46%). Technical viability was negative in 39 pedicles (45.9%), 31 of which were thoracic (79.5%), and 8 were lumbar (20.5%). In assessing accuracy, 36 screws were centralized (78.2%), of which 17 were in the thoracic (36.9%) and 19 in the lumbar spine (41.3%). Malposition was observed in 10 screws (21.7%), of which 8 were in the thoracic (17.4%) and 2 in the lumbar spine (4.3%). The average radiation record used in the surgical procedures was of 5.17 ± 0.72 mSv, and the total time of use of fluoroscopy in each surgery ranged from 180.3 to 207.2 seconds. Conclusion The customized guide prototypes allowed the safe preparation of the pilot orifice of the vertebral pedicles in patients with deformities with improved accuracy and reduced intraoperative radiation.

Resumo Objetivo O presente estudo teve como objetivo desenvolver e avaliar a utilização de guias personalizadas em pacientes submetidos a cirurgia para correção de deformidades vertebrais com sistema de fixação pedicular. Métodos Quatro pacientes com deformidade espinhal (três casos de escoliose idiopática e um caso de cifoescoliose congênita) foram submetidos a tratamento cirúrgico corretivo com sistema de fixação pedicular. Protótipos de guias tridimensionais foram desenvolvidos e avaliados quanto à viabilidade técnica, precisão e exposição à radiação. Resultados O presente estudo incluiu 85 pedículos vertebrais submetidos à inserção de parafusos pediculares na coluna torácica (65,8%) e na coluna lombar (34,2%). A viabilidade técnica foi positiva em 46 pedículos vertebrais (54,1%), sendo 25 torácicos (54%) e 21 lombares (46%). A viabilidade técnica foi negativa em 39 pedículos (45,9%), sendo 31 torácicos (79,5%) e 8 lombares (20,5%). Quanto à precisão, 36 parafusos foram centralizados (78,2%), sendo 17 na coluna torácica (36,9%) e 19 na coluna lombar (41,3%). O mau posicionamento foi observado em 10 parafusos (21,7%), sendo 8 na coluna torácica (17,4%) e 2 na coluna lombar (4,3%). A radiação média registrada nos procedimentos cirúrgicos foi de 5,17 ± 0,72 mSv, e o tempo total de uso da fluoroscopia em cada cirurgia variou de 180,3 a 207,2 segundos. Conclusão Os protótipos de guias personalizadas permitiram o preparo seguro do orifício piloto nos pedículos vertebrais em casos de deformidade, com maior precisão e menor exposição intraoperatória à radiação.

Asunto(s)

RESUMEN

ABSTRACT Objective: Cervical spondylotic myelopathy (CSM) is the main cause of spinal dysfunction in adults. The type of surgical approach to treatment is not well defined in the literature. The objective is to report the results obtained through isolated posterior decompression in patients with a previous indication of the combined approach for the treatment of cervical spondylotic myelopathy. Methods: This is a therapeutic study with level of evidence II, according to the Oxford classification table. Ten patients who underwent isolated posterior approach surgery for the treatment of cervical spondylotic myelopathy were evaluated through imaging and questionnaires (visual analog scale, mJOA-Br scale - Brazilian Portuguese version of the Modified Japanese Orthopedic Association Scale, and Neck Disability Index (NDI)), comparing pre- and postoperative results. Results: Late evaluation of the 10 patients was performed in the period ranging from 24 to 36 months (mean of 30.3 months ± 7.25) following surgery. The comparison of the clinical and radiological parameters in all patients showed a statistical difference in relation to the preoperative scales applied and to the degree of cervical lordosis (p <0.05), evidencing improvement after decompression and posterior fixation of the cervical spine. Conclusions: The isolated posterior approach (decompression, fixation and arthrodesis) allowed the clinical and radiological improvement of patients with cervical spondylotic myelopathy and who had an indication of the complementary anterior approach. Level of evidence II; Retrospective study.

