RESUMEN

The aim of this study was to evaluate the performance of a pen-type laser fluorescence (LF) device (LFpen: DIAGNOdent pen) to detect and monitor the progression of caries-like lesions on smooth surfaces. Fifty-two bovine enamel blocks were submitted to three different demineralisation cycles for caries-like lesion induction using Streptococcus mutans, Lactobacillus casei and Actinomyces naeslundii. At baseline and after each cycle, the enamel blocks were analysed under Knoop surface micro-hardness (SMH) and an LFpen. One enamel block after each cycle was randomly chosen for Raman spectroscopy analysis. Cross-sectional micro-hardness (CSMH) was performed at different depths (20, 40, 60, 80 and 100 µm) in 26 enamel blocks after the second cycle and 26 enamel blocks after the third cycle. Average values of SMH (± standard deviation (SD)) were 319.3 (± 21.5), 80.5 (± 31.9), 39.8 (± 12.7), and 29.77 (± 10.34) at baseline and after the first, second and third cycles, respectively. Statistical significant difference was found among all periods (p < 0.01). The LFpen values were 4.3 (± 1.5), 7.5 (± 9.4), 7.1 (± 7.1) and 5.10 (± 3.58) at baseline and after the first, second, and third cycles, respectively, among all periods (p < 0.05). The CSMH values after the second and third cycles at 20, 40, 60, 80 and 100 µm were 182.8 (± 69.8), 226.1 (± 79.6), 247.20 (± 69.36), 262.35 (± 66.36) and 268.45 (± 65.49), and for the third cycle were 193.7 (± 73.4), 239.5 (± 81.5), 262.64 (± 82.46), 287.10 (± 78.44) and 284.79 (± 72.63) (n = 24 and 23), respectively. No correlation was observed between the LFpen and SMH values (p > 0.05). One sample of each cycle was characterised through Raman spectroscopy analysis. It can be concluded that LF was effective in detecting the first demineralisation on enamel; however, the method did not show any effect in monitoring lesion progression after three cycles of in vitro demineralisation.

Asunto(s)

RESUMEN

AIM: This study aimed to evaluate the effect of a digital learning tool on undergraduate dental students' performance in detecting dental caries using ICDAS. METHODS: An experimental digital learning tool (DLT) was created using digital photographs of sound and carious teeth. Thirty-nine students were divided into three groups (n = 13) and each assessed 12 randomly allocated patients before and after learning strategies: G1, ICDAS e-learning program; G2, ICDAS e-learning program plus DLT; G3, no learning strategy. Students (n = 32) reassessed patients 2 weeks after training. RESULTS: Comparing before and after the learning strategies, any difference in the values of specificity and area under the ROC curve for all groups was found. Sensitivity was statistically significantly higher for G1 and G2. Comparing the groups, G2 showed a significant increase in sensitivity at the D2 and D3 thresholds. Spearman's correlations with the gold standard before and after the learning strategy were 0.60 and 0.61 for G1, 0.57 and 0.63 for G2, and 0.54 and 0.54 for G3, respectively. The Wilcoxon test showed a statistically significant difference between the values obtained before and after learning strategies for G1 and G2. CONCLUSIONS: Use of the DLT after the ICDAS e-learning program tended to increase the sensitivity of ICDAS used by undergraduate dental students. The DLT appeared to improve dental students' ability to use ICDAS.

Asunto(s)

RESUMEN

This study aimed to evaluate the effectiveness of fluorescence-based methods (DIAGNOdent, LF; DIAGNOdent pen, LFpen, and VistaProof fluorescence camera, FC) in detecting demineralization and remineralization on smooth surfaces in situ. Ten volunteers wore acrylic palatal appliances, each containing 6 enamel blocks that were demineralized for 14 days by exposure to a 20% sucrose solution and 3 of them were remineralized for 7 days with fluoride dentifrice. Sixty enamel blocks were evaluated at baseline, after demineralization and 30 blocks after remineralization by two examiners using LF, LFpen and FC. They were submitted to surface microhardness (SMH) and cross-sectional microhardness analysis. The integrated loss of surface hardness (ΔKHN) was calculated. The intraclass correlation coefficient for interexaminer reproducibility ranged from 0.21 (FC) to 0.86 (LFpen). SMH, LF and LFpen values presented significant differences among the three phases. However, FC fluorescence values showed no significant differences between the demineralization and remineralization phases. Fluorescence values for baseline, demineralized and remineralized enamel were, respectively, 5.4 ± 1.0, 9.2 ± 2.2 and 7.0 ± 1.5 for LF; 10.5 ± 2.0, 15.0 ± 3.2 and 12.5 ± 2.9 for LFpen, and 1.0 ± 0.0, 1.0 ± 0.1 and 1.0 ± 0.1 for FC. SMH and ΔKHN showed significant differences between demineralization and remineralization phases. There was a negative and significant correlation between SMH and LF and LFpen in the remineralization phase. In conclusion, LF and LFpen devices were effective in detecting demineralization and remineralization on smooth surfaces provoked in situ.

