RESUMEN
RATIONALE: There are a growing number of examples of protomers formed via electrospray ionization (ESI) that do not fragment under mobile proton conditions, giving rise to distinct tandem mass spectra. To model the N-protomer of 4-aminobenzoic acid, here we study the gas-phase unimolecular and bimolecular chemistry of the 4-(carboxyphenyl)trimethylammonium ion. METHODS: 4-(Carboxyphenyl)trimethylammonium iodide was synthesized, purified via recrystallization and transferred to the gas phase via ESI. 4-(Carboxyphenyl)trimethylammonium ion, 7, was mass selected and subjected to collision-induced dissociation and ion-molecule reactions in a linear ion trap mass spectrometer. RESULTS: The major fragmentation channel for the fixed-charge cation 7 is methyl radical loss, whereas loss of trimethylamine and CO2 represents minor pathways. The free carboxylic acid functional group of 7 is unreactive toward a number of neutral reagents (methanol, acetone, acetonitrile, and N,N'-diisopropylcarbodiimide). 7 reacts very slowly with trimethylborate via addition-elimination, consistent with density functional theory (DFT) calculations that show this reaction is slightly endothermic. The deuterated cation 7(D) undergoes slow D/H exchange with ethanol, and DFT calculations reveal that a flip-flop mechanism operates. CONCLUSIONS: The free carboxylic group of 7 is not very reactive toward neutral reagents in the gas phase.
RESUMEN
Analytes are sampled from both solution phase and gas-phase environments during the ESI process, and thus, the mass spectrum that is measured can reflect both solution and gas-phase conditions. In the gas-phase regime, ion-molecule reactions can influence the types of ions that are observed. Herein, the synergistic effects of a Lewis acid (Mg2+) and background water are shown to lead to protonolysis of two of the B-C bonds of the tetraphenylborate ion in the gas phase, giving rise to different ions at different reaction times in ESI-MS/MS experiments in a linear ion trap mass spectrometer. At short reaction times (1 ms), the expected adduct [Mg(BPh4)]+ is observed. At 10 ms, [(HO)Mg(BPh3)]+ and [(HO)2Mg(BPh2)]+ are observed. At 100 ms, the water adducts [(HO)2Mg(BPh2)(H2O)]+ and [(HO)2Mg(BPh2)(H2O)2]+ appear, and these become the dominant ions at longer reaction times. DFT calculations provide a plausible explanation as to why only [(HO)Mg(BPh3)]+ and [(HO)2Mg(BPh2)]+ but not [(HO)3Mg(BPh)]+ are observed.
RESUMEN
Multistage mass spectrometry experiments, isotope labelling and DFT calculations were used to explore whether selective decarbonylation of formic acid could be mediated by molybdate anions [(MoO3)x(OH)]- (x = 1 and 2) via a formal catalytic cycle involving two steps. In step 1, both molybdate anions undergo gas-phase ion-molecule reactions (IMR) with formic acid to produce the coordinated formates [(MoO3)x(O2CH)]- and H2O. In step 2, both coordinated formates [(MoO3)x(O2CH)]- undergo decarbonylation under collision-induced dissociation (CID) conditions to reform the molybdate anions [(MoO3)x(OH)]- (x = 1 and 2), thus closing a formal catalytic cycle. In the case of [MoO3(O2CH)]- an additional decarboxylation channel also occurs to yield [MoO3(H)]-, which is unreactive towards formic acid. The reaction between [Mo18O3(18OH)]- and formic acid gives rise to [Mo18O3(O2CH)]- highlighting that ligand substitution occurs without 18O/16O exchange between the coordinated 18OH ligand and HC16O2H. The reaction between [(MoO3)x(OD)]- (x = 1 and 2) and DCO2H initially produces [(MoO3)x(OH)]- (x = 1 and 2), indicating that D/H exchange occurs. DFT calculations were carried out to investigate the reaction mechanisms and energetics associated with both steps of the formal catalytic cycle and to better understand the competition between decarbonylation and decarboxylation, which is crucial in developing a selective catalyst. The CO and CO2 loss channels from the monomolybdate anion [MoO3(O2CH)]- have similar barrier heights which is in agreement with experimental results where both fragmentation channels are observed. In contrast, the dimolybdate anion is more selective, since the decarbonylation pathway of [(MoO3)2(O2CH)]- is both kinetically and thermodynamically favoured, which agrees with experimental observations where the CO loss channel is solely observed.
