RESUMEN

The treatment of bone defects with recombinant bone morphogenetic protein-2 (BMP-2) requires high doses precluding broad clinical application. Here, a bioengineering approach is presented that strongly improves low-dose BMP-2-based bone regeneration by mobilizing healing-associated mesenchymal progenitor cells (MPCs). Smart synthetic hydrogels are used to trap and study endogenous MPCs trafficking to bone defects. Hydrogel-trapped and prospectively isolated MPCs differentiate into multiple lineages in vitro and form bone in vivo. In vitro screenings reveal that platelet-derived growth factor BB (PDGF-BB) strongly recruits prospective MPCs making it a promising candidate for the engineering of hydrogels that enrich endogenous MPCs in vivo. However, PDGF-BB inhibits BMP-2-mediated osteogenesis both in vitro and in vivo. In contrast, smart two-way dynamic release hydrogels with fast-release of PDGF-BB and sustained delivery of BMP-2 beneficially promote the healing of bone defects. Collectively, it is shown that modulating the dynamics of endogenous progenitor cells in vivo by smart synthetic hydrogels significantly improves bone healing and holds great potential for other advanced applications in regenerative medicine.

RESUMEN

BACKGROUND: Dental implants often have surface modifications that alter surface topography and chemistry to improve osseointegration and thereby increase treatment predictability. Surface contact-induced blood coagulation is associated with the onset of osseointegration. PURPOSE: To quantitatively evaluate the thrombogenicity of two commercially available dental implants that have similar surface roughness but different surface chemistry. MATERIAL AND METHODS: Two commercially available dental implants with anodized or sandblasted acid-etched surfaces were evaluated for thrombogenic properties. Thrombogenicity was assessed by incubating implants for 1 hour in fresh, partially heparinized blood followed by hemocyte quantification, microscopic evaluation, and quantification of thrombogenic biomarkers. RESULTS: Fibrin coverage was significantly higher on the anodized surface compared with the sandblasted acid-etched surface (P < 0.0001). Platelet and white blood cell attachment followed a similar pattern. The increased thrombogenicity was confirmed based on a significant increase in the levels of the coagulation cascade biomarkers, thrombin antithrombin complex, and ß-thromboglobulin (all P < 0.05). CONCLUSION: Dental implants with comparable roughness but differing surface chemistry had differing extents of blood contact activation. These data suggest that surface chemistry from anodization augments implant thrombogenicity compared with that from sandblasting and acid-etching, which could have implications for osseointegration.

Asunto(s)

RESUMEN

BACKGROUND: Long-term success and patient satisfaction of dental implant systems can only be achieved by fulfilling clinical as well as biological needs related to maintenance, aesthetics, soft tissue sealing, and osseointegration, among others. Surface properties largely contribute to the biological and clinical performance of implants and abutments. PURPOSE: To decipher the clinical and biological needs in implant dentistry. To address identified needs, next-generation dental implant and abutment surfaces are designed and characterized in vitro. MATERIALS AND METHODS: Novel implant and abutment surface designs were produced and characterized using surface chemical analysis, surface topography analysis, scanning electron microscopy, contact-angle measurements, and cell-culture experiments. RESULTS: The novel anodized implant surface was gradually anodized, increasing the surface roughness, surface enlargement, and oxide-layer thickness from platform to apex. The surface was phosphorus enriched, nonporous, and nanostructured at the collar, and showed micropores elsewhere. The novel anodized abutment surface was smooth, nanostructured, nonporous, and yellow. Pristine surfaces with high density of hydroxyl-groups were protected during storage using a removable cell-friendly layer that allowed dry packaging. CONCLUSIONS: A novel anodized implant system was developed with surface chemistry, topography, nanostructure, color, and surface energy designed to balance the clinical and biological needs at every tissue level.

Asunto(s)

RESUMEN

Single cell-laden three-dimensional (3D) microgels that can serve to mimic stem cell niches in vitro, and are therefore termed microniches, can be efficiently fabricated by droplet-based microfluidics. In this technique an aqueous polymer solution along with a highly diluted cell solution is injected into a microfluidic device to create monodisperse pre-microgel droplets that are then solidified by a polymer crosslinking reaction to obtain monodisperse single cell-laden microniches. However, problems limiting this approach studying the fate of single cells include Poisson encapsulation statistics that result in mostly empty microniches, and cells egressing from the microniches during subsequent cell culture. Here, we present a strategy to bypass Poisson encapsulation statistics in synthetic microniches by selective crosslinking of only cell-laden pre-microgel droplets. Furthermore, we show that we can position cells in the center of the microniches, and that even in protease-sensitive microniches this greatly reduces cell egress. Collectively, we present the development of a versatile protocol that allows for unprecedented efficiency in creation of synthetic protease-sensitive microniches for probing single stem cell fate in 3D.

