RESUMEN

The combined application of electric fields and ultrasonic waves has shown promise in controlling cell membrane permeability, potentially resulting in synergistic effects that can be explored in the biotechnology industry. However, further clarification on how these processes interact is still needed. The objective of the present study was to investigate the atomic-scale effects of these processes on a DPPC lipid bilayer using molecular dynamics simulations. For higher electric fields, capable of independently forming pores, the application of an ultrasonic wave in the absence of cavitation yielded no additional effects on pore formation. However, for lower electric fields, the reduction in bilayer thickness induced by the shock wave catalyzed the electroporation process, effectively shortening the mean path that water molecules must traverse to form pores. When cavitation was considered, synergistic effects were evident only if the wave alone was able to generate pores through the formation of a water nanojet. In these cases, sonoporation acted as a mean to focus the electroporation effects on the initial pore formed by the nanojet. This study contributes to a better understanding of the synergy between electric fields and ultrasonic waves and to an optimal selection of processing parameters in practical applications of these processes.

Asunto(s)

RESUMEN

The present work evaluated the ultrasound (US) effects on the growth of Pseudoneochloris marina and Chlorella zofingiensis. For P. marina, US treatment did not increase cell proliferation and reduced cell density when used for 60 min (exponential phase, for 5 days), indicating a possible occurrence of cell damage. For C. zofingiensis, the application of discontinuous US for 10 min resulted in an increase of 65 % in biomass concentration compared to the control. These distinct behaviors indicate that microalgae species react differently to physical stimuli. After US treatment, a reduction of carotenoid, chlorophyll, lipid and protein concentrations was observed, which may be related to changes in the metabolic pathways to produce these compounds. Overall, the results of the present study show the potential of discontinuous US to enhance microalgae cell proliferation.

Asunto(s)

RESUMEN

Electroporation is a cell-level phenomenon caused by an ionic imbalance in the membrane, being of great relevance in various fields of knowledge. A dependence of the pore formation kinetics on the environmental conditions (temperature and pressure) of the cell membrane has already been reported, but further clarification regarding how these variables affect the pore formation/resealing dynamics and the transport of molecules through the membrane is still lacking. The objective of the present study was to investigate the temperature (288-348 K) and pressure (1-5000 atm) effects on the electroporation kinetics using coarse-grained molecular dynamics simulations. Results shown that the time for pore formation and resealing increased with pressure and decreased with temperature, whereas the maximum pore radius increased with temperature and decreased with pressure. This behavior influenced the ion migration through the bilayer, and the higher ionic mobility was obtained in the 288 K/1000 atm simulations, i.e., a combination of low temperature and (not excessively) high pressure. These results were used to discuss some experimental observations regarding the extraction of intracellular compounds applying this technique. This study contributes to a better understanding of electroporation under different thermodynamic conditions and to an optimal selection of processing parameters in practical applications which exploit this phenomenon.

Asunto(s)

RESUMEN

Fungal spoilage in fruit juices is a currently relevant issue considering that recent reports have found unacceptable fungal levels even after traditional pasteurization processes. Ohmic heating demonstrated to be a good alternative process to conventional pasteurization, as it can promote higher heating rates and additional cell damage in some scenarios (nonthermal effects). However, the application of ohmic processing for fungi inactivation has not been properly investigated. The objective of this study was to analyze the inactivation of Aspergillus fumigatus, a highly distributed fungi species, in apple juice by ohmic and conventional heating at 75, 80, 85, 90 and 94 °C. Predictive primary and secondary models were fitted and the Weibull-Mafart models were the most accurate to describe the experimental behavior considering the statistical indices applied. Statistical differences between both thermal processes were found in the three lower analyzed temperatures (75, 80 and 85 °C), which is possibly related to nonthermal effects. When ohmic heating was applied, processing time was up to 23% shorter. The resulted model was successfully validated in two distinct temperatures (83 and 92 °C) and could be applied to obtain adequate processing times for apple juice pasteurization. This study contributes to deepen the knowledge concerning the use of ohmic heating for fungi inactivation.

