RESUMEN

How to efficiently produce high performance plywood is of particular interest, while its sensitivity to moisture is overcome. This paper presents a simple and scalable strategy for the preparation of high-performance plywood based on the chemical bonding theory; a wood interfacial functionalized platform (WIFP) based on (3-aminopropyl) triethoxysilane (APTES) was established. Interestingly, the APTES-enhanced dialdehyde cellulose-based adhesive (DAC-APTES) was able to effectively establish chemically active adhesive interfaces; the dry/wet shear strength of WIFP/DAC-APTES adhesive was 3.15/1.31 MPa, which was much higher than 0.7 MPa (GB/T 9846-2015). The prepared plywood showed excellent wood-polymer interface adhesion, which exceeded the force that the wood itself could withstand. In addition, the DAC-APTES adhesive exhibits moisture evaporation-induced curing behavior at room temperature and can easily support the weight of an adult weighing 65.7 Kg. This research provides a novel approach for functionalized interface design of wood products, an effective means to prepare high-performance plywood.

Asunto(s)

RESUMEN

Biomass-based adhesives are considered to be the preferred alternative to formaldehyde-type wood adhesives due to their wide range of sources, low cost, and sustainability. Herein, an environmentally friendly Schiff base cross-linked compact three-dimensional network structure bio-adhesive (DAC-PEI-U) derived from polyethyleneimine (PEI), urea, and cellulose was successfully prepared, verifying by detailed FTIR, NMR, and XPS analysis. Schiff base bridging between aldehyde groups in dialdehyde cellulose (DAC) and amino groups in polyurea (PEIU) not only constructed crosslinking networks but also endowed adhesives with good adhesion property. The dry bond strength of DAC-PEI-U adhesive reached 2.71 MPa, and the wet shear strength was 1.51 MPa (hot water) and 1.34 MPa (boiling water), respectively. It not only improves the water resistance and bonding process, but also displays simple synthesis and low cost. The improved performance of DAC-PEI-U adhesive is attributed to the generation of hyperbranched cross-linking structure in the adhesive system, which results in increased cross-linking density and promotes the formation of dense cross-sections in the curing adhesive. This work paves a solid way for developing cellulose-based wood adhesives with wet bonding properties, thus holding great potential as an alternative to formaldehyde-type adhesives in wood-based panel and indoor panel bonding industries.

Asunto(s)

RESUMEN

Cu-Ni(OH)2/N-GR/Nafion/GCE has been prepared by electrodeposition and activation with NaOH. The proposed modified GCE was studied by electrochemical methods. It is found that dopamine shows favorable redox cyclic voltammetric response on the proposed modified GCE with peak separation of 25 mV and large current compared with on single-component modified GCE. The kinetic of electrode process has also been investigated with rate constant of 6.618 × 10(-3) cm/s, which can be deduced to be a quasireversible or near-reversible process. The proposed method has been used for DA detection with linear range of 1.0 × 10(-7) mol/L to 4.6 × 10(-5) mol/L, and the detection limit is 3.3 × 10(-8) mol/L. The proposed method has favorable stability and reproducibility and has also been used to determine DA in simulated samples and DA injections with favorable recoveries of 98.4% to 102.6%.

RESUMEN

OBJECTIVE: Familial left ventricular noncompaction(LVNC) is quite rare. We screened for the presence of LVNC and related clinical characteristics in a 5-generation Chinese family. METHODS: Comprehensive medical history was obtained from 40 members in a 5-generation Chinese family. Systemic clinical investigations including echocardiography (UCG), routine and ambulatory electrocardiogram (ECG), X-rays were performed in 33 family members. Cardiovascular magnetic resonance image (MRI) was carried out in 2 family members. RESULTS: Sudden cardiac death (including 1 occurred while following-up) was reported in 7 family members (17.5%, 7/40). LVNC was diagnosed in 10 out of the 33 family members (30.3%) and heart enlargement was evidenced in 3, heart failure in 2, complete left branch conductive block in 3, serious sick sinus syndrome (SSS) treated with permanent pacemaker implantation in 1 and paroxysmal supraventricular tachycardia treated with radiofrequency ablation procedure in 1 out of these 10 LVNC patients. Primary pedigree analysis revealed that offspring from female patients were at the highest risk to be affected by LVNC (15/18, 83.3%) while LVNC was absent in offspring of male LVNC patients (0/8). Moreover, clinical heart failure symptoms and arrhythmias were more severe in female LVNC patients than in male LVNC patients. CONCLUSION: Primary familial investigation reveals the matrilineal inheritance of familial LVNC in this 5-generation Chinese family, further investigations are warranted to explore the potential mutations in the mitochondrial genome responsible for LVNC in this family.

