RESUMEN

The spin angular momentum (SAM) of an elliptically or circularly polarized light beam can be transferred to matter to drive a spinning motion. It is counterintuitive to find that a light beam without SAM can also cause the spinning of microparticles. Here, we demonstrate controllable spinning of birefringent microparticles via a tightly focused radially polarized vortex beam that has no SAM prior to focusing. To this end, the orbital Hall effect is proposed to control the radial separation of two spin components in the focused field, and tunable transfer of local SAM to microparticles is achieved by manipulating the twisted wavefront of the source light. Our work broadens the perspectives for controllable exertion of optical torques via the spin-orbit interactions.

RESUMEN

Optical tweezers provide a powerful tool to trap and manipulate living cells, which is expected to help people gain physiological insights at single-cell level. However, trapping and manipulating single cells under crowded environments, such as blood vessels and lymph nodes, is still a challenging task. To overcome this issue, an annular beam formed by the far-field Bessel beam is introduced to serve as an optical shield to isolate the target cells from being disturbed. With this scheme, we successfully trapped and manipulated single blood cells in a crowded environment. Furthermore, we demonstrated manipulation of two lymphocytes ejected from a lymph node independently with dual-trap optical tweezers, which paves the way for exploring cell interactions under living conditions. Such technique might be helpful in the study of how natural killer cells response to virus-infected cells or cancer cells.

RESUMEN

Multiplexing multiple orbital angular momentum (OAM) channels enables high-capacity optical communication. However, optical scattering from ambient microparticles in the atmosphere or mode coupling in optical fibers significantly decreases the orthogonality between OAM channels for demultiplexing and eventually increases crosstalk in communication. Here, we propose a novel scattering-matrix-assisted retrieval technique (SMART) to demultiplex OAM channels from highly scattered optical fields and achieve an experimental crosstalk of -13.8 dB in the parallel sorting of 24 OAM channels after passing through a scattering medium. The SMART is implemented in a self-built data transmission system that employs a digital micromirror device to encode OAM channels and realize reference-free calibration simultaneously, thereby enabling a high tolerance to misalignment. We successfully demonstrate high-fidelity transmission of both gray and color images under scattering conditions at an error rate of <0.08%. This technique might open the door to high-performance optical communication in turbulent environments.

RESUMEN

Optical tweezers have been used to trap and manipulate microparticles within living animals. When the optical trap is constructed with an oil-immersion objective, it suffers from spherical aberration. There have been many investigations on the influence of spherical aberration when the particles are trapped in a water medium. However, the dependence of optical force on trapping depth is still ambiguous when the trapped particles are immersed in a high refractive index medium (such as biological tissue, refractive index solution) in experiments. In this paper, the microparticles are immersed in an aqueous solution of glycerol to mimic the cells within biological tissue. As the trapping laser is focused into the specimen, spherical aberration is introduced, degrading the optical trapping performance. It is similar to trapping in water; altering the effective tube length can also compensate for the spherical aberration of the optical trap in a high refractive index medium. Finally, the cells in living mice are trapped by the optical tweezers with the help of spherical aberration compensation.

Asunto(s)

RESUMEN

We present an experimental study on oscillation of absorbing particles at the water-air interface. The oscillation is induced by laser tweezers, which are generated with a high numerical aperture objective. When the laser beam is tightly focused at the water-air interface, the optical gradient force attracts the particles to the spot center, and the laser heating of particles results in a strong thermal gradient that drives the particles to leave the spot center. Under the action of thermal and optical gradient force together, the absorbing particles oscillate at the water-air interface.

RESUMEN

In optical tweezers, a piezo-stage (PZT) is widely used to precisely position samples for force clamp, calibrating optical trap and stretching DNA. For a trapped bead in solution, the oscillation response of PZT is vital for all kinds of applications. A coupling ratio, actual amplitude to nominal amplitude, can be calibrated by power spectral density during sinusoidal oscillations. With oscillation frequency increasing, coupling ratio decreases in both x- and y-directions, which is also confirmed by the calibration with light scattering of scanning two aligned beads on slide. Those oscillation responses are related with deformability of chamber and the intrinsic characteristics of PZT. If we take nominal amplitude as actual amplitude for sinusoidal oscillations at 50 Hz, the amplitude is overestimated ~2 times in x-direction and ~3 times in y-direction. That will lead to huge errors for subsequent calibrations.

