RESUMEN

This work presents a new extraction material, namely, Q-100, based on hypercrosslinked magnetic particles, which was tested in dispersive solid-phase extraction for a group of sweeteners from environmental samples. The hypercrosslinked Q-100 magnetic particles had the advantage of suitable pore size distribution and high surface area, and showed good retention behavior toward sweeteners. Different dispersive solid-phase extraction parameters such as amount of magnetic particles or extraction time were optimized. Under optimum conditions, Q-100 showed suitable apparent recovery, ranging in the case of river water sample from 21 to 88% for all the sweeteners, except for alitame (12%). The validated method based on dispersive solid-phase extraction using Q-100 followed by liquid chromatography with tandem mass spectrometry provided good linearity and limits of quantification between 0.01 and 0.1 µg/L. The method was applied to analyze samples from river water and effluent wastewater, and four sweeteners (acesulfame, saccharin, cyclamate, and sucralose) were found in both types of sample.

Asunto(s)

RESUMEN

Thirdhand tobacco smoke (THS) constitutes a poorly understood pathway of exposure of non-smokers, especially toddlers, to tobacco-related carcinogens. However, to date most of the carcinogens present in tobacco smoke have not been detected in THS and, therefore, the significance of THS health risk is still unknown. In this study, we have compared the performance of two analytical methods - one based on gas chromatography coupled to ion trap mass spectrometry detection (GC-IT-MS) and the other on comprehensive two-dimensional gas chromatography coupled to a nitrogen chemiluminescence detector (GC×GC-NCD) - for simultaneously determining, in settled house dust, the presence of 16 organic nitrogen carcinogens already detected in tobacco smoke. The target compounds included four aromatic amines, two nitrocompounds, eight N-nitrosamines and two tobacco-specific nitrosamines, as well as nicotine as a tobacco marker. Dust samples were extracted using in-cell clean up pressurized liquid extraction with silica as clean up sorbent and ethyl acetate as the organic solvent, with average recovery of 89%. Although GC-IT-MS, using chemical ionization with methanol and tandem MS, performed well, the optimized GC×GC-NCD gave lower limits of detection (from 4 to 22ngg(-1)) and better repeatability and reproducibility a low concentration levels (%RSD<8%) and, therefore, was applicable for determining these different groups of carcinogens without the need for derivatization prior to the GC analysis. The performance of the optimized PLE/GC×GC-NCD method was tested by quantifying the target compounds in house dust samples from smokers' and non-smokers' homes. The median carcinogen compounds detected was 3.8µgg(-1) and 1.1µgg(-1) in smokers' and non-smokers' house dust, respectively. In this study, we have detected highly carcinogenic aromatic amines and nitro compounds for the first time in settled house dust complementing the state of knowledge of THS composition and providing fresh evidence about THS health risks.

Asunto(s)

RESUMEN

In order to assess the environmental risks of a compound it is imperative to have suitable and reliable techniques for its determination in environmental matrices. In this paper, we focused on a method development for the recently introduced online coupling of a field flow fractionation (FFF) system to an Orbitrap-HRMS, that allows the simultaneous size and concentration determination of different aqueous fullerene aggregates and their concentrations in different size fractions. A 0.05% NH4OH solution in water was identified as the best carrier liquid for the analysis of the three different aqueous fullerene suspensions (C60 [60], [6,6]-phenyl-C61 butyric acid methyl ester ([60]PCBM) and [6,6]-(bis)phenyl-C61 butyric acid methyl ester ([60]bisPCBM)). The multi-angle light scattering (MALS) data received after employing the ammonia solution was consistent with both the theory and calibration using well defined Au and latex particles. The LODs obtained using Orbitrap HRMS detection were 0.1 µg L(-1) for an injection volume of 100 µL which are significantly better than the LODs obtained by using UV (20 µg L(-1)) and MALS detectors (5 µg L(-1)). However, these LODs can be further improved as in theory there is no limit to the amount of sample that can be injected into the FFF. Environmental samples (river and sewage water) were spiked with fullerenes and the fractograms obtained for these samples revealed that the matrix does affect the size of fullerene aggregates. Information on the size distribution can be useful for the risk assessment of these particles.

