RESUMEN

Aims: The study aims to find out the best possible method of cleaning the removable partial denture (RPD) by evaluating the Candida count limiting ability in RPD users using three different cleaning methods. Settings and Design: The present study is randomized controlled trial. Three groups were formed with 20 participants in each. The groups were Group 1 RPD cleansing done using sterile saline and denture brush (negative control group), Group 2 RPD cleansing done using soap and denture brush and Group 3 RPD cleansing done using denture cleansing tablet and denture brush. Materials and Methods: A baseline data and 15 days' postinsertion data of Candida count was recorded using swab collection, from the RPDs given. The swab was collected, cultured, and incubated using standard methods. Once Candida was identified using Sabouraud's dextrose agar, Candida albicans was further confirmed using germ tube test and cornmeal agar. Statistical Analysis Used: The analysis was done using SPSS software (IBM Corp. Released 2010. IBM SPSS Statistics for Windows, Version 19.0. Armonk, NY: IBM Corp.). Paired t-test, was used to compare the number of colonies pre and postintervention. The difference between the groups was analyzed using one-way analysis of variance (ANOVA) and Tukey's post hoc analysis. Results: The comparison of baseline data and postintervention data within each group using paired t test demonstrated statistically significant values; P = 0.046 and 0.000 in Group 2 and 3 respectively. The difference between the Candida colonies in three different groups after the intervention (15 Days) was analyzed using analysis of variance and found to be statistically significant with P = 0.004. Tukey's post hoc analysis was used to analyze the difference between the groups. It was concurred that there was a statistically significant difference between all three groups, but the difference in the mean was highest between the Group 1 and 3 (1210.99). Conclusion: Within the limitations of the study, it is concluded that the use of denture cleansers and brush on a daily basis would actively reduce the number of C. albicans colony formation in RPD and thereby improve the overall health of denture wearer.

Asunto(s)

RESUMEN

Kenny-Caffey syndrome (KCS) is a rarely reported autosomal disorder characterized by skeletal, ocular, and oral manifestations. Oral features such as microdontia, hypodontia, malalignment of teeth, bone loss, and difficulty in mastication results in serious esthetic and functional handicap. The prosthetic rehabilitation of such patients is challenging, especially when implant placement is not a good choice due to poor Vitamin D levels. The existing literature is scarce in describing the treatment options. This case report describes the oral rehabilitation of a patient affected with KCS using telescopic overdenture.

Asunto(s)

RESUMEN

Background During simultaneous PET/MRI, flexible MRI surface coils that lay on the patient are often omitted from PET attenuation correction processing, leading to quantification bias in PET images. Purpose To identify potential PET image quality improvement by using a recently developed lightweight MRI coil technology for the anterior array (AA) surface coil in both a phantom and in vivo study. Materials and Methods A phantom study and a prospective in vivo study were performed with a PET/CT scanner under three conditions: (a) no MRI surface coil (standard of reference), (b) traditional AA coil, and (c) lightweight AA coil. AA coils were not used in attenuation correction processing to emulate clinical PET/MRI. For the phantom study, PET images were reconstructed with and without time of flight (TOF) to assess quantification accuracy and uniformity. The in vivo study consisted of 10 participants (mean age, 66 years ± 10 [standard deviation]; six men) referred for a PET/CT oncologic examination who had undergone imaging between October 2019 and February 2020. Assessment of image quantification bias (defined as the standard error of the mean values) was conducted by comparing mean liver region of interest standardized uptake values with the no-coil standard of reference. A Wilcoxon signed-rank test was used to establish significance. Results For TOF and non-TOF, respectively, the phantom study revealed a mean PET quantification bias of -9.0% and -8.6% with the traditional AA coil and a mean PET quantification bias of -4.3% and -4.0% with the lightweight AA coil. The coefficients of variation reduced from 4.3% and 6.2% with the traditional AA coil to 2.1% and 2.7% with the lightweight AA coil, which demonstrated a homogeneity benefit from the lightweight coil that was greater with, versus without, TOF reconstruction. For the in vivo study, the mean liver standardized uptake value error was -5.9% with the traditional AA coil (P = .002 vs no coil) and -2.4% with the lightweight AA coil (P = .004 vs no coil). Conclusion The lightweight anterior array coil reduced PET image quantification bias by more than 50% compared with the traditional coil. Using the lightweight coil and performing time of flight-based reconstruction each reduced the variation of error. © RSNA, 2020 Online supplemental material is available for this article.

