RESUMEN

Enzyme immobilization is an ever-growing research-area for both analytical and industrial applications. Of critical importance in this area are the effects of immobilization procedures upon the functionality of the immobilized biomolecules. Both beneficial and detrimental effects can be conferred through the selection and tuning of the immobilization procedure. Quartz-crystal microbalance with dissipation (QCM-D) has been previously used to great effect in tracking alterations to thin films of biomolecules immobilized onto quartz transducers. In this study, we investigate the ability of QCM-D to track and monitor film parameters of a monolayer of laccase immobilized on a series of self-assembled monolayers (SAMs), differing in lateral density of binding residues on the SAM and height of the SAM from the quartz surface. Both mass gains and rheological parameters for these varying surfaces were measured and trends later compared to the apparent enzyme kinetics of the immobilized laccase films, assessed electroanalytically (Paper II in this two part study). For covalent attachment of proteins, both shear and viscosity were increased relative to physically adsorbed proteins. An increase in lateral density of protein-binding surface of the SAM components was shown to increase the shear/viscosity of the resultant film while an increase in distance from the electrode (through incorporation of lysine linkers) was shown to decrease the shear/viscosity while simultaneously increasing the wet mass gain of the films. Shear and viscosity may be indicative of both enzyme denaturation and increased lateral protein packing within the film structure hence it is assumed that less distortion occurs with the inclusion of linkers which allow for more optimal protein immobilization.

Asunto(s)

RESUMEN

The method of immobilization of a protein has a great influence on the overall conformation, and hence, functioning of the protein. Thus, a greater understanding of the events undergone by the protein during immobilization is key to manipulating the immobilization method to produce a strategy that influences the advantages of immobilization while minimizing their disadvantages in biosensor design. In this, the second paper of a two-part series, we have assessed the kinetic parameters of thin-film laccase monolayers, covalently attached to SAMs differing in spacer-arm length and lateral density of spacer arms. This was achieved using chronoamperometry and an electroactive product (p-benzoquinone), which was modeled in a non-linear regressional fashion to extract the relevant parameters. Finally, comparisons between the kinetic parameters presented in this paper and the rheological parameters of laccase monolayers immobilized in the same manner (Part I of this two paper series) were performed. Improvements in the maximal enzyme-catalysed current, i(max), the apparent Michaelis-Menten constant, K(m) and the apparent biosensor sensitivity were noted for most of the surfaces with increasing linker length. Decreasing the lateral density of the spacer-arms brought about a general improvement in these parameters, which is attributed to the decrease in multiple points of immobilization undergone by functional proteins. Finally, comparisons between rheological data and kinetics data showed that the degree of viscosity exhibited by protein films has a negative influence on attached protein layers, while enhanced protein hydration levels (assessed piezoelectrically from data obtained in Paper 1) has a positive effect on those surfaces comprising rigidly bound protein layers.

Asunto(s)

RESUMEN

One of the challenges in electrochemical biosensor design is gaining a fundamental knowledge of the processes underlying immobilisation of the molecules onto the electrode surface. This is of particular importance in biocomposite sensors where concerns have arisen as to the nature of the interaction between the biological and synthetic molecules immobilised. We examined the use of the Quartz Crystal Microbalance with Dissipation (QCM-D) as a tool for fundamental analyses of a model sensor constructed by the immobilisation of cobalt(II) phthalocyanine (TCACoPc) and glucose oxidase (GOx) onto a gold-quartz electrode (electrode surface) for the enhanced detection of glucose. The model sensor was constructed in aqueous phase and covalently linked the gold surface to the TCACoPc, and the TCACoPc to the GOx, using the QCM-D. The aqueous metallophthalocyanine (MPc) formed a multi-layer over the surface of the electrode, which could be removed to leave a monolayer with a mass loading that compared favourably to the theoretical value expected. Analysis of frequency and dissipation plots indicated covalent attachment of glucose oxidase onto the metallophthalocyanine layer. The amount of GOx bound using the model system compared favourably to calculations derived from the maximal amperometric functioning of the electrochemical sensor (examined in previously-published literature, Mashazi, P.N., Ozoemena, K.I., Nyokong, T., 2006. Electrochim. Acta 52, 177-186), but not to theoretical values derived from dimensions of GOx as established by crystallography. The strength of the binding of the GOx film with the TCACoPc layer was tested by using 2% SDS as a denaturant/surfactant, and the GOx film was not found to be significantly affected by exposure to this. This paper thus showed that QCM-D can be used in order to model essential processes and interactions that dictate the functional parameters of a biosensor.