Asunto(s)

RESUMEN

We report a microfluidic approach for one-step fabrication of polyelectrolyte microcapsules in aqueous conditions. Using two immiscible aqueous polymer solutions, we generate transient water-in-water-in-water double emulsion droplets and use them as templates to fabricate polyelectrolyte microcapsules. The capsule shell is formed by the complexation of oppositely charged polyelectrolytes at the immiscible interface. We find that attractive electrostatic interactions can significantly prolong the release of charged molecules. Moreover, we demonstrate the application of these microcapsules in encapsulation and release of proteins without impairing their biological activities. Our platform should benefit a wide range of applications that require encapsulation and sustained release of molecules in aqueous environments.

Asunto(s)

RESUMEN

Engineering in vitro tissue mimetics that resemble the corresponding living tissues requires the 3D arrangement of tissue progenitor cells and their differentiation by localized growth factor (GF) signaling cues. Recent technological advances open a large field of possibilities for the creation of complex GF arrangements. Additionally, cell-instructive biomaterials, which bind GFs by various mechanisms and release them with different kinetics depending on binding affinity, have become available. This paper describes the development of a matrix metalloproteinase (MMP)-degradable streptavidin-based linker module, which allows the release of immobilized GFs from synthetic biomimetic poly(ethylene glycol) hydrogels independently of the hydrogel degradation. The MMP-sensitive streptavidin linker is shown to efficiently bind biotinylated molecules, and as proof of concept, bone morphogenetic protein-2 (BMP-2) delivery via the MMP-degradable linker is used to induce osteogenic differentiation in C2C12 cells and mesenchymal stem cells. The results show a significantly increased net effect of proteolytically releasable BMP-2 in comparison to stably immobilized and soluble BMP-2. This study indicates that a GF delivery system directly responsive to cellular activity can have important implications for the synthesis of tissue mimetics and regenerative medicine, as it can influence the availability, the localization of effects, as well as efficacy of employed GFs.

Asunto(s)

RESUMEN

We describe an enzymatically formed chondroitin sulfate (CS) and poly(ethylene glycol) (PEG) based hybrid hydrogel system, which by tuning the architecture and composition of modular building blocks, allows the application-specific tailoring of growth factor delivery and cellular responses. CS, a negatively charged sulfate-rich glycosaminoglycan of the extracellular matrix (ECM), known for its growth factor binding and stem cell regulatory functions, is used as a starting material for the engineering of this biomimetic materials platform. The functionalization of CS with transglutaminase factor XIII specific substrate sequences is utilized to allow cross-linking of CS with previously described fibrin-mimetic TG-PEG hydrogel precursors. We show that the hydrogel network properties can be tuned by varying the degree of functionalization of CS as well as the ratio and concentrations of PEG and CS precursors. Taking advantage of TG-PEG hydrogel, compatible tagged bio-functional building blocks, including RGD peptides or matrix metalloproteinase sensitive domains, can be incorporated on demand allowing the three-dimensional culture and expansion of human bone marrow mesenchymal stem cells (BM-MSCs). The binding of bone morphogenetic protein-2 (BMP-2) in a CS concentration dependent manner and the BMP-2 release mediated osteogenic differentiation of BM-MSCs indicate the potential of CS-PEG hybrid hydrogels to promote regeneration of bone tissue. Their modular design allows facile incorporation of additional signaling elements, rendering CS-PEG hydrogels a highly flexible platform with potential for multiple biomedical applications.

