RESUMEN
This work introduces the outcomes of the first process for the identification and evaluation of sites potentially contaminated in the Region of the Bio Bio, Chile. The methodology combined qualitative and quantitative elements from Austrian and German risk assessment procedures, calibrated and adapted to the Chilean reality. The developed process consists of collecting historical and current registers on soil use, effects of materials handling on the population's health, and the description of the site conditions. The first analytical step corresponds to an image algebra analysis, through which the most vulnerable areas of the region are established. The sites identified inside the most vulnerable areas are classified into five priority classes, giving an approximate degree of endangerment from these sites. Through the experience, from a total of 507 sites identified as suspicious of contamination, five sites were classified under the highest priority. The results of this analysis have allowed Chilean authorities to focus their resources on the detailed investigations to be carried out in the five priority locations, whilst planning the future strategy to follow for the practical management of all sites found as currently posing a risk to the environment and to the society.
Asunto(s)
Contaminación Ambiental/estadística & datos numéricos , Residuos Peligrosos/estadística & datos numéricos , Residuos Industriales/estadística & datos numéricos , Administración de Residuos/estadística & datos numéricos , Calibración , Chile , Conservación de los Recursos Naturales , Medición de RiesgoRESUMEN
The volcanic soils of southern Chile have demonstrated a high capacity to adsorb environmental pollutants, but for an industrial application, a stable solid material is necessary. The objective of this work was to produce a stable ceramic material through a process involving volcanic soil-polyurethane foam produced with recycled polyethylene terephthalate (PET)-polyols, and further thermal treatment. The selected foam formulation with 35.4% volcanic soil (< 63 microm) seems to be the most suitable for thermal treatment, with temperature steps at 700, 850, 1000 and 1200 degrees C. The porous ceramic material obtained has a stable solid form and an improved chlorophenols adsorption capacity (comparable to natural zeolites) that makes it suitable for advanced wastewater treatment and landfill leachate depuration.
Asunto(s)
Conservación de los Recursos Naturales , Tereftalatos Polietilenos/química , Poliuretanos/química , Contaminantes del Suelo/química , Adsorción , Clorofenoles/química , Cobre/química , Calor , Residuos Industriales , Pentaclorofenol/química , Suelo , Eliminación de Residuos Líquidos/métodos , Purificación del Agua/métodosRESUMEN
The present paper describes the development, performance and conclusions derived from three know-how and technology transfer projects to South American countries. The first project comprised a collaborative study by European and South American universities to find sustainable solutions for Chilean and Ecuadorian leather tanneries which had underachieving process performances. The second project consisted of investigations carried out in a Brazilian municipality to enhance its municipal solid waste management system. The final collaborative programme dealt with the initial identification, evaluation and registration of suspected contaminated sites in an industrial region of Chile. The detailed objectives, methods and procedures applied as well as the results and conclusions obtained in each of the three mentioned projects are presented, giving special attention to the organizational aspects and to the practical approach of each programme, concluding with their main advantages and disadvantages for identifying a set of qualitative and quantitative suggestions, and to establish transferable methods for future applications.
Asunto(s)
Residuos Peligrosos , Transferencia de Tecnología , Administración de Residuos , Conservación de los Recursos Naturales , Residuos Industriales , América del Sur , CurtiembreRESUMEN
This work presents an analysis on the suitability of mechanical biological treatment of municipal solid waste in South America, based on two previous experimental investigations carried out in two different countries. The first experiment was performed for determining the mass and volume reduction of MSW in the province of Concepción (Chile). The implemented bench-scale process consisted of a manual classification and separation stage, followed by an in-vessel biological degradation process. The second experiment consisted of a full-scale experiment performed in the city of Estrela (Brazil), where the existing municipal waste management facility was adapted to enhance the materials sorting and separation. Expressed in wet weight composition, 85.5% of the material input in the first experiment was separated for biological degradation. After 27 days of processing, 60% of the initial mass was reduced through degradation and water evaporation. The final fraction destined for landfilling equals 59% of the total input mass, corresponding to about 50% of the initial volume. In the second experiment, the fraction destined to landfill reaches 46.6% of the total input waste mass, whilst also significantly reducing the total volume to be disposed. These results, and the possible recovery of material streams suitable for recycling or for preparing solid recovered fuels, are the main advantages of the studied process.
Asunto(s)
Biodegradación Ambiental , Ciudades , Eliminación de Residuos , América del SurRESUMEN
The main physicochemical characteristics of the volcanic soil of Southern Chile, with allophane as the main pedogenic mineral phase were analysed and compared with common zeolites (clinoptilolite) of the European market. The ultimate goal of this study was to test volcanic soil for the use as mineral landfill liner. The main results indicated that the clay and silt fractions together of the volcanic soil were between 38 and 54%. The buffering capacity of the volcanic soil was higher compared with the studied zeolites, whereas the cationic exchange capacity of the volcanic soil (between 5.2 and 6.5 cmol + kg(-1)) is of the same order of magnitude of the studied zeolites (between 9.7 and 11.4 cmol + kg(-1)). Moreover, the anionic exchange capacity of the volcanic soil was higher compared to the zeolites analysed. The hydraulic conductivity of the volcanic soil, measured in the laboratory at maximum proctor density, ranges between 5.16 x 10(-9) and 6.48 x 10(-9) m s(-1), a range that is comparable to the value of 4.51 x 10(-9) m s(-1) of the studied zeolite. The Proctor densities of the volcanic soil are in a lower range (between 1.11 and 1.15 g ml(-1)) compared with zeolites (between 1.19 and 1.34 g ml(-1)). The volcanic soil physicochemical characteristics are comparable to all the requirements established in the Austrian landfill directive (DVO, 2000). Therefore, the use as mineral landfill basal sealing of the analysed volcanic soil appears reasonable, having a pollutant adsorption capacity comparable to zeolites. It is of special interest for Southern Chile, because there are no alternative mineral raw materials for basal liners of landfills.
Asunto(s)
Contaminación Ambiental/prevención & control , Eliminación de Residuos/métodos , Suelo , Erupciones Volcánicas , Zeolitas/química , Adsorción , Carbono/análisis , Chile , Concentración de Iones de Hidrógeno , Intercambio Iónico , Metales/análisis , Metales/química , Tamaño de la Partícula , Suelo/análisis , Espectrometría por Rayos X , Erupciones Volcánicas/análisis , Movimientos del AguaRESUMEN
The volcanic soil of Southern Chile was tested for its heavy metal retention capacity. The maximum uptakes for CrO4(2-) (CrVI), Cu(2+), Zn(2+) and Pb(2+) were determined to be 2.74, 5.32, 5.86 and 7.44 mg g(-1), respectively. At a slightly alkaline pH value (7.5), it seems that a precipitation-adsorption process was responsible for the Cu(2+) and Zn(2+) uptake onto volcanic soil. All the determined values are of the same order of magnitude as natural zeolites heavy metals adsorption capacities. In addition, the heavy metals diffusion model through a 1 m volcanic soil mineral liner shows breakthrough times of 21.6, 10.2 and 8.9 years, for Pb(2+), Zn(2+) and Cu(2+), respectively, confirming the trend obtained in the adsorption isotherms. The natural volcanic soil of Southern Chile is an interesting material for possible use as landfill mineral basal sealing. It has an appropriate sealing potential (average Kf value of 5.85 x 10(-9) m s(-1)) and a heavy metals retention capacity comparable with natural zeolites. About two-thirds of the agricultural land in Chile (approximately 0.4 million km2) is derived from volcanic ash, suggesting an important soil volume for future landfill projects, that could be obtained in sufficient quantities from urban building activities.