RESUMO Objetivo: A mielopatia cervical espondilótica (MCE) é a principal causa de disfunção medular nos adultos. O tipo de abordagem cirúrgica para o tratamento não é bem definido na literatura. O objetivo é relatar os resultados obtidos por meio da descompressão posterior isolada nos pacientes com indicação prévia da abordagem combinada para o tratamento da mielopatia cervical espondilótica. Métodos: Trata-se de um estudo terapêutico com nível de evidência II, conforme a tabela de classificação Oxford. Dez pacientes submetidos apenas à abordagem cirúrgica posterior para tratamento de mielopatia cervical espondilótica foram avaliados por meio de exames de imagem e de questionários (escala visual analógica, escala mJOA-Br - Versão em Português da Escala Modificada da Sociedade Japonesa de Ortopedia e escala de incapacidade cervical - Neck Disability Index - NDI), comparando os resultados pré e pós-operatórios. Resultados: A avaliação tardia dos 10 pacientes foi realizada no período que variou de 24 a 36 meses (média de 30,3 meses ± 7,25) de pós-operatório. A comparação dos parâmetros clínicos e radiológicos em todos os pacientes mostrou diferença estatística com relação ao pré-operatório para as escalas aplicadas e para o grau de lordose cervical (p < 0,05), evidenciando a melhora depois da descompressão e da fixação posterior da coluna cervical. Conclusões: A abordagem posterior isolada (descompressão, fixação e artrodese) permitiu a melhora clínica e radiológica de pacientes com mielopatia cervical espondilótica e que tinham indicação da abordagem anterior complementar. Nível de evidência II; Estudo retrospectivo.

RESUMEN Objetivo: La mielopatía cervical espondilótica (MCE) es la principal causa de disfunción medular en los adultos. El tipo de abordaje quirúrgico para el tratamiento no está bien definido en la literatura. El objetivo es relatar los resultados obtenidos por medio de la descompresión posterior aislada en los pacientes con indicación previa del abordaje combinado para el tratamiento de la mielopatía cervical espondilótica. Métodos: Se trata de un estudio terapéutico con nivel de evidencia II, conforme a la tabla de clasificación Oxford. Diez pacientes sometidos únicamente al abordaje quirúrgico posterior para el tratamiento de la mielopatía cervical espondilótica fueron evaluados mediante exámenes de imagen y cuestionarios (escala analógica visual, escala mJOA-Br - versión en portugués de la escala modificada de la Sociedad Japonesa de Ortopedia y escala de incapacidad cervical - Neck Disability Index - NDI), comparando los resultados pre y postoperatorios. Resultados: La evaluación tardía de los 10 pacientes fue realizada en el período que varió de 24 a 36 meses (promedio de 30,3 meses ± 7,25) de postoperatorio. La comparación de los parámetros clínicos y radiológicos en todos los pacientes mostró diferencia estadística con relación al preoperatorio para las escalas aplicadas y para el grado de lordosis cervical (p <0,05), evidenciando la mejora después de la descompresión y de la fijación posterior de la columna cervical. Conclusiones: El abordaje posterior aislado (descompresión, fijación y artrodesis) permitió la mejora clínica y radiológica de pacientes con mielopatía cervical espondilótica y que tenían indicación del abordaje anterior complementario. Nivel de evidencia II; Estudio retrospectivo.

Asunto(s)

RESUMEN

Peptidomimetics of the class of dipeptidyl nitrile analog peptoids were synthesized as inhibitors of mammalian cysteine proteases of the papain superfamily. The dipeptidyl nitrile side chains were attached to the peptide backbone's nitrogen atom, not to the α-carbons. Synthesized nitrile-based peptoid analogs that lack the hydrogen amide at P2-P3 are responsible for many of the secondary structure elements in peptides and proteins, making them resistant to proteolysis. The designed peptoids would lose a hydrogen bond with cruzain Asp161 decreasing the affinity toward the enzyme. A structure-activity relationship and matched molecular pair-based analysis between the dipeptidyl nitrile Neq0409 and its peptoid 4a yielded the following cruzain affinities: pKiNeq0409 = 6.5 and pKi4a = 5.2. respectively. A retrosynthetic matched molecular pair cliff (RMMP-cliff) analysis with a ΔpKiNeq0409-4a of 1.3 log is found for this transformation. These novel peptoids were then optimized, leading to compound 4i, with high cruzain inhibition (pKi = 6.8). Cross-class cathepsin activity was observed for some of these novel compounds against cathepsins K, L and S, while other compounds presented a selective inhibition of cathepsin K (4b, 4c, 4k) over ten times higher than the other enzymes. The putative mode of binding was determined by using covalent docking, which also aided to describe the structure-activity relationship (SAR). Interestingly, none of the peptoids inhibited CatB to any appreciable extent. These results provide guidance to identify novel bioactive nitrile-based peptoids.