Asunto(s)

RESUMEN

Over the last decades, great strides were made in the development of novel implants for the treatment of bone defects. The increasing versatility and complexity of these implant designs request for concurrent advances in means to assess in vivo the course of induced bone formation in preclinical models. Since its discovery, micro-computed tomography (micro-CT) has excelled as powerful high-resolution technique for non-invasive assessment of newly formed bone tissue. However, micro-CT fails to provide spatiotemporal information on biological processes ongoing during bone regeneration. Conversely, due to the versatile applicability and cost-effectiveness, single photon emission computed tomography (SPECT) would be an ideal technique for assessing such biological processes with high sensitivity and for nuclear imaging comparably high resolution (<1 mm). Herein, we employ modular designed poly(ethylene glycol)-based hydrogels that release bone morphogenetic protein to guide the healing of critical sized calvarial bone defects. By combined in vivo longitudinal multi-pinhole SPECT and micro-CT evaluations we determine the spatiotemporal course of bone formation and remodeling within this synthetic hydrogel implant. End point evaluations by high resolution micro-CT and histological evaluation confirm the value of this approach to follow and optimize bone-inducing biomaterials.

Asunto(s)

RESUMEN

The in vitro formation of physiologically relevant engineered tissues is still limited by the availability of adequate growth-factor-presenting cell-instructive biomaterials, allowing simultaneous and three-dimensionally localized differentiation of multiple tissue progenitor cells. Together with ever improving technologies such as microfluidics, printing, or lithography, these biomaterials could provide the basis for generating provisional cellular constructs, which can differentiate to form tissue mimetics. Although state-of-the-art biomaterials are endowed with sophisticated modules for time- and space-controlled positioning and release of bioactive molecules, reports on 3D arrangements of differentiation-inducing growth factors are scarce. This paper describes the stable and localized immobilization of biotinylated bioactive molecules to a modular, Factor XIII-cross-linked poly(ethylene glycol) hydrogel platform using a genetically engineered streptavidin linker. Linker incorporation is demonstrated by Western blot, and streptavidin functionality is confirmed by capturing biotinylated alkaline phosphatase (ALP). After optimizing bone morphogenetic protein 2 (BMP-2) biotinylation, streptavidin-modified hydrogels are able to bind and present bioactive BMP-2-biotin. Finally, with this immobilization scheme for BMP-2, the specific osteogenic differentiation of mesenchymal stem cells is demonstrated by inducing ALP expression in confined 3D areas. In future, this platform together with other affinity-based strategies will be useful for the local incorporation of various growth factors for engineering cell-responsive constructs.

Asunto(s)

RESUMEN

Control of pH gradient profile at the electrode-electrolyte interfaces allows the control of the enzymatic PEG-hydrogel polymerization. By tuning the solution pH, buffer capacity, and the applied current, the extent of the local inhibition and confinement of the Factor XIII-mediated polymerization of PEG are controlled. This technology opens new perspectives for the production of 3D-structured biological microenvironments.

Asunto(s)

RESUMEN

The physicochemical properties of hydrogels can be manipulated in both space and time through the controlled application of a light beam. However, methods for hydrogel photopatterning either fail to maintain the bioactivity of fragile proteins and are thus limited to short peptides, or have been used in hydrogels that often do not support three-dimensional (3D) cell growth. Here, we show that the 3D invasion of primary human mesenchymal stem cells can be spatiotemporally controlled by micropatterning the hydrogel with desired extracellular matrix (ECM) proteins and growth factors. A peptide substrate of activated transglutaminase factor XIII (FXIIIa)--a key ECM crosslinking enzyme--is rendered photosensitive by masking its active site with a photolabile cage group. Covalent incorporation of the caged FXIIIa substrate into poly(ethylene glycol) hydrogels and subsequent laser-scanning lithography affords highly localized biomolecule tethering. This approach for the 3D manipulation of cells within gels should open up avenues for the study and manipulation of cell signalling.

Asunto(s)

RESUMEN

The precise manipulation of growth factor signaling is central to the progress of tissue engineering. Methods for direct time-resolved activation of signaling pathways through controlled receptor dimerization have been reported; however, these suffer from the risks associated with gene transfer. Here we present an alternative gene transfer-free approach in the form of a protein switch featuring pharmacologically controlled ON-OFF regulation of growth factor activity. The reversible operation of the switch enables stimulation of target processes within a defined period of time. The protein switch provides a means for both studying and manipulating signaling processes, and is thus believed to be a valuable tool for basic research as well as tissue engineering and biomedical applications.

Asunto(s)

RESUMEN

The caging of small molecules has revolutionized biological research by providing a means to regulate a wide range of processes. Here we report on a generic pharmacological method to cage proteins in a similar fashion. The present approach is of value in both fundamental and applied research, e.g. in tissue engineering.