Asunto(s)

RESUMEN

The present work evaluated the use of ultrasound to extract sequentially phenolics and pectin from mango peel. Initially, the influence of ethanol and ultrasound on the phenolics extraction was investigated. The results showed that the ultrasound did not affect the extraction yield of these compounds. The best total phenolics yield (67%) was obtained with an extraction solution consisting of 50% of ethanol in water (v/v) and without ultrasound application, according to the experimental design. As an innovative extraction methodology, the residue of this extraction was then used to extract pectin assisted by ultrasound. The use of ultrasound increased over than 50% of the pectin extraction yield and did not affect its quality, measured by the galacturonic acid content and the degree of esterification. The sequential extraction of phenolics and pectin shows to be an alternative to use the whole residue from mango peel.

Asunto(s)

RESUMEN

The present work aimed to evaluate glycerol, maltodextrin, polydextrose and sorbitol for the osmotic dehydration of yacon for diabetics, keeping its properties as prebiotic. Osmotic dehydration was carried out using a yacon to 33% concentrated syrup weight ratio of 1:12, with magnetic stirring at 23ºC and atmospheric pressure. The best results were achieved for glycerol and sorbitol with 80 ± 4% and 81± 1% of water removal and increase of 3.73 ± 0.11 and 4.30 ± 0.16 times in total soluble solids respectively. Maltodextrin did not promote dehydration.

RESUMEN

In this work, the influence of the electric field frequency and solids content on the degradation kinetics of ascorbic acid during ohmic heating of acerola pulp and acerola serum was investigated. The degradation percentage of ascorbic acid in the pulp after 120 min of heating varied between 12 and 17%. For the serum, the degradation percentage was in the range of 13 and 18%. The results were fitted to the first-order model, and the kinetic rate constants ranged from 1.1 to 1.6×10(-3) min(-1) and from 1.1 to 1.5×10(-3) min(-1) for pulp and serum, respectively. D values ranged between 1480 and 2145 min for the pulp and between 1524 and 1951 min for the serum. A distinct behavior between the kinetic parameters of the pulp and serum in electric field frequencies ranging from 10 to 1000 Hz indicates that the presence of distinct amounts and types of solids might affect the rate of the electron transfer in electrochemical reactions. These variables may also affect the polarization process stimulated by the oscillating electric field. The non-achievement of the equilibrium of the polarization process may have an influence on oxidation reactions, affecting the predisposition to hydrogen donation from the ascorbic acid molecule.

Asunto(s)

RESUMEN

No desenvolvimento de produtos, é de suma importância o conhecimento da influência das modificações da formulação nas propriedades sensoriais, físicas e químicas destes. O objetivo deste trabalho foi caracterizar sobremesas à base de soja com e sem adição de mucilagem de chia, utilizada como espessante alimentar. As formulações foram caracterizadas quanto as suas propriedades reológicas, °Brix, pH e cor. O perfil sensorial foi determinado por Análise Descritiva Quantitativa (ADQ), utilizando-se uma equipe de 10 julgadores treinados. Os resultados mostraram que as amostras não diferiram quanto aos valores de pH, °Brix e coordenada cromática a*. Quanto aos outros parâmetros de cor e reológicos, foram detectadas diferenças significativas entre as amostras, o que mostra a influência do tipo de espessante nestas características. Os resultados da ADQ mostraram que as amostras não apresentaram diferenças estatísticas quanto aos atributos, cor rosa, sabor de goiaba, sabor de soja e cremosidade, porém diferiram quanto à consistência. Com isso, conclui-se que a adição da mucilagem de chia pode ser feita sem causar grandes modificações ao produto.

In product development is important to study the influence of ingredients in the physical, chemical and sensory properties of the product. The aim of this study was to characterize soy-based desserts with and without addition of chia mucilage, used as food thickener. The formulations were characterized for their rheological properties, °Brix, pH and color. The sensory profile was determined by Quantitative Descriptive Analysis (QDA) using 10 trained judges. The results regarding to pH, ° Brix and color coordinate a* did not differ. Unlike these parameters, the other chromaticity coordinates and the rheological properties presented significant statistical differences between the samples. The QDA results showed that the samples did not differ as to the attributes, color, pink guava flavor, creaminess and flavor of soy, but differed in consistency. Thus, it is concluded that the addition of mucilage chia can be made without causing major changes to the product.