Asunto(s)

RESUMEN

Objective Compare by mechanical tests the pullout resistance and the insertion torque of rough and smooth pedicle screws. Methods Pedicle screws with rough surface and smooth surface, with diameters of 4.8; 5.5 and 6.5 mm, were inserted in polyurethane blocks with density of 10 PCF (0.16 g/cm3). Insertion torque and pullout strength were assessed. Results The pullout strength of the rough surface and smooth surface screws did not differ, except in the group of 4.8 mm diameter screws. In this group, the rough surface screws showed greater resistance to pullout. Conclusion Pedicle screws with a rough surface did not show increased pullout resistance in the acute phase of their insertion in polyurethane blocks compared to smooth surface screws. The rough surface screws had a higher insertion torque than the smooth surface screws, depending on the diameter of the screw and the preparation of the pilot hole.

RESUMEN

Gout is a crystalline arthropathy frequent in the population, but gouty spondyloarthropathy, also called axial gout, is uncommon. The current case report presents a rare case of cervical myelopathy secondary to axial gout. A 50-year-old female patient, without previous pathologies, presented with loss of strength, altered sensitivity, and pyramidal release for 2 years. The computed tomography showed a lytic image in the spinous process of C7, and signs of myelopathy with myelomalacia on magnetic resonance imaging of the cervical spine. After the surgical procedure and biopsy of the material, the diagnosis was gout, and treatment for the pathology was started, with complete improvement of the condition. The diagnosis of axial gout should be included in the spectrum of the differential diagnosis of diseases that affect the spine. Although gouty spondyloarthritis (or spondylitis) is uncommon, there is an underestimated occurrence due to the lack of investigation of the cases. The early diagnosis and treatment of the pathology can prevent patients from presenting complications of the disease, as reported in the present study.

RESUMEN

Abstract Gout is a crystalline arthropathy frequent in the population, but gouty spondyloarthropathy, also called axial gout, is uncommon. The current case report presents a rare case of cervical myelopathy secondary to axial gout. A 50-year-old female patient, without previous pathologies, presented with loss of strength, altered sensitivity, and pyramidal release for 2 years. The computed tomography showed a lytic image in the spinous process of C7, and signs of myelopathy with myelomalacia on magnetic resonance imaging of the cervical spine. After the surgical procedure and biopsy of the material, the diagnosis was gout, and treatment for the pathology was started, with complete improvement of the condition. The diagnosis of axial gout should be included in the spectrum of the differential diagnosis of diseases that affect the spine. Although gouty spondyloarthritis (or spondylitis) is uncommon, there is an underestimated occurrence due to the lack of investigation of the cases. The early diagnosis and treatment of the pathology can prevent patients from presenting complications of the disease, as reported in the present study.

Resumo A gota é uma artropatia cristalina frequente na população; entretanto, a espondiloartropatia gotosa, também chamada de gota axial, é incomum. O presente relato de caso apresenta um caso raro de mielopatia cervical secundária a gota axial. Uma paciente de 50 anos de idade, sem patologias prévias, apresentou quadro de perda de força, alteração de sensibilidade e liberação piramidal há 2 anos. A tomografia computadorizada evidenciou imagem lítica no processo espinhoso de C7, e sinais de mielopatia com mielomalácia foram observados na ressonância magnética da coluna cervical. Após o procedimento cirúrgico e biópsia do material, o diagnóstico foi de gota, e o tratamento para a patologia foi iniciado, com melhora completa do quadro. O diagnóstico de gota axial deve ser incluído no espectro do diagnóstico diferencial das doenças que acometem a coluna vertebral. Apesar de a espondiloartrite gotosa ser incomum, há uma ocorrência subestimada devido a não investigação dos casos. O diagnóstico precoce e tratamento da patologia pode evitar que pacientes apresentem complicações da doença, como a relatada no presente estudo.