Asunto(s)

Asunto(s)

RESUMEN

The regeneration of large bone defects caused by trauma or disease remains a significant clinical problem. Although osteoinductive growth factors such as bone morphogenetic proteins have entered clinics, transplantation of autologous bone remains the gold standard to treat bone defects. The effective treatment of bone defects by protein therapeutics in humans requires quantities that exceed the physiological doses by several orders of magnitude. This not only results in very high treatment costs but also bears considerable risks for adverse side effects. These issues have motivated the development of biomaterials technologies allowing to better control biomolecule delivery from the solid phase. Here we review recent approaches to immobilize biomolecules by affinity binding or by covalent grafting to biomaterial matrices. We focus on biomaterials concepts that are inspired by extracellular matrix (ECM) biology and in particular the dynamic interaction of growth factors with the ECM. We highlight the value of synthetic, ECM-mimicking matrices for future technologies to study bone biology and develop the next generation of 'smart' implants.

Asunto(s)

RESUMEN

OBJECTIVE: The concept of vascular pruning, the "cuting-off" of vessels, is gaining importance due to expansion of angio-modulating therapies. The proangiogenic effects of vascular endothelial growth factor (VEGF) are broadly described, but the mechanisms of structural alterations by its downregulation are not known. METHODS AND RESULTS: VEGF(165)-releasing hydrogels were applied onto the chick chorioallantoic membrane on embryonic day 10. The hydrogels, designed to completely degrade within 2 days, caused high-level VEGF presentation followed by abrupt VEGF withdrawal. Application of VEGF resulted in a pronounced angiogenic response within 24 hours. The drastic decrease in level of exogenous VEGF-A within 48 hours was corroborated by enzyme-linked immunosorbent assay. Following this VEGF withdrawal we observed vasculature adaptation by means of intussusception, including intussusceptive vascular pruning. As revealed on vascular casts and serial semithin sections, intussusceptive vascular pruning occurred by emergence of multiple eccentric pillars at bifurcations. Time-lapse in vivo microscopy has confirmed the de novo occurrence of transluminal pillars and their capability to induce pruning. Quantitative evaluation corroborated an extensive activation of intussusception associated with VEGF withdrawal. CONCLUSIONS: Diminution of VEGF level induces vascular tree regression by intussusceptive vascular pruning. This observation may allude to the mechanism underlying the "normalization" of tumor vasculature if treated with antiangiogenic drugs. The mechanism described here gives new insights into the understanding of the processes of vasculature regression and hence provides new and potentially viable targets for antiangiogenic and/or angio-modulating therapies during various pathological processes.

Asunto(s)

RESUMEN

Maintenance of specific heterochromatic domains is crucial for genome stability. In eukaryotic cells, a fraction of the tandem-repeated ribosomal RNA (rRNA) genes is organized in the heterochromatic structures. The principal determinant of rDNA silencing is the nucleolar remodelling complex, NoRC, that consists of TIP5 (TTF-1-interacting protein-5) and the ATPase SNF2h. Here we showed that TIP5 not only mediates the establishment of rDNA silencing but also the formation of perinucleolar heterochromatin that contains centric and pericentric repeats. Our data indicated that the TIP5-mediated heterochromatin is indispensable for stability of silent rRNA genes and of major and minor satellite repeats. Moreover, depletion of TIP5 impairs rDNA silencing, upregulates rDNA transcription levels and induces cell transformation. These findings point to a role of TIP5 in protecting genome stability and suggest that it can play a role in the cellular transformation process.

Asunto(s)

RESUMEN

Selection of mammalian high-producer cell lines remains a major challenge for the biopharmaceutical manufacturing industry. Ribosomal RNA (rRNA) genes encode the major component of the ribosome but many rRNA gene copies are not transcribed due to epigenetic silencing by the nucleolar remodelling complex (NoRC) [6], which may limit the cell's full production capacity. Here we show that the knockdown of TIP5, a subunit of NoRC, decreases the number of silent rRNA genes, upregulates rRNA transcription, enhances ribosome synthesis and increases production of recombinant proteins. However, general enhancement of rRNA transcription rate did not stimulate protein synthesis. Our data demonstrates that the number of transcriptionally competent rRNA genes limits efficient ribosome synthesis. Epigenetic engineering of ribosomal RNA genes offers new possibilities for improving biopharmaceutical manufacturing and provides novel insights into the complex regulatory network which governs the translation machinery in normal cellular processes as well as in pathological conditions like cancer.

Asunto(s)