Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 4 de 4
Filtrar
Más filtros











Base de datos
Intervalo de año de publicación
1.
Environ Sci Technol ; 56(9): 5898-5909, 2022 May 03.
Artículo en Inglés | MEDLINE | ID: mdl-35435682

RESUMEN

In recent years, the fight against climate change and the mitigation of the impact of fluorinated gases (F-gases) on the atmosphere is a global concern. Development of technologies that help to efficiently separate and recycle hydrofluorocarbons (HFCs) at the end of the refrigeration and air conditioning equipment life is a priority. The technological development is important to stimulate the F-gas capture, specifically difluoromethane (R-32) and 1,1,1,2-tetrafluoroethane (R-134a), due to their high global warming potential. In this work, the COSMO-RS method is used to analyze the solute-solvent interactions and to determine Henry's constants of R-32 and R-134a in more than 600 ionic liquids. The three most performant ionic liquids were selected on the basis of COSMO-RS calculations, and F-gas absorption equilibrium isotherms were measured using gravimetric and volumetric methods. Experimental results are in good agreement with COSMO-RS predictions, with the ionic liquid tributyl(ethyl)phosphonium diethyl phosphate, [P2444][C2C2PO4], being the salt presenting the highest absorption capacities in molar and mass units compared to salts previously tested. The other two ionic liquids selected, trihexyltetradecylphosphonium glycinate, [P66614][C2NO2], and trihexyl(tetradecyl)phosphonium 2-cyano-pyrrole, [P66614][CNPyr], may be competitive as far as their absorption capacities are concerned. Future works will be guided on evaluating the performance of these ionic liquids at an industrial scale by means of process simulations, in order to elucidate the role in process efficiency of other relevant absorbent properties such as viscosity, molar weight, or specific heat.

2.
J Phys Chem B ; 123(30): 6579-6587, 2019 Aug 01.
Artículo en Inglés | MEDLINE | ID: mdl-31291103

RESUMEN

Binary mixtures of the ionic liquids 1-ethyl-3-methylimidazolium dicyanamide and tributyl(methyl)ammonium dicyanamide, [C2C1im]x[N4441](1-x)[N(CN)2], are studied by means of their excess properties (enthalpy and volume), their viscosity, and their Raman spectra. The mixtures exhibit positive values of excess volume VE and excess enthalpy HE. The plot of the logarithm of viscosity as a function of composition is consistent with the finding HE > 0. The excess thermodynamic properties of the ionic liquid mixtures are compared with well-known results for binary mixtures of (high-temperature) molten salts. The asymmetry of the curve HE versus composition is reproduced by considering the volumetric fraction of the [C2C1im]x[N4441](1-x)[N(CN)2] mixtures according to basic results of the theory of regular solutions. The anion totally symmetric stretching mode νs(C≡N) was used to probe the local environment around the anion in a Raman spectroscopy investigation of the [C2C1im]x[N4441](1-x)[N(CN)2] mixtures as a function of the composition. The Raman band shape (peak frequency and bandwidth) of the νs(C≡N) mode changes as expected from the fluctuation of concentration around the probe oscillator according to models for vibrational spectroscopy of liquid mixtures. This thermodynamic and spectroscopic study leads to the classification of the [C2C1im]x[N4441](1-x)[N(CN)2] mixture as a regular solution. The application of the regular solution equation for HE to other ionic liquid binary mixtures is discussed.

3.
Phys Chem Chem Phys ; 18(41): 28901-28910, 2016 Oct 19.
Artículo en Inglés | MEDLINE | ID: mdl-27723855

RESUMEN

An investigation comprising experimental techniques (absorption capacity of SO2 and vibrational spectroscopy) and molecular simulations (thermodynamics, structure, and dynamics) has been performed for the polymer poly(ethylene oxide) (PEO), the ionic liquid butyltrimethylammonium bis(trifluoromethylsulfonyl)imide ([N4111][Tf2N]) and their mixtures as sulfur dioxide (SO2) absorbing materials. The polymer PEO has higher capacity to absorb SO2 than the neat ionic liquid, whereas the mixtures presented intermediary absorption capacities. The band assigned to the symmetric stretching band of SO2 at ca. 1140 cm-1, which is considered a spectroscopic probe for the strength of SO2 interactions with its neighborhood, shifts to lower wavenumbers as more negative total interaction energy values of SO2 were evaluated from the simulations. The solvation free energy of SO2, ΔGsol, correlates linearly with the absorption capacity of SO2. The negative values of ΔGsol are due to negative and positive values of enthalpy and entropy, respectively. In the ionic liquid, SO2 weakens the cation-anion interactions, whereas in the mixture with a high content of PEO these interactions are slightly increased. Such effects were correlated with the relative population of cisoid and transoid conformers of Tf2N anions as revealed by Raman spectroscopy. Moreover, the presence of SO2 in the systems provokes the increase of diffusion coefficients of the absorbing species in comparison with the systems without the gas. Proper to the slow dynamics of the polymer, the diffusion coefficient of ions and SO2 diminishes with the increase of the PEO content.

4.
PLoS One ; 8(11): e80519, 2013.
Artículo en Inglés | MEDLINE | ID: mdl-24282549

RESUMEN

A biological system for the biosynthesis of nanoparticles (NPs) and uptake of copper from wastewater, using dead biomass of Hypocrea lixii was analyzed and described for the first time. The equilibrium and kinetics investigation of the biosorption of copper onto dead, dried and live biomass of fungus were performed as a function of initial metal concentration, pH, temperature, agitation and inoculum volume. The high biosorption capacity was observed for dead biomass, completed within 60 min of contact, at pH 5.0, temperature of 40 °C and agitation speed of 150 rpm with a maximum copper biosorption of 19.0 mg g(-1). The equilibrium data were better described using the Langmuir isotherm and kinetic analysis indicated that copper biosorption follows a pseudo-second-order model. The average size, morphology and location of NPs biosynthesized by the fungus were determined by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS) and transmission electron microscopy (TEM). NPs were mainly spherical, with an average size of 24.5 nm, and were synthesized extracellularly. The X-ray diffraction (XRD) analysis confirms the presence of metallic copper particles. Infrared spectroscopy (FTIR) study revealed that the amide groups interact with the particles, which was accountable for the stability of NPs. This method further confirmed the presence of proteins as stabilizing and capping agents surrounding the copper NPs. These studies demonstrate that dead biomass of Hypocrea lixii provides an economic and technically feasible option for bioremediation of wastewater and is a potential candidate for industrial-scale production of copper NPs.


Asunto(s)
Biomasa , Cobre/metabolismo , Hypocrea/metabolismo , Nanopartículas del Metal , Minería , Brasil , Calor , Concentración de Iones de Hidrógeno , Cinética , Microscopía Electrónica de Rastreo , Microscopía Electrónica de Transmisión , Espectroscopía de Fotoelectrones
SELECCIÓN DE REFERENCIAS
DETALLE DE LA BÚSQUEDA