RESUMEN
A near thermal two-step catalytic cycle for the selective release of hydrogen from formic acid by mononuclear cuprate anions was revealed using multistage mass spectrometry experiments, deuterium labelling and DFT calculations. In gas-phase ion-molecule reactions, mononuclear copper hydride anions [(L)Cu(H)]- (where L = H-, O2CH-, BH4- and CN-) were found to react with formic acid (HCO2H) to yield [(L)Cu(O2CH)]- and H2. The copper formate anions [(L)Cu(O2CH)]- can decarboxylate via collision-induced dissociation (CID) to reform the copper hydride [(L)Cu(H)]-, thereby closing the two-step catalytic cycle. Analogous labelling experiments with d1-formic acid (DCO2H) reveal that the decarboxylation process also occurs spontaneously. A kinetic study was carried out to provide further insights into the species involved in this reaction. Energetics from density functional theory (DFT) calculations show that the key decarboxylation step can occur without CID, thus in support of experimental observations.
RESUMEN
The metastable trilacunary heteropolyoxomolybdate [PMo9O31(py)3]3- - {PMo9}; py = pyridine) and the ditopic pyridyl bearing diarylethene (DAE) (C25H16N2F6S2) self-assemble via a facile ligand replacement methodology to yield the photo-active molecular capsule [(PMo9O31)2(DAE)3]6-. The spatial arrangement and conformation of the three DAE ligands are directed by the surface chemistry of the molecular metal oxide precursor with exclusive ligation of the photo-active antiparallel rotamer to the polyoxometalate (POM) while the integrity of the assembly in solution has been verified by a suite of spectroscopic techniques. Electrocyclisation of the three DAEs occurs sequentially and has been investigated using a combination of steady-state and time-resolved spectroscopies with the discovery of a photochemical cascade whereby rapid photoinduced ring closure is followed by electron transfer from the ring-closed DAE to the POM in the latent donor-acceptor system on subsequent excitation. This interpretation is also supported by computational and detailed spectroelectrochemical analysis. Ring-closing quantum yields were also determined using a custom quantum yield determination setup (QYDS), providing insight into the impact of POM coordination on these processes.
RESUMEN
Copper(I) borohydride ate complexes of the type Cat+[XCu(BH4)]- have been previously postulated as intermediates in the reactions of copper salts with borohydride. Negative ion electrospray ionization of an acetonitrile solution of copper(I) phenylacetylide with a 10-fold excess of sodium borohydride (NaBH4) revealed the formation of a diverse range of mononuclear, dinuclear and trinuclear cuprates with different numbers of BH4-, H- and CN- ligands, the latter likely being formed by abstraction of CN- from the acetonitrile solvent. Collision-induced dissociation was used to examine the fragmentation reactions of the following borohydride containing cuprates: [Cu(H)(BH4)]-, [Cu(BH4)2]-, [Cu(BH4)(CN)]-, [Cu2(H)(BH4)2]-, [Cu2(H)2(BH4)]-, [Cu2(BH4)2(CN)]-, [Cu2(H)(BH4)(CN)]-, [Cu3(H)(BH4)3]-, [Cu3(H)2(BH4)2]-, [Cu3(H)3(BH4)]-, [Cu3(BH4)2(CN)2]-, and [Cu3(H)(BH4)2(CN)]-. In all cases, BH3 loss is observed. For many of the dinuclear and trinuclear complexes cluster fragmentation by loss of CuH was also observed. In the case of [Cu2(H)2(BH4)]- and [Cu3(H)3(BH4)]-, loss of H2 was also observed. DFT calculations were used to explore potential structures of the various borohydride-containing cuprates and to predict the overall reaction energetics for the various fragmentation channels.
