RESUMEN

To identify compounds inhibiting the activity of the Early Growth Response (EGR)-1 DNA-binding domain, thirty-seven pyrazolines were prepared and their EGR-1 DNA-binding activities were measured. Pharmacophores were derived based on quantitative structure-activity relationship calculations. As compound 2, 1-(5-(4-methoxyphenyl)-4,5-dihydro-1H-pyrazol-3-yl)naphthalen-2-ol, showed the best inhibitory effects against the activity of the EGR-1 DNA-binding domain, the binding mode between compound 2 and EGR-1 was elucidated using in silico docking. The pharmacophores were matched to the binding modes. Electrophoretic mobility shift assays confirmed that compound 2 dose-dependently inhibited TNFα-induced EGR-1-DNA complex formation in HaCaT cells. Reverse transcription-polymerase chain reaction demonstrated that compound 2 effectively reduced the mRNA expression of EGR-1-regulated inflammatory genes, including thymic stromal lymphopoietin (TSLP), interleukin (IL)-1ß, IL-6, and IL-31, in TNFα-stimulated HaCaT cells. Therefore, compound 2 could be developed as an agent that inhibits the activity of the EGR-1 DNA-binding domain.

RESUMEN

Biopolymers are highly desirable alternatives to petrochemical-based plastics owing to their biodegradable nature. The production of bioplastics, such as polyhydroxyalkanoates (PHAs), has been widely reported using various bacterial cultures with substrates ranging from pure to biowaste-derived sugars. However, large-scale production and economic feasibility are major limiting factors. Now, using algal biomass for PHA production offers a potential solution to these challenges with a significant environmental benefit. Algae, with their unique ability to utilize carbon dioxide as a greenhouse gas (GHG) and wastewater as feed for growth, can produce value-added products in the process and, thereby, play a crucial role in promoting environmental sustainability. The sugar recovery efficiency from algal biomass is highly variable depending on pretreatment procedures due to inherent compositional variability among their cell walls. Additionally, the yields, composition, and properties of synthesized PHA vary significantly among various microbial PHA producers from algal-derived sugars. Therefore, the microalgal biomass pretreatments and synthesis of PHA copolymers still require considerable investigation to develop an efficient commercial-scale process. This review provides an overview of the microbial potential for PHA production from algal biomass and discusses strategies to enhance PHA production and its properties, focusing on managing GHGs and promoting a sustainable future.

RESUMEN

Upgrading biomass-derived bioethanol to higher-order alcohols using conventional biotechnological approaches is challenging. Herein, a novel, magnetic metal-organic-framework-based cofactor regeneration system was developed using ethanol dehydrogenase (EtDH:D46G), NADH oxidase (NOX), formolase (FLS:L482S), and nicotinamide adenine dinucleotide (NAD+) for converting rice straw-derived bioethanol to acetoin. A magnetic zeolitic imidazolate framework-8@Fe3O4/NAD+ (ZIF-8@Fe3O4/NAD+) regeneration system for cell-free cascade reactions was introduced and used to encapsulate EtDH:D46G, NOX, and FLS:L482S (ENF). ZIF-8@Fe3O4/NAD+ENF created an efficient microenvironment for three-step enzyme cascades. Under the optimized conditions, the yield of acetoin from 100 mM bioethanol using ZIF-8@Fe3O4/NAD+ENF was 90.4 %. The regeneration system showed 97.1 % thermostability at 50 °C. The free enzymes retained only 16.3 % residual conversion, compared with 91.2 % for ZIF-8@Fe3O4/NAD+ENF after ten cycles. The magnetic metal-organic-framework-based cofactor regeneration system is suitable for enzymatic cascade biotransformations and can be extended to other cascade systems for potential biotechnological applications.