Asunto(s)

RESUMEN

Abstract Objective Compare by mechanical tests the pullout resistance and the insertion torque of rough and smooth pedicle screws. Methods Pedicle screws with rough surface and smooth surface, with diameters of 4.8; 5.5 and 6.5 mm, were inserted in polyurethane blocks with density of 10 PCF (0.16 g/cm3). Insertion torque and pullout strength were assessed. Results The pullout strength of the rough surface and smooth surface screws did not differ, except in the group of 4.8 mm diameter screws. In this group, the rough surface screws showed greater resistance to pullout. Conclusion Pedicle screws with a rough surface did not show increased pullout resistance in the acute phase of their insertion in polyurethane blocks compared to smooth surface screws. The rough surface screws had a higher insertion torque than the smooth surface screws, depending on the diameter of the screw and the preparation of the pilot hole.

Resumo Objetivo Comparar por testes mecânicos a resistência ao arrancamento e o torque de inserção do parafuso pedicularjateado e liso. Métodos Parafusos pediculares de superfície áspera e de superfície lisa com diâmetros de 4,8; 5,5 e 6,5 mm foram inseridos em blocos de poliuretano com densidade de 10 PCF (0,16 g/cm3). O torque de inserção e a força de arrancamento foram avaliados. Resultados A força de arrancamento dos parafusos de superfície áspera e de superfície lisa não diferiu, exceto no grupo de parafusos com 4,8 mm de diâmetro. Nesse grupo, os parafusos de superfície áspera apresentaram maior resistência ao arrancamento. Conclusão Os parafusos pediculares de superfície áspera não apresentaram aumento da resistência ao arrancamento na fase aguda de sua inserção em blocos de poliuretano em relação aos parafusos de superfície lisa. Os parafusos de superfície áspera apresentaram maior torque de inserção que os parafusos de superfície lisa, dependendo do diâmetro do parafuso e da preparação do furo piloto.

Asunto(s)

RESUMEN

Non-traumatic rotational atlantoaxial subluxation (NTARS) is rare and mostly reported after infection of the upper respiratory tract and named Grisel's syndrome. NTARS has also been reported after head-and-neck surgery, but it is extremely rare after otoplasty. A case of NTARS after bilateral otoplasty is reported under local anesthesia, a 15-year-old female being presented with painful torticollis. The diagnosis of atlantoaxial rotatory subluxation was performed using radiographs and computed tomography 2 weeks after the surgery. Closed reduction was performed by traction of the head and transoral direct pressure over an anterior dislocated C1 mass. The reposition of the joint was achieved, but it was very unstable, and it was not possible to keep the reduction. Open posterior reduction and posterior C1-C2 arthrodesis were performed followed by the use of a soft collar during 3 months.

RESUMEN

Cysteine protease B (CPB) can be targeted by reversible covalent inhibitors that could serve as antileishmanial compounds. Here, sixteen dipeptidyl nitrile derivatives were synthesized, tested against CPB, and analyzed using matched molecular pairs to determine the effects of stereochemistry and p-phenyl substitution on enzyme inhibition. The compound (S)-2-(((S)-1-(4-bromophenyl)-2,2,2-trifluoroethyl)amino)-N-(1-cyanocyclopropyl)-3-phenylpropanamide (5) was the most potent CPB inhibitor (pKi = 6.82), which was also selective for human cathepsin B (pKi < 5). The inversion of the stereochemistry from S to R was more detrimental to potency when placed at the P2 position than at P3. The p-Br derivatives were more potent than the p-CH3 and p-OCH3 derivatives, probably due to intermolecular interactions with the S3 subsite.

