RESUMEN
SUMMARY: A highly sensitive assay for rapidly screening-out Mycobacterium bovis in contaminated samples was developed based on electrochemical genosensing. The assay consists of specific amplification and double-tagging of the IS6110 fragment, highly related to M. bovis, followed by electrochemical detection of the amplified product. PCR amplification was carried out using a labeled set of primers and resulted in a amplicon tagged at each terminus with both biotin and digoxigenin. Two different electrochemical platforms for the detection of the double-tagged amplicon were evaluated: (i) an avidin biocomposite (Av-GEB) and (ii) a magneto sensor (m-GEC) combined with streptavidin magnetic beads. In both cases, the double- tagged amplicon was immobilized through its biotinylated end and electrochemically detected, using an antiDig-HRP conjugate, through its digoxigenin end. The assay was determined to be highly sensitive, based on the detection of 620 and 10 fmol of PCR amplicon using the Av-GEB and m-GEC strategies, respectively. Moreover, the m-GEC assay showed promising features for the detection of M. bovis on dairy farms by screening for the presence of the bacterium's DNA in milk samples. The obtained results are discussed and compared with respect to those of inter-laboratory PCR assays and tuberculin skin testing.
Asunto(s)
Técnicas Bacteriológicas/métodos , Técnicas Electroquímicas/métodos , Tamizaje Masivo/métodos , Leche/microbiología , Mycobacterium bovis/aislamiento & purificación , Reacción en Cadena de la Polimerasa/métodos , Animales , Biotina/química , Cartilla de ADN/química , Cartilla de ADN/genética , Elementos Transponibles de ADN , ADN Bacteriano/genética , Digoxigenina/química , Mycobacterium bovis/genética , Sensibilidad y Especificidad , Coloración y Etiquetado/métodosRESUMEN
A highly sensitive assay for rapidly screening-out Mycobacterium bovis in contaminated samples was developed based on electrochemical genosensing. The assay consists of specific amplification and double-tagging of the IS6110 fragment, highly related to M. bovis, followed by electrochemical detection of the amplified product. PCR amplification was carried out using a labeled set of primers and resulted in a amplicon tagged at each terminus with both biotin and digoxigenin. Two different electrochemical platforms for the detection of the double-tagged amplicon were evaluated: (i) an avidin biocomposite (Av-GEB) and (ii) a magneto sensor (m-GEC) combined with streptavidin magnetic beads. In both cases, the double- tagged amplicon was immobilized through its biotinylated end and electrochemically detected, using an antiDig-HRP conjugate, through its digoxigenin end. The assay was determined to be highly sensitive, based on the detection of 620 and 10 fmol of PCR amplicon using the Av-GEB and m-GEC strategies, respectively. Moreover, the m-GEC assay showed promising features for the detection of M. bovis on dairy farms by screening for the presence of the bacterium's DNA in milk samples. The obtained results are discussed and compared with respect to those of inter-laboratory PCR assays and tuberculin skin testing (AU)
No disponible
Asunto(s)
Animales , Técnicas Bacteriológicas/métodos , Tamizaje Masivo/métodos , Leche , Mycobacterium bovis/aislamiento & purificación , Reacción en Cadena de la Polimerasa/métodos , Mycobacterium bovis/genética , Sensibilidad y Especificidad , Coloración y Etiquetado/métodosRESUMEN
A very simple and rapid method for the detection of Salmonella in milk is reported. In this approach, the bacteria are captured and preconcentrated from milk samples with magnetic beads through an immunological reaction. A second polyclonal antibody labeled with peroxidase is used as serological confirmation with electrochemical detection based on a magneto-electrode. The 'IMS/m-GEC electrochemical immunosensing' approach shows a limit of detection of 5 x 10(3) and 7.5 x 10(3)CFU mL(-1) in LB and in milk diluted 1/10 in LB broth, respectively, in 50 min without any pretreatment. If the skimmed-milk is preenriched for 6h, the method is able to detect as low as 1.4 CFU mL(-1), while if it is preenriched for 8h, as low as 0.108 x CFU mL(-1) (2.7 x CFU in 25 g of milk, in 5 samples of 5 mL) are detected accordingly with the legislation. Moreover, the method is able to clearly distinguish between food pathogenic bacteria such as Salmonella and Escherichia coli. The features of this approach are discussed and compared with classical culture methods.
