RESUMEN

Characterising pesticide residues from a qualitative and quantitative point of view is key to both risk assessment in the framework of pesticide approval and risk management. In the European Union (EU), these concerns are addressed during the evaluation of active substances at the European level prior to marketing authorisation. In the framework of this review, we will focus on one specific item of the residue section, namely the effect of process (industrial or domestic transformation of the raw commodities) on the nature of the residue in food. A limited number of hydrolysis conditions defined by three parameters (temperature, pH and time) are set to be "representative of the most widely used industrial and domestic food processing technologies". These hydrolysis conditions, however, do not cover processes at temperatures higher than 120 °C, such as cooking with a conventional oven or in a pan, frying or using a microwave oven.

Asunto(s)

RESUMEN

The surface functionalization of silver nanoparticles (NPs) by Raman reporters has stimulated a wide interest in recent years for the design of Surface-Enhanced Raman Spectroscopy (SERS) labels. However, silver NPs are prone to oxidation and aggregation, which strongly limits their applications. The design of stable SERS tags based on Ag NPs still represents a major challenge for Raman bioimaging. We address this issue herein by taking advantage of aryl diazonium salt chemistry to obtain stable Ag NPs functionalized by multifunctional polyaryl layers bearing different Raman reporters (-NO2, -CN, -CCH). The resulting SERS-encoded Ag NPs were characterized by UV-vis absorption, transmission electron microscopy (TEM) and SERS. The formation of multilayers at the surface of Ag NPs gives access to new spectrally distinguishable SERS codes thus broadening the library of available Raman tags. Proof-of-concept Raman imaging experiments were performed on cancer cells (HeLa) after NP uptake, highlighting the large potentials of diazonium salt chemistry to design Ag NPs-based SERS labels for Raman bioimaging.

Asunto(s)

RESUMEN

This scientific data article is related to the research work entitled "Non-Covalent functionalization of Single Walled Carbon Nanotubes with Fe-/Co-porphyrin and Co-phthalocyanine for Field-Effect Transistor Applications" published in "Organic electronics" (10.1016/j.orgel.2021.106212). In this work, we present the data of morphological, chemical and structural analyses of non-covalent functionalization of SWNTs with Co-porphyrin and Co-phthalocyanine. The analyses were performed by Raman spectroscopy, transmission electron microscopy as well as the electrical characterization of CNTFETs. This work is completed by the data of the theoretical calculations performed using Density Functional Theory (DFT).

RESUMEN

This work reports for the first time a straightforward and efficient approach to covalent surface functionalization of a sustainable graphene-like nanomaterial with abundant carboxylic acid groups. This approach results in an efficient and robust chelatant platform for anchoring highly dispersed ultrasmall palladium particles with excellent catalytic activity in the reduction of both cationic (methylene blue, MB) and anionic (eosin-Y, Eo-Y) toxic organic dyes. The large-specific-surface-area (SBET = 266.94 m2/g) graphene-like nanomaterial (GHN) was prepared through a green and cost-effective pyrolysis process from saccharose using layered bentonite clay as a template. To introduce a high density of carboxylic acid functions, GHN was first doubly functionalized by successive grafting reaction using two different strategies: (i) in the first case, GHN was first grafted by (3-glycidyloxypropyl) trimethoxysilane (GPTMS) and then bifunctionalized by chemical grafting of tris(4-hydroxyphenyl)methane triglycidyl ether (TGE). In the second case, the grafting order of the two molecules has been reversed. GHN-GPTMS-TGE provided the highest number of grafted reactive epoxy groups, and it was selected for further functionalization with carboxylic acid functions via a ring-opening reaction through a two-step hydrolysis (H2SO4)/oxidation (KMnO4) approach. The GHN nanomaterial bearing carboxylic acid groups was then treated with sodium hydroxide to produce a deprotonated carboxylic acid-rich platform. Finally, due to a high density of accessible chelatant carboxylic acid groups, GHN-COO- binds strongly a great amount of Pd2+ ions to form stable complexes which after reduction by NaBH4 leads to highly dispersed, densely anchored, and uniformly distributed nanoscale Pd particles (d ∼ 4.5 nm) on the surface of the functionalized GHN. The GHN-COO-@PdNPs nanohybrid proved to be highly efficient for dye reduction by NaBH4 in aqueous solution at room temperature. Moreover, because of the high stability of the as-prepared graphene-like supported PdNPs, it exhibited very good reusability and could be recycled up to eight times without any significant loss in activity.