RESUMEN

Here, we report on experimental observations of various Lommel modes that possess distinct diffraction-free behaviors. The binary amplitude masks are designed to accurately encode the complex field information with the superpixel method. Then, the generation of the desired beams is demonstrated with these binary patterns projected onto the digital micromirrors device (DMD). Remarkably, we find that the field distribution and orbital angular momentum can be continuously engineered by tuning the beam parameters. Furthermore, the shape-invariant feature of such beams is verified by their far-field ring-like structures. Our observations are in good accordance with the theoretical predictions, and our methods may find potential applications in optical guiding and imaging. Moreover, apart from the DMD, the binary amplitude hologram can also be presented with well-fabricated elements, and thus, our method will also enable new applications for surface plasmon polaritons as well as electron beams.

RESUMEN

Recently, V. V. Kotlyar et al. [Opt. Lett.39, 2395 (2014)] have theoretically proposed a novel kind of three-parameter diffraction-free beam with a crescent profile, namely, the asymmetric Bessel (aB) beam. The asymmetry degree of such nonparaxial modes was shown to depend on a nonnegative real parameter c. We present a more generalized asymmetric Bessel mode in which the parameter c is a complex constant. This parameter controls not only the asymmetry degree of the mode but also the orientation of the optical crescent, and affects the energy distribution and orbital angular momentum (OAM) of the beam. As a proof of concept, the high-quality generation of asymmetric Bessel-Gauss beams was demonstrated with the super-pixel method using a digital micromirror device (DMD). We investigated the near-field properties as well as the far field features of such beams, and the experimental observations were in good agreement with the theoretical predictions. Additionally, we provided an effective way to control the beam's asymmetry and orientation, which may find potential applications in light-sheet microscopy and optical manipulation.

RESUMEN

The power spectrum density (PSD) has long been explored for calibrating optical tweezers stiffness. Fast Fourier Transform (FFT) based spectral estimator is typically used. This approach requires a relatively longer data acquisition time to achieve adequate spectral resolution. In this paper, an autoregressive (AR) model is proposed to obtain the Spectrum Density using a limited number of samples. According to our method, the arithmetic model has been established with burg arithmetic, and the final prediction error criterion has been used to select the most appropriate order of the AR model, the power spectrum density has been estimated based the AR model. Then, the optical tweezers stiffness has been determined with the simple calculation from the power spectrum. Since only a small number of samples are used, the data acquisition time is significantly reduced and real-time stiffness calibration becomes feasible. To test this calibration method, we study the variation of the trap stiffness as a function of the parameters of the data length and the trapping depth. Both of the simulation and experiment results have showed that the presented method returns precise results and outperforms the conventional FFT method when using a limited number of samples.

RESUMEN

We demonstrate optical trapping of red blood cells (RBCs) in living animals by using a water immersion objective. First, the cells within biological tissue are mimicked by the particles immersed in aqueous solutions of glycerol. The optical forces depending on trapping depth are investigated when a parallel laser beam enters the water immersion objective. The results show that the optical forces vary with trapping depth, and the optimal trapping depth in aqueous solutions of glycerol (n=1.39) is 50 µm. Second, the optimal trapping depth in aqueous solutions of glycerol can be changed by altering the actual tube length of the water immersion objective. Finally, we achieved optical trapping and manipulation of RBCs in living mice.

Asunto(s)

RESUMEN

We experimentally demonstrated Bessel-like beams utilizing digital micromirror device (DMD). DMD with images imitating the equivalent axicon can shape the collimated Gaussian beam into Bessel beam. We reconstructed the 3D spatial field of the generated beam through a stack of measured cross-sectional images. The output beams have the profile of Bessel function after intensity modulation, and the beams extend at least 50 mm while the lateral dimension of the spot remains nearly invariant. Furthermore, the self-healing property has also been investigated, and all the experimental results agree well with simulated results numerically calculated through beam propagation method. Our observations demonstrate that the DMD offers a simple and efficient method to generate Bessel beams with distinct nondiffracting and self-reconstruction behaviors. The generated Bessel beams will potentially expand the applications to the optical manipulation and high-resolution fluorescence imaging owing to the unique nondiffracting property.