RESUMEN

No desenvolvimento de produtos, é de suma importância o conhecimento da influência das modificações da formulação nas propriedades sensoriais, físicas e químicas destes. O objetivo deste trabalho foi caracterizar sobremesas à base de soja com e sem adição de mucilagem de chia, utilizada como espessante alimentar. As formulações foram caracterizadas quanto as suas propriedades reológicas, °Brix, pH e cor. O perfil sensorial foi determinado por Análise Descritiva Quantitativa (ADQ), utilizando-se uma equipe de 10 julgadores treinados. Os resultados mostraram que as amostras não diferiram quanto aos valores de pH, °Brix e coordenada cromática a*. Quanto aos outros parâmetros de cor e reológicos, foram detectadas diferenças significativas entre as amostras, o que mostra a influência do tipo de espessante nestas características. Os resultados da ADQ mostraram que as amostras não apresentaram diferenças estatísticas quanto aos atributos, cor rosa, sabor de goiaba, sabor de soja e cremosidade, porém diferiram quanto à consistência. Com isso, conclui-se que a adição da mucilagem de chia pode ser feita sem causar grandes modificações ao produto.(AU)

In product development is important to study the influence of ingredients in the physical, chemical and sensory properties of the product. The aim of this study was to characterize soy-based desserts with and without addition of chia mucilage, used as food thickener. The formulations were characterized for their rheological properties, °Brix, pH and color. The sensory profile was determined by Quantitative Descriptive Analysis (QDA) using 10 trained judges. The results regarding to pH, ° Brix and color coordinate a* did not differ. Unlike these parameters, the other chromaticity coordinates and the rheological properties presented significant statistical differences between the samples. The QDA results showed that the samples did not differ as to the attributes, color, pink guava flavor, creaminess and flavor of soy, but differed in consistency. Thus, it is concluded that the addition of mucilage chia can be made without causing major changes to the product.(AU)

Asunto(s)

RESUMEN

Degradation kinetics of monomeric anthocyanins in acerola pulp during thermal treatment by ohmic and conventional heating was evaluated at different temperatures (75-90°C). Anthocyanin degradation fitted a first-order reaction model and the rate constants ranged from 5.9 to 19.7 × 10(-3)min(-1). There were no significant differences between the rate constants of the ohmic and the conventional heating processes at all evaluated temperatures. D-Values ranged from 116.7 to 374.5 for ohmic heating and from 134.9 to 390.4 for conventional heating. Values of the free energy of inactivation were within the range of 100.19 and 101.35 kJ mol(-1). The enthalpy of activation presented values between 71.79 and 71.94 kJ mol(-1) and the entropy of activation ranged from -80.15 to -82.63 J mol(-1)K(-1). Both heating technologies showed activation energy of 74.8 kJ mol(-1) and close values for all thermodynamic parameters, indicating similar mechanisms of degradation.

Asunto(s)

RESUMEN

Native and hydrolyzed pinhão starches were used as coating materials for ß-carotene microencapsulation by freeze-drying. The purpose of the present study was to evaluate the stability of ß-carotene encapsulated under three different conditions: in the presence of ultraviolet light at 25±2 °C, in the dark at 25±2 °C and in the dark at 10.0±0.2 °C. The color of the samples was also analyzed. Microcapsules prepared with native starch showed the lowest stability during storage. In contrast, microcapsules encapsulated with 12 dextrose equivalent (DE) hydrolyzed starch exhibited the highest stability. First-order kinetic and Weibull models were applied to describe the degradation of ß-carotene over time. The R(2) values of the Weibull model were greater than those of the first-order kinetic model. Moreover, multivariate analyses (principal component and cluster analyses) were also conducted.

Asunto(s)

RESUMEN

The kinetics of anthocyanin degradation in blueberry juice during thermal treatment at 40, 50, 60, 70, and 80 degrees C were investigated in the present study. Anthocyanin degradation was analyzed up to the level of 50% retention using a pH differential method. The degradation of anthocyanin at each temperature level followed a first-order kinetic model, and the values of half-life time (t(1/2)) at temperatures of 40, 50, 60, 70, and 80 degrees C were found to be 180.5, 42.3, 25.3, 8.6, and 5.1 h, respectively. The activation energy value of the degradation of the 8.9 degrees Brix blueberry juice during heating was 80.4 kJ.mol(-1). The thermodynamic functions of activation (DeltaG, DeltaH, and DeltaS) have been determined as central to understanding blueberry degradation.

Asunto(s)