RESUMEN
Benznidazole, a poorly soluble in water drug, is the first-line medication for the treatment of Chagas disease, but long treatment periods at high dosages cause several adverse effects with insufficient activity in the chronic phase. According to these facts, there is a serious need for novel benznidazole formulations for improving the chemotherapy of Chagas disease. Thus, this work aimed to incorporate benznidazole into lipid nanocapsules for improving its solubility, dissolution rate in different media, and permeability. Lipid nanocapsules were prepared by the phase inversion technique and were fully characterized. Three formulations were obtained with a diameter of 30, 50, and 100 nm and monomodal size distribution with a low polydispersity index and almost neutral zeta potential. Drug encapsulation efficiency was between 83 and 92 % and the drug loading was between 0.66 and 1.04 %. Loaded formulations were stable under storage for one year at 4 °C. Lipid nanocapsules were found to protect benznidazole in simulated gastric fluid and provide a sustained release platform for the drug in a simulated intestinal fluid containing pancreatic enzymes. The small size and the almost neutral surface charge of these lipid nanocarriers improved their penetration through mucus and such formulations showed a reduced chemical interaction with gastric mucin glycoproteins. LNCs. The incorporation of benznidazole in lipid nanocapsules improved the drug permeability across intestinal epithelium by 10-fold compared with the non-encapsulated drug while the exposure of the cell monolayers to these nanoformulations did not affect the integrity of the epithelium.
Asunto(s)
Nanocápsulas , Nanocápsulas/química , Liberación de Fármacos , Lípidos/química , Permeabilidad , Estabilidad de MedicamentosRESUMEN
Chagas disease is a neglected tropical disease affecting the American continent and also some regions of Europe. Benznidazole, approved by FDA, is a drug of choice but its poor aqueous solubility may lead to a low bioavailability and efficacy. Therefore, the aim of this study was to formulate nanoparticles of benznidazole for improving its solubility, dissolution and permeability. A Plackett-Burman design was applied to identify the effect of 5 factors over 4 responses. Then, a Central Composite design was applied to estimate the values of the most important factors leading to the best compromise between highest nanoprecipitation efficiency, drug solubility and lower particle size. The optimized nanoparticles were evaluated for in vitro drug release in biorelevant media, stability studies and transmission electron microscopy. Biocompatibility and permeability of nanoparticles were evaluated on the Caco-2 cell line. The findings of the optimization process indicated that concentration of drug and stabilizer influenced significantly the particle size while concentration of stabilizer and organic/water phase volume ratio mainly influenced the drug solubility. Stability studies suggested that benznidazole nanoparticles were stable after 12 months at different temperatures. Minimal interactions of those nanoparticles and mucin glycoproteins suggested favorable properties to address the intestinal mucus barrier. Cell viability studies confirmed the safety profile of the optimized formulation and showed an increased permeation through the Caco-2 cells. Thus, this study confirmed the suitability of the design of experiment and optimization approach to elucidate critical parameters influencing the quality of benznidazole nanoparticles, which could lead to a more efficient management of Chagas disease by oral route.
Asunto(s)
Enfermedad de Chagas , Nanopartículas , Nitroimidazoles , Administración Oral , Disponibilidad Biológica , Células CACO-2 , Enfermedad de Chagas/tratamiento farmacológico , Humanos , Nitroimidazoles/farmacología , Nitroimidazoles/uso terapéutico , Tamaño de la Partícula , SolubilidadRESUMEN
PURPOSE: The aim of this work was to formulate and characterize surfactant-free glibenclamide nanoparticles using Eudragit RLPO and polyethylene glycol as sole stabilizer. METHODS: Glibenclamide nanoparticles were obtained by nanoprecipitation and evaluated in terms of drug content, encapsulation efficiency, apparent saturation solubility, drug release profile, solid state and storage stability. The influence of different stirring speed on the particle size, size distribution and zeta potential of the nanoparticles was investigated. The nanoparticle biocompatibility and permeability were analyzed in vitro on Caco-2 cell line (clone HTB-37) and its interaction with mucin was also investigated. RESULTS: It was found that increasing the molecular weight of polyethylene glycol from 400 to 6000 decreased drug encapsulation, whereas the aqueous solubility and dissolution rate of the drug increased. Particle size of the nanoformulations, with and without polyethylene glycol, were between 140 and 460 nm. Stability studies confirmed that glibenclamide nanoparticles were stable, in terms of particle size, after 120 days at 4°C. In vitro studies indicated minimal interactions of glibenclamide nanoparticles and mucin glycoproteins suggesting favorable properties to address the intestinal mucus barrier. Cell viability studies confirmed the safety profile of these nanoparticles and showed an increased permeation through epithelial cells. CONCLUSION: Taking into consideration these findings, polyethylene glycol is a useful polymer for stabilizing these surfactant-free glibenclamide nanoparticles and represent a promising alternative to improve the treatment of non-insulin dependent diabetes.