Asunto(s)

RESUMEN

In addition to passive inhalation, non-smokers, and especially children, are exposed to residual tobacco smoke gases and particles that are deposited to surfaces and dust, known as thirdhand smoke (THS). However, until now the potential cancer risks of this pathway of exposure have been highly uncertain and not considered in public health policy. In this study, we estimate for the first time the potential cancer risk by age group through non-dietary ingestion and dermal exposure to carcinogen N-nitrosamines and tobacco-specific nitrosamines (TSNAs) measured in house dust samples. Using a highly sensitive and selective analytical approach we have determined the presence of nicotine, eight N-nitrosamines and five tobacco-specific nitrosamines in forty-six settled dust samples from homes occupied by both smokers and non-smokers. Using observations of house dust composition, we have estimated the cancer risk by applying the most recent official toxicological information. Calculated cancer risks through exposure to the observed levels of TSNAs at an early life stage (1 to 6years old) exceeded the upper-bound risk recommended by the USEPA in 77% of smokers' and 64% of non-smokers' homes. The maximum risk from exposure to all nitrosamines measured in a smoker occupied home was one excess cancer case per one thousand population exposed. The results presented here highlight the potentially severe long-term consequences of THS exposure, particularly to children, and give strong evidence of its potential health risk and, therefore, they should be considered when developing future environmental and health policies.

Asunto(s)

RESUMEN

A Quick, Easy, Cheap, Effective, Rugged and Safe (QuEChERS) extraction method followed by liquid chromatography-(Orbitrap) high resolution mass spectrometry was developed for the simultaneous determination of five benzotriazole, four benzothiazole and five benzenesulfonamide derivates in sewage sludge. While the method was being developed, several buffers and dispersive solid-phase extraction clean-up (dSPE) sorbents were tested. Citrate buffer and Z-sep+ (zirconium-based sorbent) were the most effective extraction buffer and dSPE clean-up material. The absolute recoveries were higher than 80% for all compounds (100ng/g (d.w.)) and the matrix effect was less than -20% for most compounds. The limits of detection were between 0.5 and 10ng/g (d.w.) and the limits of quantification (LOQ) were between 1 and 25ng/g (d.w.). Repeatability and reproducibility were lower than 15% (%RSD, n=5). Several sludge samples from five sewage treatment plants in Catalonia were analysed and the most abundant compounds were 2-hydroxybenzothiazole (

Asunto(s)

RESUMEN

This study describes the development of an analytical method based on active collection in a multisorbent Tenax TA/Carbograph 1TD tube, followed by thermal desorption and GC-MS for the determination of 16 volatile organic compounds in air samples. The analyzed compounds include ozone precursors and odor-causing compounds belonging to different chemical families (sulfur- and nitrogen-containing compounds, aldehydes, and terpenes). Two types of sorbents were tested and desorption conditions (temperature, time, and sampling, and desorption flow) were evaluated. External calibration was carried out using the multisorbent bed. Method detection limits in the range 0.2-2.0 µg m(-3) for 1 L samples were obtained. The method was applied for determining the target compounds in air samples from two different wastewater treatment plants. Most compounds were detected and toluene, limonene, and nonanal were found in particularly high concentrations with maximum values of 438, 233, and 382 µg m(-3), respectively.

Asunto(s)

RESUMEN

This study presents a fully automated method based on on-line solid-phase extraction coupled to liquid chromatography with mass spectrometry detection (on-line-SPE-LC-MS) to determine illicit drugs in environmental water samples. The mixed-mode Oasis WCX sorbent used in an optimised protocol allows the addition of an effective washing step with 0.5 mL of methanol, which washed out all the interferences retained by reversed-phase interactions and helped to reduce the matrix effect, while the cationic target analytes remained bound and could then be selectively eluted with recovery values near to 100%. This method was successfully applied to the analysis of 10 mL of environmental water (river and sewage) spiked at low ng L(-1) levels of the analytes, with recoveries from 50 to 100% for all studied analytes. The method was also validated with river water samples with figures of merit comparable to those of the off-line SPE-LC-MS/MS method.