Asunto(s)

RESUMEN

ABSTRACT Objectives To observe the influence of the congruence of the tapping of the pilot hole on the anchorage of the pedicle screws. Methods 5.5 and 6.5 mm screws from two vertebral fixation systems (Pedicol and Safe) were inserted into polyurethane blocks. Experimental groups were formed according to the pilot hole preparation: A- drilling with a 2.7 mm drill bit, B- Tapping of the pilot hole with a tap of lesser diameter than the diameter of the screw with a congruent thread design, C- Tapping of the pilot hole with a tap of lesser diameter than the diameter of the screw and an incongruous thread design. The polyurethane blocks with the screws were subjected to a tensile strength test to evaluate the pullout resistance of the screws. Results Using congruent pilot hole tapping of a lesser diameter and congruent thread design increased the pullout resistance of the rough-surface screws (Safe). The screws with a smooth surface (Pedicol) presented greater pullout resistance with tapping of a lesser diameter and incongruous thread design. Conclusions The congruence of the tap used to prepare the pilot hole increased the pullout resistance of the rough-surfaced screws. Level of Evidence III; Therapeutic Study.

RESUMO Objetivos Observar a influência da congruência do macheamento do orifício piloto na ancoragem dos parafusos pediculares. Métodos Parafusos de 5,5 e 6,5 mm, pertencentes a dois sistemas de fixação vertebral (Pedicol e Safe), foram introduzidos em blocos de poliuretano. Os grupos experimentais foram formados de acordo com o preparo do orifício piloto: A - perfuração com broca de 2,7 mm, B - macheamento do orifício piloto com macho de diâmetro inferior ao diâmetro do parafuso e desenho de rosca congruente, C - macheamento do orifício piloto com macho de diâmetro inferior ao diâmetro do parafuso e desenho de rosca incongruente. Os blocos de poliuretano com os parafusos foram submetidos a ensaio de resistência à tração para avaliar a resistência dos parafusos ao arrancamento. Resultados A utilização do macheamento do orifício piloto de menor tamanho e congruente aumentou a resistência ao arrancamento dos parafusos de superfície rugosa (Safe). Os parafusos de superfície lisa (Pedicol) apresentaram maior resistência ao arrancamento com a utilização do macheamento com menor diâmetro e incongruente. Conclusões A congruência do macho utilizado para o preparo do orifício piloto aumentou a resistência ao arrancamento nos parafusos de superfície rugosa. Nível de Evidência III; Estudo terapêutico.

RESUMEN Objetivos Observar la influencia de la congruencia del taladramiento del orificio piloto en el anclaje de los tornillos pediculares. Métodos Fueron introducidos tornillos de 5,5 y 6,5 mm, pertenecientes a dos sistemas de fijación vertebral (Pedicol y Safe) en bloques de poliuretano. Los grupos experimentales fueron formados de acuerdo con la preparación del orificio piloto: A- perforación con broca de 2,7 mm, B- taladramiento del orificio piloto con mecha de diámetro inferior al diámetro del tornillo y diseño de rosca congruente, C- taladramiento del orificio piloto con mecha de diámetro inferior al diámetro del tornillo y diseño de rosca incongruente. Los bloques de poliuretano con los tornillos fueron sometidos a ensayo de resistencia a la tracción para evaluar la resistencia de los tornillos al arrancamiento. Resultados El uso del taladramiento del orificio piloto de menor tamaño y congruente aumentó la resistencia al arrancamiento de los tornillos de superficie rugosa (Safe). Los tornillos de superficie lisa (Pedicol) presentaron mayor resistencia al arrancamiento con el uso del taladramiento con menor diámetro e incongruente. Conclusiones La congruencia de la mecha utilizada para la preparación del orificio piloto aumentó la resistencia al arrancamiento en los tornillos de superficie rugosa. Nivel de Evidencia III; Estudio terapéutico.

Asunto(s)

RESUMEN

OBJECTIVE: To evaluate the morphological changes on the intervertebral foramen and segmental lordosis related to the transforaminal lumbar interbody fusion (TLIF) positioning. METHODS: PEEK cages were placed in the disc space (L1-S1) of a polyurethane anatomical model. Cages of different heights (8 mm, 10 mm, 12 mm and 14 mm) were positioned in the posterior, medial or anterior part of the vertebral body surface, and the intervertebral foramen and segmental lordosis heights were measured after their insertion. RESULTS: The vertebral foramen height decreased in all positions and heights of the cages in relation to the control. The cage posterior positioning induced a smaller reduction in the vertebral foramen height. Vertebral lordosis tended to increase in relation to the control, and the greatest increase occurred with the cage posterior positioning. CONCLUSION: Cage positioning induces changes in the intervertebral foramen height and in the vertebral segment lordosis. Cage posterior positioning induces a smaller reduction of the intervertebral foramen height and increases the vertebral segment lordosis. Level of evidence III, Therapeutic study.