Asunto(s)

RESUMEN

This study aimed to assess the performance of International Caries Detection and Assessment System (ICDAS), radiographic examination, and fluorescence-based methods for detecting occlusal caries in primary teeth. One occlusal site on each of 79 primary molars was assessed twice by two examiners using ICDAS, bitewing radiography (BW), DIAGNOdent 2095 (LF), DIAGNOdent 2190 (LFpen), and VistaProof fluorescence camera (FC). The teeth were histologically prepared and assessed for caries extent. Optimal cutoff limits were calculated for LF, LFpen, and FC. At the D (1) threshold (enamel and dentin lesions), ICDAS and FC presented higher sensitivity values (0.75 and 0.73, respectively), while BW showed higher specificity (1.00). At the D (2) threshold (inner enamel and dentin lesions), ICDAS presented higher sensitivity (0.83) and statistically significantly lower specificity (0.70). At the D(3) threshold (dentin lesions), LFpen and FC showed higher sensitivity (1.00 and 0.91, respectively), while higher specificity was presented by FC (0.95), ICDAS (0.94), BW (0.94), and LF (0.92). The area under the receiver operating characteristic (ROC) curve (Az) varied from 0.780 (BW) to 0.941 (LF). Spearman correlation coefficients with histology were 0.72 (ICDAS), 0.64 (BW), 0.71 (LF), 0.65 (LFpen), and 0.74 (FC). Inter- and intraexaminer intraclass correlation values varied from 0.772 to 0.963 and unweighted kappa values ranged from 0.462 to 0.750. In conclusion, ICDAS and FC exhibited better accuracy in detecting enamel and dentin caries lesions, whereas ICDAS, LF, LFpen, and FC were more appropriate for detecting dentin lesions on occlusal surfaces in primary teeth, with no statistically significant difference among them. All methods presented good to excellent reproducibility.

Asunto(s)

RESUMEN

This study aimed to evaluate the influence of professional prophylactic methods on the DIAGNOdent 2095, DIAGNOdent 2190 and VistaProof performance in detecting occlusal caries. Assessments were performed in 110 permanent teeth at baseline and after bicarbonate jet or prophylactic paste and rinsing. Performance in terms of sensitivity improved after rinsing of the occlusal surfaces when the prophylactic paste was used. However, the sodium bicarbonate jet did not significantly influence the performance of the fluorescence-based methods. It can be concluded that different professional prophylactic methods can significantly influence the performance of fluorescence-based methods for occlusal caries detection.

Asunto(s)

RESUMEN

El objetivo de esta investigación era el de estudiar la liberación de mercurio en agua de las amalgamas más utilizadas en Suiza inmediatamente después de su obturación y al cabo de dos años de envejecimiento. En el estudio inmediatamente después de la obturación se incluyó una amalgama comercializada en uruguay (Ventura III non delta 2). Se mejoró la metodología de medición utilizada antiguamente a los efectos de minimizar la pérdida por absorción o evaporación del mercurio. La liberación de mercurio de las obturaciones de amalgama sin pulir en las primeras 24 horas siguientes a la condensación osciló entre 17,4 ug/cm2 por día y 34,5 ug/cm2 por día, pudiendo comprobarse significativas diferencias entre los diversos tipos de amalgama. Al cabo de dos años de envejecimiento, la liberación de mercurio se situó promedialmente en 1,5 ug/cm2 por día, no pudiendo constatarse ya diferencias significativas entre las diferentes amalgamas. El método empleado aquí, mejorado, permitió minimizar los errores de medición. En suma se comprueba que las cantidades de mercurio liberadas en agua inmediatamente después de la obturación son mayores de lo que se creía antiguamente. Al cabo de dos años de obturada una amalgama, la liberación de mercurio es significativamente menor

Asunto(s)

RESUMEN

El objetivo de la presente investigación era la de determinar la liberación de mercurio y cobre en obturaciones de amalgama de dientes extraídos. Además se quiso determinar si el pulido de antiguas obturaciones puede reducir la liberación de mercurio. Con ayuda del microscopio electrónico de retículos y del sistema de análisis EDX acoplado al mismo se determinó el tipo de amalgama. Las obturaciones no pulidas liberaron al agua promedialmente 1,00 ug/cm2 y 0,06 ug/cm2 por día. Después del pulido dichos valores se redujeron significativamente a 0,19 ug/cm2 día para el mercurio y 0,03 ug/cm2/día para el cobre (p=0,09). En suma puede afirmarse que las amalgamas envejecidas "in situ" han demostrado liberar similar cantidad de mercurio que aquellas envejecidas "in vitro". El pulido (realizado en forma minuciosa y bajo continua refrigeración de agua) de antiguas obturaciones de amalgama, reduce significativamente tanto la liberación de mercurio como la de cobre

Asunto(s)

Asunto(s)

Asunto(s)

Asunto(s)

Asunto(s)

Asunto(s)