RESUMEN
Electrospray ionization-mass spectrometry (ESI-MS) of mixtures of AgBF4 or AgNO3 with the capping ligand bis(diphenylarsino)methane ((Ph2 As)2 CH2 = dpam) in a solution of acetonitrile revealed the formation of the following cations: [Ag(CH3 CN)(dpam)]+ , [Ag(dpam)2 ]+ , [Ag2 (Cl)(dpam)2 ]+ , and [Ag3 (Cl)2 (dpam)3 ]+ . Addition of NaBH4 to these solutions results in the formation of the cluster cations [Ag2 (BH4 )(dpam)2 ]+ , [Ag2 (BH4 )(dpam)3 ]+ , [Ag3 (H)(BH4 )(dpam)3 ]+ , [Ag3 (BH4 )2 (dpam)3 ]+ , [Ag3 (H)(Cl)(dpam)3 ]+ , and [Ag3 (I)(BH4 )(dpam)3 ]+ , as established by ESI-MS. Use of NaBD4 confirmed that borohydride is the source of the hydride in these clusters. An Orbitrap Fusion LUMOS mass spectrometer was used to explore the gas-phase unimolecular chemistry of selected clusters via multistage mass spectrometry (MSn ) experiments employing low-energy collision-induced dissociation (CID) and high-energy collision-induced dissociation (HCD) experiments. The borohydride containing clusters fragment via two competing pathways: (i) ligand loss and (ii) B-H bond activation involving BH3 loss. Density functional theory (DFT) calculations were used to calculate the energetics of the optimized structures for all precursor ions, fragment ions, and neutrals and to estimate the reaction endothermicities. Generally, there is reasonable agreement between the most abundant product ion formed and the predicted endothermicity of the associated reaction channel. The DFT calculations predicted that the novel dimer [Ag2 (BH4 )(dpam)2 ]+ has a paddlewheel structure in which the dpam and BH4 - ligands bridge both silver centers.
RESUMEN
The reactions between silver salts and borohydrides produce a rich set of products that range from discrete mononuclear compounds through to silver nanoparticles and colloids. Previous studies using electrospray ionization mass spectrometry (ESI-MS) to track the cationic products in solutions containing sodium borohydride, silver(i) tetrafluoroborate and the bisphosphine ligands, L, bis(diphenylphosphino)methane (dppm) and bis(diphenylphosphino)amine (dppa) have identified the dications [Ag10H8(L)6]2+. Here we isolate and structurally characterize [Ag10H8(dppa)6](BF4)2, and [Ag10H8(dppa)6](NO3)2via X-ray crystallography. Both dications have nearly identical structural features consisting of a Ag10 scaffold with the atoms lying on vertices of a bicapped square antiprism. DFT calculations were carried out to suggest potential sites for the hydrides. Ion-mobility mass spectrometry experiments revealed that [Ag10H8(dppa)6]2+ and [Ag10H8(dppm)6]2+ have similar collision cross sections, while multistage mass spectrometry experiments were used to compare their unimolecular gas-phase chemistry. Although the same initial sequential ligand loss followed by cluster fission and H2 evolution is observed, the more acidic N-H of the dppa provides a more labile H for H2 loss and H/D scrambling processes as revealed by isotope labelled experiments.