RESUMEN

Surface-enhanced Raman scattering (SERS) tags are usually prepared by immobilizing Raman reporters on plasmonic nanoparticles (NPs) via thiol-based self-assembled monolayers. We describe here the first example of SERS tags obtained by combining gold NPs and aryl diazonium salts. This strategy results in robust Au-C covalent bonds between the Raman reporter and the NPs, thus ensuring a high stability of the nanohybrid interface.

RESUMEN

Nanometer-scale multilayered coatings were prepared by sequential surface reactions on gold plates. First 4-ethynylphenyl organic layer was electrografted from the parent diazonium tetrafluoroborate salt providing reactive alkynylated gold plate (Au-Y). The latter served for clicking mercaptosilane via a thiol-yne photo-triggered reaction to obtain alkoxysilane-functionalized surface. The trialkoxysilane top groups in turn served as anchor sites for the final sol-gel coating resulting from the surface reaction between aminopropylsilane and tetraethoxysilane (TEOS). It is demonstrated that two coupling agents, namely, aryl diazonium salt and silane, can be coupled using photo-triggered thiol-yne click reaction, resulting in robust multilayered coatings. In addition, the process is versatile in that it offers the possibility to design patterned surfaces. The top sol-gel layer can in turn be reacted with aminosilane, therefore providing a reactive and functional surface that can be used for different applications given the reactivity of amine groups. This approach opens new avenues for photo-triggered click reactions of aryl layers from diazonium salts. It shows that the new class of surface modifiers and coupling agents has much to offer and continues to be renewed for achieving tightly bound, reactive top coatings.

RESUMEN

A monolith surface with alkyne functionality was reacted with cysteamine through radical-mediated thiol-yne addition reaction providing a hydrophilic and chelating interface. Photochemical initiation affords spatial control over the reaction site and further site-specific immobilisation of gold nanoparticles.

RESUMEN

This critical review summarizes existing knowledge on the use of diazonium salts as a new generation of surface modifiers and coupling agents for binding synthetic polymers, biomacromolecules, and nanoparticles to surfaces. Polymer grafts can be directly grown at surfaces through the so-called grafting from approaches based on several polymerization methods but can also be pre-formed in solution and then grafted to surfaces through grafting onto strategies including "click" reactions. Several routes are also described for binding biomacromolecules through aryl layers in view of developing biosensors and protein arrays, while the use of aryl diazonium coupling agents is extended to the attachment of nanoparticles. Patents and industrial applications of the surface chemistry of diazonium compounds are covered. This review stresses the paramount role of aryl diazonium coupling agents in adhesion, surface and materials sciences (114 references).

Asunto(s)

RESUMEN

Poly(glycidyl methacrylate), PGMA, was prepared via ATRP in bulk solution, and its epoxy groups were further acid-hydrolyzed in order to obtain a polymer with glycerol moieties (noted POH). The POH chain end C-Br bonds were subjected to a nucleophilic attack by NaN(3), resulting in azide-terminated POH (POH-N(3)). The CNTs were modified by in-situ-generated alkynylated diazonium cations from the para-alkynylated aniline of the formulas H(2)N-C(6)H(4)-C≡C-H, yielding CNT-C(6)H(4)-C≡C-H nanotubes. The azide-functionalized polymer POH-N(3) was clicked to the alkynyl-modified CNTs giving CNT@POH hybrids, which were further subjected to an oxidation resulting in carboxylated polymer-modified CNTs (noted CNT@PCOOH). The as-designed hairy CNTs served as efficient platforms for the in-situ synthesis and massive loading of 3 nm sized palladium nanoparticles (NPs). The CNT@PCOOH@Pd heterostructures prepared so far exhibited an efficient catalytic effect in the C-C Suzuki coupling reaction and were regenerated up to four times without any significant loss of catalytic activity.