Asunto(s)

RESUMEN

In this study, the dietary intake of 16 polycyclic aromatic hydrocarbons (PAHs) by the population of Tarragona County (Catalonia, Spain) was assessed using the duplicate diet approach. Duplicate diet samples, prepared as per consumption, were collected during September 2010 in various restaurants offering a variety of daily menus (breakfast, lunch, and dinner). For analysis of PAHs, a total of 90 composite samples were prepared. Analytical procedure of PAHs was performed by means of gas chromatography/mass spectrometry. Intake calculations were made for the standard male adult population. The highest intakes corresponded to acenaphthylene (12.7 µg/day), acenaphthene (12.4 µg/day), and fluorene (11.9 µg/day), while the lowest intake corresponded to dibenz[a,h]anthracene (0.12 µg/day), being also comparatively low those of pyrene, benzo[b]fluoranthene+benzo[j]fluoranthene, benzo[a]pyrene and benzo[ghi]perylene (0.13 µg/day in all cases). The results were compared with data from previous total diet studies (TDS) recently performed in the same geographical area. In the present study, the estimated mean dietary intake for a standard male adult living in Catalonia was 59.2 µg/day, a value notably higher than that found in our recent TDS (6.72 µg/day). However, it is essential to remark that important methodological differences exist between both surveys, reflecting that calculation methods should be similar when the purpose is to compare results from different surveys. In general terms, we conclude that for PAHs, duplicate diet studies may be a good alternative to total diet studies, especially when there are important economical limitations to perform a suitable TDS. The costs associated to the former may be notably lower, as they do not require such an extensive number of samples for chemical analysis. Moreover, a duplicate diet approach may even be more realistic, as cooked foodstuffs are used for dietary exposure assessment.

Asunto(s)

RESUMEN

Two novel high-specific surface area polymeric sorbents (HXLPP-SAXa and HXLPP-SAXb) were synthesised and evaluated as solid-phase extraction sorbents. The novel sorbents under study are based on hypercrosslinked polymer microspheres and designed specifically to offer ion-exchange properties; the specific polymers of interest in the current work have been chemically modified in such a way as to impart a tuneable level of strong anion-exchange character onto the sorbents. The novel sorbents were applied as strong anion-exchange sorbents in solid-phase extraction studies, with the goal being to selectively extract a group of acidic compounds from complex environmental samples in an efficient manner. Out of two HXLPP-SAX resins evaluated in this study, it was found that the sorbent with the lower ion-exchange capacity (HXLPP-SAXa) gave rise to the best overall performance characteristics and, indeed, was found to compare favourably to the solid-phase extraction performance of commercial strong anion-exchange sorbents. When the HXLPP-SAXa sorbent was applied to the solid-phase extraction of environmental water samples, the result showed quantitative and selective extraction of low levels of acidic pharmaceuticals from 500 mL of river water and 100 mL of effluent wastewater.

Asunto(s)

RESUMEN

Two imidazolium supported ionic liquid phases (SILPs) containing different anions, trifluoromethanesulphonate [CF(3)SO(3)(-)], and tetrafluoroborate [BF(4)(-)], were synthesized and evaluated as solid-phase extraction sorbents for extracting acidic pharmaceuticals from aqueous samples under strong anion-exchange conditions, which include an effective cleanup of the sample. The best SILP material [MI(+)][CF(3)SO(3)(-) ] was selected and successfully applied to the determination of acidic pharmaceuticals in different types of water samples (river water and effluent wastewater). The results were then compared to the previously synthesized SILP material based on [MI(+)][CF(3)COO(-)] and the commercially available Oasis MAX sorbent.

Asunto(s)

RESUMEN

A novel, highly selective method for the determination of nicotine, N-nitrosamines and tobacco-specific nitrosamines (TSNAs) in indoor dust samples is presented in this study. Samples were extracted by in-cell clean-up pressurized liquid extraction (PLE) that allows high extraction efficiency with moderate consumption of organic solvents. The extracts were analyzed by comprehensive gas chromatography and detected with a nitrogen chemiluminiscence detector (GC×GC-NCD) that provided enhanced selectivity and sensitivity for organic nitrogen containing compounds. Method validation showed good linearity, repeatability and reproducibility (%RSD<8%). Recovery was higher than 80% for most target compounds and limits of detection lower than 16 ng g(-1). The method was used for the determination of the nitrosamine target compounds in house dust samples from both smoking and non-smoking households. All the analytes were found in the samples, nicotine being the most abundant compound in smokers' dust and one of the most abundant in non-smokers' dust. To our knowledge this is the first time that volatile N-nitrosamines and TSNAs have been determined in indoor dust samples. The results demonstrate the presence of these highly carcinogenic compounds in house dust, with inherent human exposure through inhalation and/or involuntary ingestion of house dust.