Asunto(s)

RESUMEN

Amitraz is a formamide acaracide used in the control of ticks and mites in livestock. An electrochemical method for the determination of total amitraz residues and its final breakdown product, 2,4-dimethylaniline, is presented. Cyclic voltammetry at a glassy carbon electrode showed the irreversible oxidation of amitraz and of 2,4-dimethylaniline. A linear current response was obtained with an extrapolated limit of detection of 2x10(-8)M for amitraz and 1x10(-8)M for 2,4-dimethylaniline. The biological degradation of amitraz and subsequent formation of 2,4-dimethylaniline was readily monitored in spent cattle dip. Amitraz and 2,4-dimethylaniline was also monitored in milk and honey samples.

RESUMEN

2,4-Dimethylaniline is a recalcitrant degradant of the pesticide amitraz and is also an industrial pollutant which is genotoxic, teratogenic and carcinogenic. The biological degradation of 2,4-dimethylaniline was examined and monitored by cyclic voltammetry. Pseudomonas species isolated from cattle dip tanks initially metabolized 2,4-dimethylaniline by oxidative deamination, following a degradation pathway via a 3-methylcatechol intermediate. The bacteria were capable of utilizing 2,4-dimethylaniline as a nitrogen source and, following deamination, as a carbon source. The formation of the metabolite, 3-methylcatechol, was monitored and confirmed by voltammetric monitoring.

Asunto(s)

RESUMEN

The widespread use of the pesticide amitraz for pest control of crops, livestock and honeybees has warranted several studies aimed at understanding the degradation of this compound during storage and use. In particular the degradation of amitraz and the nature of the toxicologically significant intermediates formed owing to pH and solvent type has been examined. In this study we report on the use of electrochemical methods to monitor amitraz degradation and to identify the major intermediates formed. While this study examines the use of rapid voltammetric methods for such analyses, it also resolves earlier studies showing the rapid degradation of amitraz to 2,4-dimethylaniline without formation of intermediates first, and also suggests that the degradation of amitraz to 2,4-dimethylphenylformamide and to 2,4-dimethylaniline is more rapid than previously observed at pH above 3. These studies also showed that amitraz degrades to dimethylphenylformamide in ethanol and methanol, and is stable in both acetonitrile and dimethylsulphoxide.

Asunto(s)

RESUMEN

A potential new metabolic pathway of melatonin biotransformation is described in this investigation. Melatonin was found to directly scavenge hydrogen peroxide (H(2)O(2)) to form N(1)-acetyl-N(2)-formyl-5-methoxykynuramine and, thereafter this compound could be enzymatically converted to N(1)-acetyl-5-methoxykynuramine by catalase. The structures of these kynuramines were identified using proton nuclear magnetic resonance, carbon nuclear magnetic resonance, and mass spectrometry. This is the first report to reveal a possible physiological association between melatonin, H(2)O(2), catalase, and kynuramines. Melatonin scavenges H(2)O(2) in a concentration-dependent manner. This reaction appears to exhibit two distinguishable phases. In the rapid reaction phase, the interaction between melatonin and H(2)O(2) reaches equilibrium rapidly (within 5 s). The rate constant for this phase was calculated to be 2.3 x 10(6) M(-1)s(-1). Thereafter, the relative equilibrium of melatonin and H(2)O(2) was sustained for roughly 1 h, at which time the content of H(2)O(2) decreased gradually over a several hour period, identified as the slow reaction phase. These observations suggest that melatonin, a ubiquitously distributed small nonenzymatic molecule, might serve to directly detoxify H(2)O(2) in living organisms. H(2)O(2) and melatonin are present in all subcellular compartments; thus, presumably, one important function of melatonin may be complementary in function to catalase and glutathione peroxidase in keeping intracellular H(2)O(2) concentrations at steady-state levels.

Asunto(s)

RESUMEN

Melatonin, a pineal secretory product, and its precursors, tryptophan and serotonin, were examined for their metal binding affinities for both essential and toxic metals: aluminium, cadmium, copper, iron, lead, and zinc. An electrochemical technique, adsorptive stripping voltammetry, showed the varying abilities of melatonin and its precursors to bind the metals in situ. The results show that the following metal complexes were formed: aluminium with melatonin, tryptophan, and serotonin; cadmium with melatonin and tryptophan; copper with melatonin and serotonin; iron(III) with melatonin and serotonin; lead with melatonin, tryptophan, and serotonin; and zinc with melatonin and tryptophan. Iron(II) showed the formation of an in situ complex with tryptophan only. These studies suggest a further role for melatonin in the reduction of free radical generation and metal detoxification, and they may explain the accumulation of aluminium in Alzheimer's disease.

Asunto(s)