Asunto(s)

RESUMEN

Hydrogen (H2), a clean and versatile energy carrier, has recently gained significant attention as a potential solution for reducing carbon emissions and promoting sustainable energy systems. The yield and efficiency of the biological H2 production process primarily depend on sterilization conditions. Various strategies, such as heat inactivation and membrane-based sterilization, have been used to achieve desirable yields via microbial fermentation. Almost every failed biotransformation process is linked to nonsterile conditions at any reaction stage. Therefore, the production of renewable biofuels as alternatives to fossil fuels is more attractive. Pure sugars have been widely documented as a costly feedstock for H2 production under sterile conditions. Biotransformation under nonsterile conditions is more desirable for stable and sustainable operation. Low-cost feeds, such as biowaste, are considered suitable alternatives, but they require appropriate sterilization to overcome the limitations of inherited or contaminating microbes during H2 production. This article describes the status of microbial fermentative processes for H2 production under nonsterile conditions and discusses strategies to improve such processes for sustainable, cleaner production.

RESUMEN

In the present investigation, an ecofriendly magnetic inorganic-protein hybrid system-based enzyme immobilization was developed using partially purified laccase from Trametes versicolor (TvLac), Fe3O4 nanoparticles, and manganese (Mn), and was successfully applied for synthetic dye decolorization in the presence of enzyme inhibitors. After the partial purification of crude TvLac, the specific enzyme activity reached 212 U∙mg total protein-1. The synthesized Fe3O4/Mn3(PO4)2-laccase (Fe3O4/Mn-TvLac) and Mn3(PO4)2-laccase (Mn-TvLac) nanoflowers (NFs) exhibited encapsulation yields of 85.5% and 90.3%, respectively, with relative activities of 245% and 260%, respectively, compared with those of free TvLac. One-pot synthesized Fe3O4/Mn-TvLac exhibited significant improvements in catalytic properties and stability compared to those of the free enzyme. Fe3O4/Mn-TvLac retained a significantly higher residual activity of 96.8% over that of Mn-TvLac (47.1%) after 10 reuse cycles. The NFs showed potential for the efficient decolorization of synthetic dyes in the presence of enzyme inhibitors. For up to five reuse cycles, Fe3O4/Mn-TvLac retained a decolorization potential of 81.1% and 86.3% for Coomassie Brilliant Blue R-250 and xylene cyanol, respectively. The synthesized Fe3O4/Mn-TvLac showed a lower acute toxicity towards Vibrio fischeri than pure Fe3O4 nanoparticles did. This is the first report of the one-pot synthesis of biofriendly magnetic protein-inorganic hybrids using partially purified TvLac and Mn.

RESUMEN

Multi-enzymatic strategies have shown improvement in bioconversion during cofactor regeneration. In this study, purified l-arabinitol 4-dehydrogenase (LAD) and nicotinamide adenine dinucleotide oxidase (Nox) were immobilized via individual, mixed, and sequential co-immobilization approaches on magnetic nanoparticles, and were evaluated to enhance the conversion of l-arabinitol to l-xylulose. Initially, the immobilization of LAD or Nox on the nanoparticles resulted in a maximum immobilization yield and relative activity of 91.4% and 98.8%, respectively. The immobilized enzymes showed better pH and temperature profiles than the corresponding free enzymes. Furthermore, co-immobilization of these enzymes via mixed and sequential methods resulted in high loadings of 114 and 122 mg/g of support, respectively. Sequential co-immobilization of these enzymes proved more beneficial for higher conversion than mixed co-immobilization because of better retaining Nox residual activity. Sequentially co-immobilized enzymes showed a high relative conversion yield with broader pH, temperature, and storage stability profiles than the controls, along with high reusability. To the best of our knowledge, this is the first report on the mixed or sequential co-immobilization of LAD and Nox on magnetic nanoparticles for l-xylulose production. This finding suggests that selecting a sequential co-immobilization strategy is more beneficial than using individual or mixed co-immobilized enzymes on magnetic nanoparticles for enhancing conversion applications.