Asunto(s)

RESUMEN

The present study describes the first fully automated method based on on-line solid-phase extraction (SPE) coupled to hydrophilic interaction chromatography-electrospray-mass spectrometry (HILIC-(ESI)MS) to determine a group of polar drugs that includes illicit drugs (such as cocaine, morphine, codeine and metabolites) and pharmaceuticals in environmental water samples. The SPE was performed using a highly retentive polymeric sorbent. The HILIC separation was optimised and the initial high organic content of the chromatographic mobile phase, was also suitable for the proper on-line elution of the analytes retained in the SPE column and for enhancing the ESI ionisation efficiency. This method allows the loading of samples of up to 250ml of ultrapure water or 10ml of environmental water samples spiked at low ngl(-1) levels of the analytes. The method yields near 100% recoveries for all the analytes. The method was also validated with environmental water samples with linear ranges from 5 to 1000ngl(-1) and limits of detection ≤2ngl(-1) for most of the compounds.

Asunto(s)

RESUMEN

A mixed-mode polymeric sorbent was on-line coupled to liquid chromatography (LC) for the first time and applied to the selective solid-phase extract a group of pharmaceuticals in complex environmental water samples. The mixed-mode polymeric sorbent is a high-specific surface area hypercrosslinked polymer resin (HXLPP) in the form of monodisperse microspheres further modified with 1,2-ethylenediamine (EDA) moieties. These properties allow its application as a weak anion-exchange (WAX) sorbent in the on-line solid-phase extraction (SPE) coupling. The on-line SPE-LC method developed using the HXLPP-WAX sorbent was successfully applied to percolate a large volume of ultrapure (500 ml), river (250 ml) and effluent sewage (100 ml) water samples. In all the cases, the HXLPP-WAX resin provided near total recoveries of the most acidic compounds studied and clean chromatograms. This is because the ion-exchange interactions enable a washing step to be added to the SPE protocol that removes the compounds with weak acidic, neutral and basic properties from the sample matrix.

Asunto(s)

RESUMEN

In the present paper, we describe the synthesis of a cephalexin (CFX) molecularly imprinted polymer (MIP), the direct application of the MIP to SPE for the determination of CFX (which is a beta-lactam antibiotic) in human urine and the use of the MIP in a tandem SPE system to determine CFX in river water. The molecularly imprinted polymers (MIP) showed cross-selectivity for amoxicillin (AMX; also a beta-lactam antibiotic). This allowed both CFX and AMX to be quantified in acidified human urine, with recoveries of 78 and 60% for CFX and AMX, respectively, when the urine samples were spiked with CFX and AMX at 4 mg/L. These analyses were facile because the molecularly imprinted solid-phase extraction (MISPE) extracts were clear compared to the nonpurified samples. In order to increase the sample volume for river water analyses, a tandem SPE system incorporating a commercially available sorbent was implemented. With this set-up, CFX was determined with recoveries in excess of 50% when 200 mL of acidified river water samples spiked at 10 microg/L with CFX were percolated through the tandem system.

Asunto(s)

RESUMEN

This study reports a material that is based on the concept of ionic liquid analogue: a slightly crosslinked polymer-supported imidazolium trifluoroacetate salt (IL-CF(3)COO(-)) that favorably combines the properties of ionic liquids (ILs) and the advantages of a solid support. The ionic liquid-supported material was evaluated for the first time as a solid-phase extraction (SPE) sorbent for selectively and quantitatively extracting pharmaceuticals from aqueous samples. The novel IL-CF(3)COO(-) was evaluated under reversed-phase (RP), weak anion exchange (WAX), strong anion exchange (SAX) and strong cation exchange (SCX) SPE procedures, and we found that SAX conditions are the most suitable for investigating the behaviour of the IL-CF(3)COO(-) material. Under SAX conditions, the IL-CF(3)COO(-) material was capable of selectively and quantitatively extracting a group of acidic compounds from aqueous samples, while washing basic analytes that were also present in the sample. The SPE method using IL-CF(3)COO(-) material was used to analyse 1000 ml of different aqueous samples (ultrapure, tap and river) with complete recovery of the acidic compounds studied. Moreover, the method provided clean chromatogram and high recoveries when percolating complex real samples, such as 1000 ml of river water and 250 ml of effluent wastewater from a sewage treatment plant spiked at low levels with the analytes studied.