Asunto(s)

RESUMEN

The recent development of non-invasive imaging techniques has enabled the visualization of molecular events underlying cellular processes in live cells. Although microscopic objects can be readily manipulated at the cellular level, additional physiological insight is likely to be gained by manipulation of cells in vivo, which has not been achieved so far. Here we use infrared optical tweezers to trap and manipulate red blood cells within subdermal capillaries in living mice. We realize a non-contact micro-operation that results in the clearing of a blocked microvessel. Furthermore, we estimate the optical trap stiffness in the capillary. Our work expands the application of optical tweezers to the study of live cell dynamics in animals.

Asunto(s)

RESUMEN

For a triaxial ellipsoid in an optical trap with spherical aberration, the optical forces, torque and stress are analyzed using vectorial ray tracing. The torque will automatically regulate ellipsoid's long axis parallel to optic axis. For a trapped ellipsoid with principal axes in the ratio 1:2:3, the high stress distribution appears in x-z plane. And the optical force at x-axis is weaker than at y-axis due to the shape size. While the ellipsoid departs laterally from trap center, the measurable maximum transverse forces will be weakened due to axial equilibrium and affected by inclined orientation. For an appropriate ring beam, the maximum optical forces are strong in three dimensions, thus, this optical trap is appropriate to trap cells for avoiding damage from laser.

RESUMEN

A digital micromirror device (DMD) modulates laser intensity through computer control of the device. We experimentally investigate the performance of the modulation property of a DMD and optimize the modulation procedure through image correction. Furthermore, Laguerre-Gaussian (LG) beams with different topological charges are generated by projecting a series of forklike gratings onto the DMD. We measure the field distribution with and without correction, the energy of LG beams with different topological charges, and the polarization property in sequence. Experimental results demonstrate that it is possible to generate LG beams with a DMD that allows the use of a high-intensity laser with proper correction to the input images, and that the polarization state of the LG beam differs from that of the input beam.

RESUMEN

Birefringent particles rotate when trapped in elliptically polarized light. When an infinity corrected oil-immersion objective is used for trapping, rotation of birefringent particles in optical tweezers based on an infinity optical microscope is affected by the spherical aberration at the glass-water interface. The maximum rotation rate of birefringent particles occurs close to the coverslip, and the rotation rate decreases dramatically as the trapped depth increases. We experimentally demonstrate that spherical aberration can be compensated by using a finite-distance-corrected objective to trap and rotate the birefringent particles. It is found that the trapped depth corresponding to the maximum rotation rate is 50 microm, and the rotation rates at deep trapped depths are improved.

RESUMEN

Traditional solid geometry ray-tracing method is complex in analyzing the orientation of gradient forces and calculating incident angle of optic rays upon a microsphere. We present a new ray-tracing methodology based on spatial analytic geometry in the ray-optic model. For a single ray upon a microsphere, the directions of transmission and trapping forces are depicted by spatial vectors in a Cartesian coordinate system. At the same time, the polarized direction of a single focused ray can be transformed by a matrix of rotational coordinates. According to the relations of vectors, the trapping forces can be expressed identically. We use this new method to discuss differences of trapping forces in the cases of various states of unpolarized and polarized beams, and also show the reasons for differences in transverse force between measurement and theoretical results. Our simulative results show that this method can be applied identically to calculating both transverse and axial trapping forces, and also for different polarizations of a laser beam.

RESUMEN

Lymphocyte function associated antigen-1 (CD11a/CD18, LFA-1) plays an important role in the structure of the immunological synapse and is required for efficient lysis of cytotoxic T lymphocytes (CTLs) and natural killer (NK) cells. To study the activation mode of LFA-1 on the NK cell surface, optical tweezers were used in the work. As an emerging technology, optical tweezers are widely used to manipulate microscopic objects and measure the forces of molecular interactions in the field of biological research. In our study, a new platform was constructed to study the single molecular behavior of receptor on cell surface using optical tweezers. Based on the platform, the interaction between an NK cell and a polystyrene microsphere coated with anti-LFA-1 antibody was observed. The result confirmed that the adhesion forces between an NK cell and a polystyrene bead were time-dependent. According to our findings, we propose that anti-LFA-1 antibody may cause the clustering of LFA-1 on NK cell surface.

Asunto(s)