RESUMEN
Characterization of surface features is essential in many industrial applications, especially for features with large depths, high aspect ratios or under extreme conditions. This work presents a non-contact method to characterize surface slots with large lengths using ultrasonic Rayleigh waves generated by a pulsed laser. A delay-and-sum superposition technique is applied to enhance the signal to noise ratio of transmitted Rayleigh waves. The length of the slot can be calculated from the time-of-flight information of Rayleigh waves without any prior knowledge of its orientation, width or aspect ratio. Both numerical simulations and experiments are conducted to demonstrate the proposed method, showing excellent performance. Furthermore, mode conversion has been studied to understand its impact on the reconstruction accuracy. Given the non-contact feature of the laser ultrasonic technique, the proposed method provides a simple and feasible avenue for the rapid characterisation of normal and angled surface features with high aspect ratio in extreme environments.
RESUMEN
We present laser-induced full-matrix imaging of complex-shaped objects that combines the advantages of noncontact laser ultrasound inspection and high-contrast array imaging based on total focusing method (TFM). Full-matrix data were acquired by synthesizing a laser ultrasonic array through an alternate scanning of the generation and detection laser beams. Taking advantage of the simultaneous generation of all wave modes, surface Rayleigh waves were extracted for surface profiling, and longitudinal waves were utilized for imaging. To gain a better understanding, we analyzed the full-wave dynamics in generation, propagation, and scattering by using numerical simulations. TFM was adapted to accommodate complex surface and suppress interference from other waves, including surface waves and straightforward traveling bulk waves between emission and reception. Numerical and experimental studies on an aluminum sample with a sinusoidal surface and side-drilled holes were conducted, and results agreed well.
RESUMEN
Space-coiling acoustic metasurfaces have been largely exploited and shown their outstanding wave manipulation capacity. However, they are complex in realization and cannot directly manipulate acoustic near-fields by controlling the effective path length. Here, we propose a comprehensive paradigm for acoustic metasurfaces to extend the wave manipulations to both far- and near-fields and markedly reduce the implementation complexity with a simple structure, which consists of an array of deep-subwavelength-spaced slits perforated in a thin plate. A semi-analytical approach for such a design is established using a microscopic coupled-wave model, which reveals that the acoustic diffractive pattern at every slit exit is the sum of the initial transmission and the secondary scatterings of the coupled fields from other slits. For proof-of-concept, we examine two metasurface lenses for sound focusing within and beyond the diffraction limit. This work provides a feasible strategy for creating ultra-compact acoustic components with versatile potentials.
RESUMEN
Corrosion is a major safety and economic concern to various industries. In this paper, a novel ultrasonic guided wave tomography (GWT) system based on self-designed piezoelectric sensors is presented for on-line corrosion monitoring of large plate-like structures. Accurate thickness reconstruction of corrosion damages is achieved by using the dispersive regimes of selected guided waves and a reconstruction algorithm based on full waveform inversion (FWI). The system makes use of an array of miniaturised piezoelectric transducers that are capable of exciting and receiving highly dispersive A0 Lamb wave mode at low frequencies. The scattering from transducer array has been found to have a small effect on the thickness reconstruction. The efficiency and the accuracy of the new system have been demonstrated through continuous forced corrosion experiments. The FWI reconstructed thicknesses show good agreement with analytical predictions obtained by Faraday's law and laser measurements, and more importantly, the thickness images closely resemble the actual corrosion sites.