OBJETIVO: Avaliar as alterações morfológicas do forâmen intervertebral e da lordose segmentar relacionadas ao posicionamento do espaçador intersomático na artrodese lombar intersomática transforaminal (TLIF). MÉTODOS: Cages de PEEK foram colocados no espaço discal (L1-S1) de modelo antômico de poliuretana. Os cages de diferentes alturas (8 mm, 10 mm, 12 mm e 14 mm) foram posicionados na parte posterior, média ou anterior da superfície do corpo vertebral e a altura do forame intervertebral e lordose segmentar mensuradas após a sua inserção. RESULTADOS: Foi observado redução da altura do forame vertebral em todos os posicionamentos e alturas dos cages em relação ao controle. O posicionamento posterior do Cage induziu à menor redução da altura do forame vertebral. A lordose do semento vertebral apresentou tendência de aumento em relação ao controle, tendo sido observado a maior tendência com o posicionamento posterior do Cage. CONCLUSÃO: O posicionamento do Cage induz a alterações da altura do forame intervertebral e lordose do segmento vertebral. O posicionamento posterior do Cage induz a menor redução da altura do forame intervertebral e aumento da lordose do segmento vertebral. Nível de evidência III, Estudo terapêutico.

RESUMEN

ABSTRACT Objective: To evaluate the morphological changes on the intervertebral foramen and segmental lordosis related to the transforaminal lumbar interbody fusion (TLIF) positioning. Methods: PEEK cages were placed in the disc space (L1-S1) of a polyurethane anatomical model. Cages of different heights (8 mm, 10 mm, 12 mm and 14 mm) were positioned in the posterior, medial or anterior part of the vertebral body surface, and the intervertebral foramen and segmental lordosis heights were measured after their insertion. Results: The vertebral foramen height decreased in all positions and heights of the cages in relation to the control. The cage posterior positioning induced a smaller reduction in the vertebral foramen height. Vertebral lordosis tended to increase in relation to the control, and the greatest increase occurred with the cage posterior positioning. Conclusion: Cage positioning induces changes in the intervertebral foramen height and in the vertebral segment lordosis. Cage posterior positioning induces a smaller reduction of the intervertebral foramen height and increases the vertebral segment lordosis. Level of evidence III, Therapeutic study.

RESUMO Objetivo: Avaliar as alterações morfológicas do forâmen intervertebral e da lordose segmentar relacionadas ao posicionamento do espaçador intersomático na artrodese lombar intersomática transforaminal (TLIF). Métodos: Cages de PEEK foram colocados no espaço discal (L1-S1) de modelo antômico de poliuretana. Os cages de diferentes alturas (8 mm, 10 mm, 12 mm e 14 mm) foram posicionados na parte posterior, média ou anterior da superfície do corpo vertebral e a altura do forame intervertebral e lordose segmentar mensuradas após a sua inserção. Resultados: Foi observado redução da altura do forame vertebral em todos os posicionamentos e alturas dos cages em relação ao controle. O posicionamento posterior do Cage induziu à menor redução da altura do forame vertebral. A lordose do semento vertebral apresentou tendência de aumento em relação ao controle, tendo sido observado a maior tendência com o posicionamento posterior do Cage. Conclusão: O posicionamento do Cage induz a alterações da altura do forame intervertebral e lordose do segmento vertebral. O posicionamento posterior do Cage induz a menor redução da altura do forame intervertebral e aumento da lordose do segmento vertebral. Nível de evidência III, Estudo terapêutico.

