RESUMEN
The reuse of waste materials has recently become appealing due to pollution and cost reduction factors. Using waste materials can reduce environmental pollution and product costs, thus promoting sustainability. Approximately 95% of calcium carbonate-containing waste eggshells end up in landfills, unused. These eggshells, a form of bio-waste, can be repurposed as catalytic electrode material for various applications, including supercapacitors, after being converted into CaO. Similarly, used waste battery electrode materials pose environmental hazards if not properly recycled. Various types of batteries, particularly lithium-ion batteries, are extensively used worldwide. The recycling of used lithium-ion batteries has become less important considering its low economic benefits. This necessitates finding alternative methods to recover and reuse the graphite rods of spent batteries. Therefore, this study reports the conversion of waste eggshell into calcium oxide by high-temperature calcination and extraction of nanographite from spent batteries for application in energy storage fields. Both CaO and CaO/graphite were characterized for their structural, morphological, and chemical compositions using XRD, SEM, TEM, and XPS techniques. The prepared CaO/graphite nanocomposite material was evaluated for its efficiency in electrochemical supercapacitor applications. CaO and its composite with graphite powder obtained from used lithium-ion batteries demonstrated improved performance compared to CaO alone for energy storage applications. Using these waste materials for electrochemical energy storage and conversion devices results in cheaper, greener, and sustainable processes. This approach not only aids in energy storage but also promotes sustainability through waste management by reducing landfills.
RESUMEN
Vickers indentation fracture can be used to estimate equibiaxial residual stresses (RS) in brittle materials. Previous, conceptually-equal, analytical models were established on the assumptions that (i) the crack be of a semi-circular shape and (ii) that the shape not be affected by RS. A generalized analytical model that accounts for the crack shape and its change is presented. To assess these analytical models and to gain detailed insight into the crack evolution, an extended finite element (XFE) model is established. XFE analysis results show that the crack shape is generally not semi-circular and affected by RS and that tensile and compressive RS have different effects on the crack evolution. Parameter studies are performed to calibrate the generalized analytical model. Comparison of the results calculated by the analytical models with XFE results reveals the inaccuracy inherent in the previous analytical models, namely the neglect of (the change of) the crack aspect-ratio, in particular for tensile RS. Previous models should therefore be treated with caution and, if at all, used only for compressive RS. The generalized model, on the other hand, gives a more accurate description of the RS, but requires the crack depth.