Asunto(s)

RESUMEN

A novel H(2)O(2) biosensor has been fabricated based on the direct electrochemistry and electrocatalysis of myoglobin (Mb) immobilized on silver nanoparticles doped carbon nanotubes film with hybrid sol-gel techniques. A pair of redox peaks with peak separation of 160 mV and formal potential of -0.295V was observed at this composite film, corresponding to the direct electrochemistry of Mb. The heterogeneous rate constant was estimated to be 0.41s(-1). Under optimum conditions, the amperometric determination of H(2)O(2) was performed with a linear range of 2.0 x 10(-6)-1.2 x 10(-3)molL(-1) and a detection limit of 3.6 x 10(-7)mol/L (S/N=3). The Michealis-Menten constant was also estimated to be 1.62mmolL(-1). The proposed biosensor showed favorable reproducibility, stability, selectivity and accuracy, and has been used to determine H(2)O(2) in real samples with favorable recoveries.

Asunto(s)

RESUMEN

Two novel N-(2-mercapto-1,3,4-thiadiazol-5-yl)-N'-(4-substituted-arylacetyl) urea compounds have been synthesized, characterized by NMR and MS, and used as self-assembly reagents to form self-assembled monolayers (SAMs) on Pt electrodes. The modified electrodes were characterized by electrochemical methods. The electrochemical behavior of p-benzenediol at the SAMs electrodes was investigated. It was found that the electrochemical response to p-benzenediol is controlled by diffusion and can be electrocatalyzed to obtain more symmetrical redox peaks and higher voltammetric current response at the SAMs electrodes, with a peak separation of 80 mV. For p-benzenediol the process at the SAMs electrodes is quasi-reversible with a rate constant of 0.6742 s-1. The SAMs electrodes have been used to determine p-benzenediol by differential pulse voltammetry. The peak current was linear for concentrations of p-benzenediol in the range 1x10(-7)-5x10(-4) mol L-1 and the detection limit was 4.0x10(-8) mol L-1. The SAMs electrodes were used to determine p-benzenediol in real photographic developer and in a synthetic waste water sample; the standard addition recovery was in the range 96.6-100.4%.

Asunto(s)

RESUMEN

A chemically modified electrode based on a chitosan-multiwall carbon nanotube (MWNT) coated glassy carbon electrode (GCE) is described, which exhibits an attractive ability to determine dopamine (DA) and ascorbic acid (AA) simultaneously. The modified electrode exhibited a high differential pulse voltammetry (DPV) current response to DA at 0.144 V and AA at -0.029 V (vs. SCE) in a 0.1 mol l(-1) phosphate buffer solution (pH = 7.2). The properties and behaviors of the chitosan-multiwall carbon nanotube modified electrode (MC/GCE) were characterized using cyclic voltammetry (CV) and DPV methods. The mechanism for the discrimination of dopamine from ascorbic acid at MC/GCE is discussed. The linear calibration range for DA and AA were 5 x 10(-7) mol l(-1) to 1 x 10(-4) mol l(-1) (r = 0.997), and 5 x 10(-6) mol l(-1) to 1 x 10(-3) mol l(-1) (r = 0.996), respectively. The MC/GCE showed good sensitivity, selectivity and stability.

Asunto(s)