Asunto(s)
Técnicas Biosensibles/instrumentación , Electroquímica/instrumentación , Análisis de los Alimentos/instrumentación , Contaminación de Alimentos/análisis , Separación Inmunomagnética/instrumentación , Leche/microbiología , Salmonella/aislamiento & purificación , Animales , Bovinos , Electrodos , Diseño de Equipo , Análisis de Falla de Equipo , TransductoresRESUMEN
A rapid and sensitive method for the detection of food pathogenic bacteria is reported. In this approach, the bacteria are captured and preconcentrated from food samples with magnetic beads by immunological reaction with the specific antibody against Salmonella. After the lysis of the captured bacteria, further amplification of the genetic material by PCR with a double-tagging set of primers is performed to confirm the identity of the bacteria. Both steps are rapid alternatives to the time-consuming classical selective enrichment and biochemical/serological tests. The double-tagged amplicon is then detected by electrochemical magneto genosensing. The "IMS/double-tagging PCR/m-GEC electrochemical genosensing" approach is used for the first time for the sensitive detection of Salmonella artificially inoculated into skim milk samples. A limit of detection of 1 CFU mL(-1) was obtained in 3.5 h without any pretreatment, in LB broth and in milk diluted 1/10 in LB. If the skim milk is pre-enriched for 6 h, the method is able to feasibly detect as low as 0.04 CFU mL(-1) (1 CFU in 25 g of milk) with a signal-to-background ratio of 20. Moreover, the method is able to clearly distinguish between pathogenic bacteria such as Salmonella and Escherichia coli. The features of this approach are discussed and compared with classical culture methods and PCR-based assay.
Asunto(s)
Técnicas Biosensibles/métodos , Inmunoensayo/métodos , Magnetismo , Reacción en Cadena de la Polimerasa/métodos , Salmonella enterica/genética , Salmonella enterica/aislamiento & purificación , Animales , Técnicas de Cultivo , ADN Bacteriano/análisis , ADN Bacteriano/química , ADN Bacteriano/genética , ADN Bacteriano/aislamiento & purificación , Electroquímica , Microbiología de Alimentos , Genoma Bacteriano/genética , Calor , Humanos , Microscopía Electrónica de Rastreo , Leche/microbiología , Salmonella enterica/citología , Salmonella enterica/inmunología , Factores de TiempoRESUMEN
A novel material for electrochemical biosensing based on rigid conducting gold nanocomposite (nano-AuGEC) is presented. Islands of chemisorbing material (gold nanoparticles) surrounded by nonreactive, rigid, and conducting graphite epoxy composite are thus achieved to avoid the stringent control of surface coverage parameters required during immobilization of thiolated oligos in continuous gold surfaces. The spatial resolution of the immobilized thiolated DNA was easily controlled by merely varying the percentage of gold nanoparticles in the composition of the composite. As low as 9 fmol (60 pM) of synthetic DNA were detected in hybridization experiments when using a thiolated probe. Moreover, for the first time a double tagging PCR strategy was performed with a thiolated primer for the detection of Salmonella sp., one of the most important foodborne pathogens affecting food safety. This assay was performed by double-labeling the amplicon during the PCR with a -DIG and -SH set of labeled primers. The thiolated end allows the immobilization of the amplicon on the nano-AuGEC electrode, while digoxigenin allows the electrochemical detection with the antiDIG-HRP reporter in the femtomole range. Rigid conducting gold nanocomposite represents a good material for the improved and oriented immobilization of biomolecules with excellent transducing properties for the construction of a wide range of electrochemical biosensors such as immunosensors, genosensors, and enzymosensors.