Asunto(s)
Composición de Medicamentos/métodos , Gliburida/metabolismo , Hipoglucemiantes/metabolismo , Mucosa Intestinal/metabolismo , Nanopartículas/metabolismo , Tensoactivos , Células CACO-2 , Supervivencia Celular/efectos de los fármacos , Supervivencia Celular/fisiología , Evaluación Preclínica de Medicamentos/métodos , Gliburida/administración & dosificación , Gliburida/química , Humanos , Hipoglucemiantes/administración & dosificación , Hipoglucemiantes/química , Mucosa Intestinal/efectos de los fármacos , Nanopartículas/administración & dosificación , Nanopartículas/química , Tamaño de la Partícula , Polietilenglicoles/administración & dosificación , Polietilenglicoles/química , Polietilenglicoles/metabolismo , Polímeros/administración & dosificación , Polímeros/química , Polímeros/metabolismoRESUMEN
The anti-inflammatory effect of polymeric deflazacort nanocapsules (NC-DFZ) was investigated, and possible improvement of epithelial barrier function using filter grown monolayers of Calu-3 cells was assessed. NC prepared from poly(ε-caprolactone) (PCL) had a mean size around 200nm, slightly negative zeta potential (â¼-8mV), and low polydispersity index (<0.10). Encapsulation of DFZ had an efficiency of 85%. No cytotoxic effects were observed at particle concentration of 9.85×1011NC/ml, which was therefore chosen to evaluate the effect of NC-DFZ at 1% (w/v) of PCL and 0.5% (w/v) of DFZ on the epithelial barrier function of Calu-3 monolayers. Nanoencapsulated drug at 0.5% (w/v) increased transepithelial electrical resistance and decreased permeability of the paracellular marker sodium fluorescein, while non-encapsulated DFZ failed to improve these parameters. Moreover, NC-DFZ reduced the lipopolysaccharide (LPS) mediated secretion of the inflammatory marker IL-8. In vitro dissolution testing revealed controlled release of DFZ from nanocapsules, which may explain the improved effect of DFZ on the cells. These data suggest that nanoencapsulation of pulmonary delivered corticosteroids could be advantageous for the treatment of inflammatory conditions, such as asthma and chronic obstructive pulmonary diseases.
Asunto(s)
Antiinflamatorios/administración & dosificación , Barrera Alveolocapilar/efectos de los fármacos , Glucocorticoides/administración & dosificación , Nanocápsulas/administración & dosificación , Mucosa Respiratoria/efectos de los fármacos , Células A549 , Antiinflamatorios/química , Barrera Alveolocapilar/metabolismo , Línea Celular , Supervivencia Celular/efectos de los fármacos , Supervivencia Celular/fisiología , Relación Dosis-Respuesta a Droga , Glucocorticoides/química , Humanos , Mediadores de Inflamación/antagonistas & inhibidores , Mediadores de Inflamación/metabolismo , Nanocápsulas/química , Mucosa Respiratoria/metabolismoRESUMEN
The aims of this work were to increase the photostability and to reduce the skin permeation of tretinoin through nanoencapsulation. Tretinoin is widely used in the topical treatment of various dermatological diseases such as acne, psoriasis, skin cancer, and photoaging. Tretinoin-loaded lipid-core polymeric nanocapsules were prepared by interfacial deposition of a preformed polymer. Carbopol hydrogels containing nanoencapsulated tretinoin presented a pH value of 6.08±0.14, a drug content of 0.52±0.01 mg g(-1), pseudoplastic rheological behavior, and higher spreadability than a marketed formulation. Hydrogels containing nanoencapsulated tretinoin demonstrated a lower photodegradation (24.17±3.49%) than the formulation containing the non-encapsulated drug (68.64±2.92%) after 8h of ultraviolet A irradiation. The half-life of the former was seven times higher than the latter. There was a decrease in the skin permeability coefficient of the drug by nanoencapsulation, independently of the dosage form. The liquid suspension and the semisolid form provided K(p)=0.31±0.15 and K(p)=0.33±0.01 cm s(-1), respectively (p≤0.05), while the samples containing non-encapsulated tretinoin showed K(p)=1.80±0.27 and K(p)=0.73±0.12 cm s(-1) for tretinoin solution and hydrogel, respectively. Lag time was increased two times by nanoencapsulation, meaning that the drug is retained for a longer time on the skin surface.