RESUMEN
Electrospray ionisation mass spectrometry (ESI-MS) was used to monitor the reaction of AgBF4, bis(diphenylphosphino)amine (dppa = (Ph2P)2NH = LPh) and NaBH4 in acetonitrile and thereby direct the synthesis of the silver nanocluster [Ag3(µ3-H)(µ3-BH4)LPh3](BF4), 3b·BF4, formed via reaction of AgBF4, bis(diphenylphosphino)amine (dppa = (Ph2P)2NH = LPh) and NaBH4 in acetonitrile. The X-ray structure of 3b·BF4 highlights that the cation adopts a planar trinuclear Ag3 geometry surrounded by three dppa ligands and coordinated on the bottom face by a µ3-hydride and on the top face by a µ3-BH4. The solution phase structure of 3b·BF4 was characterised by multinuclear NMR and DOSY NMR, which showed that the borohydride anion remains bound in the [Ag3(µ3-H)(µ3-BH4)LPh3]+ cluster cation in solution. ESI-MS and in situ1H and HSQC NMR spectroscopy reveals that 3b·BF4 reacts with CS2 in solution at the BH4 site to yield [Ag3(H)(S2CH)LPh3]+, 4b, which has to date eluded structural characterisation via X-ray crystallography due to lack of formation of suitable crystals. The gas-phase ion chemistry of [Ag3(H)(S2CH)LPh3]+ was examined under multistage mass spectrometry conditions using collision-induced dissociation (CID) and compared to that of the previously examined copper analogue, [Cu3(H)(S2CH)LPh3]+. While both cluster cations fragment via ligand loss, the CID spectra of the resultant [M3(H)(S2CH)LPh2]+ are different. Unlike [Cu3(H)(S2CH)LPh2]+, which solely undergoes loss of thioformaldehyde to give [Cu3(S)LPh2]+, [Ag3(H)(S2CH)LPh2]+ gives a richer CID spectrum with fragmentation channels that include ligand loss, CH2S loss and reductive elimination of dithioformic acid. DFT calculations exploring rearrangement and fragmentation of the model systems [M3(H)(S2CH)LMe2]+ ((Me2P)2NH = dmpa = LMe) were used to suggest plausible mechanisms and examine the energetics of the three competing channels: ligand loss, CH2S loss and reductive elimination of dithioformic acid.
RESUMEN
We report new structural motifs for Cu nanoclusters that conceptually represent seed crystals for large face-centred cubic (FCC) crystal growth. Kinetically controlled syntheses, high resolution mass spectrometry experiments for determination of the dication formulae and crystallographic characterisation were carried out for [Cu18 H16 (DPPE)6 ][BF4 ][Cl] (DPPE=bis(diphenylphosphino)ethane) and [Cu16 H14 (DPPA)6 ][(BF4 )2 ] (DPPA=bis(diphenylphosphino)amine) polyhydrido nanoclusters, which feature the unprecedented bifrustum and frustum metal-core architecture in metal nanoclusters. The Cu18 nanocluster contains two Cu9 frustum cupolae and the Cu16 nanocluster has one Cu9 frustum cupola and a Cu7 distorted hexagonal-shape base. Gas-phase experiments revealed that both Cu18 H16 and Cu16 H14 cores can spontaneously release H2 upon removal of one bisphosphine capping ligand.
RESUMEN
The copper nanocluster [Cu3(µ3-H)(µ3-BH4)LPh3](BF4), 1a·BF4 (LPh = (PPh2)2NH = dppa), can potentially react with substrates at either the coordinated hydride or borohydride sites. Reaction of 1a·BF4 with CS2 has given rise to [Cu3(µ3-H)(µ2,µ1-S2CH)LPh3](BF4), (2a·BF4), which was structurally characterised using electrospray ionisation (ESI) with high-resolution mass spectrometry (HRMS), X-ray crystallography, NMR, IR and UV-Vis spectroscopy. The copper(i) atoms adopt a planar trinuclear Cu3 geometry coordinated on the bottom face by a µ3-hydride, on the top face by a µ2,µ1-dithioformate and surrounded by three bridging LPh ligands. Reaction of 1a·BF4 with elemental sulfur gives the known cluster [Cu4(LPh-H + 2S)3](BF4), (3·BF4), which was structurally characterised via X-ray crystallography. ESI-MS of 2a·BF4 produces [Cu3(H)(S2CH)LPh3]+ and its gas-phase ion chemistry was examined under multistage mass spectrometry conditions using collision-induced dissociation (CID). The primary product, [Cu3(H)(S2CH)LPh2]+, formed via ligand loss, undergoes further fragmentation via loss of thioformaldehyde to give [Cu3(S)LPh2]+. DFT calculations exploring rearrangement and fragmentation of the model system [Cu3(H)(S2CH)LMe2]+ (LMe = (PMe2)2NH = dmpa) provide a feasible mechanism. Thus, coupling of the coordinated hydride with the dithioformate ligands gives [Cu3(S2CH2)LMe2]+, which then undergoes CH2S extrusion via C-S bond cleavage to give [Cu3(S)LMe2]+.