RESUMEN

ABSTRACT Objective Considering that the technique of spinous process splitting has been advocated as a less invasive treatment of lumbar stenosis, the objective of this study was to evaluate the preliminary results of this technique in the surgical treatment of lumbar canal stenosis. Methods Twenty patients with lumbar spinal canal stenosis who underwent surgical treatment for lumbar canal decompression with the spinous process splitting technique were assessed in the preoperative period and on postoperative days 1, 7 and 30 for VAS for lower back and lower limbs pain and radiographic evaluation of the operated segment. Results The mean visual analogue scale score for lumbar pain in the preoperative assessment was 4.2 ± 3.37 and 0.85 ± 0.88, 1.05 ± 1.19 and 1.15 ± 1.04 after 1, 7 and 30 postoperative days, respectively. The mean VAS score for lower limb pain was 8 ± 1.72 preoperatively, and 0.7 ± 1.13, 0.85 ± 1.04, and 1.05 ± 1 after 1, 7, and 30 postoperative days, respectively. There were no radiographic signs of instability of the vertebral segment operated in the radiographic evaluation. Conclusions Decompression of the lumbar canal through the spinous process splitting technique in patients with lumbar canal stenosis had good immediate and short-term results in relation to low back and lower limbs pain. Level of evidence IV; Therapeutic Study.

RESUMO Objetivo A técnica da separação do processo espinhoso tem sido preconizada como técnica menos invasiva para o tratamento da estenose lombar. Objetivo é avaliar os resultados preliminares dessa técnica no tratamento cirúrgico da estenose do canal lombar. Métodos Vinte pacientes portadores de estenose do canal vertebral lombar e submetidos ao tratamento cirúrgico para descompressão do canal lombar, por meio da técnica da separação do processo espinhoso, foram avaliados no período pré-operatório, um, sete e trinta dias de pós-operatório, por meio da escala visual de avaliação da dor lombar e dor nos membros inferiores e avaliação radiográfica do segmento operado. Resultados O escore médio da escala visual analógica da dor lombar na avaliação pré-operatória foi 4,2 ± 3,37 e, respectivamente, 0,85 ± 0,88; 1,05 ± 1,19 e 1,15 ± 1,04 após um, sete e trinta dias de pós-operatório. O escore médio da escala visual analógica da dor nos membros inferiores foi 8 ± 1,72 no pré-operatório e, respectivamente, 0,7 ± 1,13; 0,85 ± 1,04 e 1,05 ± ١ após um, sete e trinta dias de pós-operatório. Não foram observados sinais radiográficos de instabilidade do segmento vertebral operado na avaliação radiográfica. Conclusão A descompressão do canal lombar por meio da técnica da separação do processo espinhoso nos pacientes com estenose do canal lombar apresentou bons resultados imediatos e a curto prazo, em relação à dor lombar e dor nos membros inferiores . Nível de evidência IV; Estudo Terapêutico.

RESUMEN Objetivo Teniendo en cuenta que la técnica de separación del proceso espinoso ha sido recomendada para el tratamiento menos invasivo de la estenosis lumbar, el objetivo de este estudio fue evaluar los resultados preliminares de esta técnica en el tratamiento quirúrgico de la estenosis del canal lumbar. Métodos Veinte pacientes con estenosis del canal espinal lumbar que se sometieron a tratamiento quirúrgico para descompresión del canal lumbar con la técnica de separación del proceso espinoso se evaluaron en el período preoperatorio y en los días 1, 7 y 30 postoperatorios mediante EVA para del dolor lumbar y de los miembros inferiores y evaluación radiográfica del segmento operado. Resultados La puntuación promedio de la escala visual analógica del dolor lumbar en la evaluación preoperatoria fue de 4,2 ± 3,37 y 0,85 ± 0,88; 1,05 ± 1,19 y 1,15 ± 1,04 después de 1, 7 y 30 días postoperatorios. La puntuación promedio de la EVA para el dolor de las extremidades inferiores fue 8 ± 1,72 en el preoperatorio y de 0,7 ± 1,13; 0,85 ± 1,04 y 1,05 ± 1 después de 1, 7 y 30 días postoperatorios, respectivamente. No se observaron signos radiográficos de inestabilidad del segmento vertebral operado en la evaluación radiográfica. Conclusiones La descompresión del canal lumbar por medio de la técnica de separación del proceso espinoso en pacientes con estenosis del canal lumbar tuvo buenos resultados inmediatos y a corto plazo con relación al dolor lumbar y las extremidades inferiores. Nivel de evidencia IV; Estudio Terapéutico.