Asunto(s)

RESUMEN

In this paper we describe, for the first time, a molecularly imprinted polymer (MIP) for the antibiotic amoxicillin (AMX), synthesised by a noncovalent molecular imprinting approach and used to extract AMX selectively from urine samples. The MIP was applied as a molecularly selective sorbent in molecularly imprinted SPE (MISPE) in an off-line mode, where it showed useful cross-selectivity for a structurally related antibiotic, cephalexin (CPX). By using a MISPE protocol, the MIP was able to selectively extract both AMX and CFX from 5 mL of water spiked with 10 mg/L with recoveries of 75 and 78% for AMX and CFX, respectively. When applied to real samples (urine) at clinically relevant concentrations, recoveries from 2 mL of human urine spiked with 20 mg/L decreased slightly to 65 and 63% for AMX and CFX, respectively. To demonstrate further the selectivity of the MIP obtained, a comparison with commercially available SPE cartridges was performed. Improvements in the retention of both AMX and CFX on the MIP were obtained relative to the commercially available cartridges, and the MISPE extracts were considerably cleaner, due to molecularly selective analyte binding by the MIP.

Asunto(s)

RESUMEN

A molecularly imprinted polymer (MIP) has been prepared for the first time with ciprofloxacin (CIPRO) as the template molecule, via a noncovalent synthetic procedure. Prior to its use as a sorbent in SPE, the MIP was evaluated chromatographically to confirm that it was indeed molecularly imprinted. The MIP was then used to extract CIPRO selectively from urine samples by means of a two-step SPE procedure in which a commercial Oasis cartridge and a molecularly imprinted SPE cartridge were combined in series. This approach allowed the matrix compounds present in the samples to be removed effectively. The urine extracts obtained after this two-step SPE procedure was applied were relatively clean compared to the original samples, and this made it possible to inject directly the extracts into a mass spectrometer and thus quantify CIPRO in urine samples at low levels and reduce the time of analysis.

RESUMEN

A molecularly imprinted polymer (MIP) is synthesised by a noncovalent protocol in which ibuprofen was used as a template molecule. The polymer was evaluated chromatographically and it was seen that the MIP showed cross-reactivity. Subsequently, when this polymer was used as sorbent in SPE it was possible to selectively extract a mixture of nonsteroidal anti-inflammatory drugs from aqueous samples when a cleanup step with dichloromethane was performed. The performance of the MIP was evaluated with river water and water from a wastewater treatment plant, and compared with the performance of a commercial Isolute ENV+ sorbent.

Asunto(s)

RESUMEN

We monitored 26 compounds known or suspected to be endocrine disruptors in several environmental water samples from a river, the sea, and an irrigation canal. Because of the various chemical properties of the compounds monitored, analyses were carried out by using two different methods. One method is based on solid-phase extraction (SPE) on-line coupled to gas chromatography-mass spectrometry through an on-column interface. Another is based on high-performance liquid chromatography-(electrospray) mass spectrometry working in negative ionization mode and using off-line SPE. The limits of detection for the two methods were at levels of low microg/L. Phthalates and bis-(2-ethylhexyl) adipate were found at levels between 0.05 and 13 microg/L in all of the water samples analyzed. Some pesticides, alkylphenols, and estrogens were determined in a few samples at levels below 0.1 microg/L.

Asunto(s)

RESUMEN

A non-covalent molecularly imprinted polymer (MIP) was synthesised using naproxen (a non-steroidal, anti-inflammatory drug (NSAID)) as a template molecule. The MIP was chromatographically evaluated to confirm the imprinting effect, and was then applied as a selective sorbent in solid-phase extraction (SPE) to selectively extract naproxen. After this study, the MIP was used to extract naproxen from urine samples; it was demonstrated that by applying a selective washing step with acetonitrile (ACN) the compounds in the sample that were structurally related to naproxen could be eliminated.

Asunto(s)