Asunto(s)

RESUMEN

PURPOSE: The aim of the study was to evaluate the effect of incorporation of organically modified nanoclay in 1%, 3%, and 5% by weight on the flexural strength, surface hardness, and linear polymerization shrinkage of heat cure denture base material. MATERIALS AND METHODS: One hundred and twenty specimens of heat-polymerized acrylic resin were fabricated. The specimens were divided into four groups (n = 10) coded I to IV. Group I was the control group (unmodified acrylic resin specimens). The specimens of the remaining three groups were reinforced with nanoclay (organically modified montmorillonite) nanoparticles to achieve loadings of 1%, 3%, and 5% by weight. The resulting nanocomposites were subjected to mechanical testing and were characterized using X-ray diffraction, scanning electron microscope, and transmission electron microscope. RESULTS: The statistical analysis showed that there was no significant increase in flexural strength within and between the groups. The most significant increase in surface hardness was observed between Group I (control) and Group II (1% nanoclay). Linear polymerization shrinkage of the specimens showed a significant decrease in the control and all the experimental groups. CONCLUSION: Addition of 1 wt% nanoclay to polymethyl methacrylate heat cure denture base material could enhance the surface hardness and reduce the linear polymerization shrinkage of the resin. However, there was no significant increase in flexural strength of the resulting nanocomposite.

RESUMEN

To assess the implant stability during different stages of healing in an immediate loaded implant soon after extraction. A 73-year-old female came with a chief complaint of bad smell and irritation in her lower front gum region. On examination, she was found to be completely edentulous in the maxillary arch and partially edentulous in the mandibular arch with only the canines present bilaterally. The posterior mandibular ridge was severely resorbed and hence could not be treated with a conventional mandibular complete denture. Considering the age of the patient and the preference of only a single surgical visit, we decided to plan for a conventional maxillary denture against an implant supported mandibular overdenture with two implants placed immediately after extraction of canines. The stability of these implants was assessed during the early phases of healing with the help of a resonance frequency analysis method (RFA) using Osstell ISQ™. During the healing phase, implant stability quotient (ISQ) values decrease by 4-5 values after installation with the lowest values at the 1st week postplacement. Following this, the ISQ values increased steadily for all implants up to 16 weeks. No significant differences were noted over time. At placement, the mean ISQ values at 33 and 43 regions were 74 and 75.2, respectively. The mean lowest ISQ values recorded at the 1st week were 58.8 and 65.4, respectively. At 16 weeks, the mean ISQ values were 70.5 and 67.9, respectively. The survival of such immediately placed implants, which are later used as overdenture supported implants, are highly predictable when the surgical and prosthetic part is done meticulously. However, there needs future studies oriented to understand better the healing pattern of immediately placed implants in extraction sockets, which would guide the clinician with the optimal loading time.

RESUMEN

Complete dentures are poorly tolerated in patients with xerostomia. A salivary reservoir can be incorporated into a denture that provides slow, sustained, and continuous release of salivary substitute. This article describes a simple, cost-effective, and innovative technique of fabrication and designing of functional maxillary salivary reservoir complete denture.

RESUMEN

To tackle a large midline diastema and generalized spacing existing before extraction often poses a challenge to the treating prosthodontist. The situation becomes even more complicated if the patient is a teenager, with multiple missing teeth, associated deep bite and where the jaw bone growth has not yet been completed. Possible treatment options would include a removable prosthesis, a fixed partial denture or an implant supported prosthesis. Treating such cases with a simple removable prosthesis cannot be justified if a deep bite existed which would result in posterior disocclusion. Also a conventional fixed partial denture or closure of the diastema with light cure composite (LCC), would result in a seemingly large tooth, which would be unaesthetic in appearance. Implant supported prosthesis is a possibility, if the patient's jaw bone growth has been completed. Another simple non-invasive solution to this problem would be to fabricate a non-rigid connector using loops. This presentation describes the procedure for fabrication of an interim loop connector for a 16 year old female patient who had lost one of her maxillary central incisors as a result of trauma. Patient also had multiple spacing in the maxillary anterior teeth and an associated deep bite. Her cephalogram revealed that she had a Class III skeletal pattern. A permanent treatment at this stage was not possible due to ontoward mandibular growth pattern as revealed on the cephalogram. Hence to dodge all these problems, a simple and non-invasive treatment using loop connectors was chosen till the growth period was completed.

Asunto(s)