Asunto(s)

RESUMEN

OBJECTIVE: To assess the intra- and inter-observer reliability of a Brazilian Portuguese translated and cross-culturally adapted version of the mJOA questionnaire. METHODS: The reliability of the Brazilian Portuguese version of the mJOA scale was assessed through the evaluation of a sample of patients with cervical myelopathy by two independent experienced spine surgeon examiners. Inter-observer reliability was defined by the Intraclass Correlation Coefficient (ICC) between the evaluations of the two examiners, and intra-observer reliability was assessed by the ICC between the two evaluations of one examiner. RESULTS: Fifty-five patients were included in the study (mean age 58.7 years). The ICC for inter-observer reliability of the Brazilian Portuguese version of the mJOA was 0.967, and the ICC for intra-observer reliability was 0.869, both classified as "almost perfect" (> 0.81). CONCLUSION: The Brazilian Portuguese translated and cross-culturally adapted version of the mJOA questionnaire appears to be valid and reliable. Level of evidence I, Diagnostic Studies, Investigating a Diagnostic Test.

OBJETIVO: Avaliar a confiabilidade intra e interobservador da versão do questionário mJOA traduzida e adaptada culturalmente para o português brasileiro. MÉTODOS: A confiabilidade da versão em português da escala mJOA foi avaliada em uma amostra de pacientes com mielopatia cervical por dois examinadores com experiência em cirurgia da coluna vertebral. A confiabilidade interobservador foi definida pelo Coeficiente de Correlação Intraclasse (CCI) entre as avaliações dos dois examinadores e a confiabilidade intraobservador pelo CCI entre duas avaliações de um examinador. RESULTADOS: Cinquenta e cinco pacientes foram incluídos no estudo (média de idade: 58,7 anos). O CCI para confiabilidade interobservador da versão brasileira do mJOA foi 0,967 e o CCI para a confiabilidade intraobservador foi 0,869, ambas classificadas como "quase perfeita" (> 0,81). CONCLUSÃO: A versão do questionário mJOA traduzida e adaptada culturalmente para o português brasileiro demonstrou-se válida e confiável. Nível de Evidência I, Estudos diagnósticos, Investigação de um Exame para Diagnóstico.

RESUMEN

ABSTRACT Objective: To assess the intra- and inter-observer reliability of a Brazilian Portuguese translated and cross-culturally adapted version of the mJOA questionnaire. Methods: The reliability of the Brazilian Portuguese version of the mJOA scale was assessed through the evaluation of a sample of patients with cervical myelopathy by two independent experienced spine surgeon examiners. Inter-observer reliability was defined by the Intraclass Correlation Coefficient (ICC) between the evaluations of the two examiners, and intra-observer reliability was assessed by the ICC between the two evaluations of one examiner. Results: Fifty-five patients were included in the study (mean age 58.7 years). The ICC for inter-observer reliability of the Brazilian Portuguese version of the mJOA was 0.967, and the ICC for intra-observer reliability was 0.869, both classified as "almost perfect" (> 0.81). Conclusion: The Brazilian Portuguese translated and cross-culturally adapted version of the mJOA questionnaire appears to be valid and reliable. Level of evidence I, Diagnostic Studies, Investigating a Diagnostic Test.

RESUMO Objetivo: Avaliar a confiabilidade intra e interobservador da versão do questionário mJOA traduzida e adaptada culturalmente para o português brasileiro. Métodos: A confiabilidade da versão em português da escala mJOA foi avaliada em uma amostra de pacientes com mielopatia cervical por dois examinadores com experiência em cirurgia da coluna vertebral. A confiabilidade interobservador foi definida pelo Coeficiente de Correlação Intraclasse (CCI) entre as avaliações dos dois examinadores e a confiabilidade intraobservador pelo CCI entre duas avaliações de um examinador. Resultados: Cinquenta e cinco pacientes foram incluídos no estudo (média de idade: 58,7 anos). O CCI para confiabilidade interobservador da versão brasileira do mJOA foi 0,967 e o CCI para a confiabilidade intraobservador foi 0,869, ambas classificadas como "quase perfeita" (> 0,81). Conclusão: A versão do questionário mJOA traduzida e adaptada culturalmente para o português brasileiro demonstrou-se válida e confiável. Nível de Evidência I, Estudos diagnósticos, Investigação de um Exame para Diagnóstico.