Asunto(s)

RESUMEN

The emergence of multidrug resistance and increased pathogenicity in microorganisms is conferred by the presence of highly synchronized cell density dependent signalling pathway known as quorum sensing (QS). The QS hierarchy is accountable for the secretion of virulence phenotypes, biofilm formation and drug resistance. Hence, targeting the QS phenomenon could be a promising strategy to counteract the bacterial virulence and drug resistance. In the present study, artocarpesin (ACN), a 6-prenylated flavone was investigated for its capability to quench the synthesis of QS regulated virulence factors. From the results, ACN showed significant inhibition of secreted virulence phenotypes such as pyocyanin (80%), rhamnolipid (79%), protease (69%), elastase (84%), alginate (88%) and biofilm formation (88%) in opportunistic pathogen, Pseudomonas aeruginosa PAO1. Further, microscopic observation of biofilm confirmed a significant reduction in biofilm matrix when P. aeruginosa PAO1 was supplemented with ACN at its sub-MIC concentration. Quantitative gene expression studies showed the promising aspects of ACN in down regulation of several QS regulatory genes associated with production of virulence phenotypes. Upon treatment with sub-MIC of ACN, the bacterial colonization in the gut of Caenorhabditis elegans was potentially reduced and the survival rate was greatly improved. The promising QS inhibition activities were further validated through in silico studies, which put an insight into the mechanism of QS inhibition. Thus, ACN could be considered as possible drug candidate targeting chronic microbial infections.

Asunto(s)

RESUMEN

The total rate of plastic production is anticipated to surpass 1.1 billion tons per year by 2050. Plastic waste is non-biodegradable and accumulates in natural ecosystems. In 2020, the total amount of plastic waste was estimated to be 367 million metric tons, leading to unmanageable waste disposal and environmental pollution issues. Plastics are produced from petroleum and natural gases. Given the limited fossil fuel reserves and the need to circumvent pollution problems, the focus has shifted to biodegradable biopolymers, such as polyhydroxyalkanoates (PHAs), polylactic acid, and polycaprolactone. PHAs are gaining importance because diverse bacteria can produce them as intracellular inclusion bodies using biowastes as feed. A critical component in PHA production is the downstream processing procedures of recovery and purification. In this review, different bioengineering approaches targeted at modifying the cell morphology and synchronizing cell lysis with the biosynthetic cycle are presented for product separation and extraction. Complementing genetic engineering strategies with conventional downstream processes, these approaches are expected to produce PHA sustainably.

RESUMEN

Type III polyketide synthases (type III PKSs) are single homodimeric enzymes that produce diverse products such as phloroglucinol, pyrones, resorcinols and chalcones which are biotechnologically important molecules. In an attempt to identify new type III PKS from extreme environments, the deep-sea sediment metagenome from Bay of Bengal was screened for type III PKS genes. BLASTX analyses of Nanopore sequence derived metagenome with the in-house created PKS database revealed a full length type III PKS from a 5 kb fragment. The annotated full length type III PKS, S9PKS showed 25-30 % sequence identity towards previously characterized enzymes. To functionally characterize the gene, it was synthesized, cloned into pET28a and pColdI vectors under T7 and csp promoters, respectively, and expressed in Escherichia coli Rosetta(DE3) pLysS. The optimized PKS (OptiPKS) was expressed as inclusion bodies under both promoters. The inclusion bodies were successfully solubilised using low concentration of urea, refolded and purified using Ni-NTA Agarose resin. The purified OptiPKS was tested for functionality using fatty acyl-CoA substrates at various temperatures. High performance liquid chromatography (HPLC) analyses revealed that OptiPKS produced tri and tetraketide pyrones using C4 to C10 acyl-CoA starter substrates. Further characterization and mutation of the enzyme would reveal its functional significance. Thus, the study could be a lead for the annotation and functional characterization of putative type III PKS from environmental metagenome data.

Asunto(s)

RESUMEN

OBJECTIVE: Assembly and construction of resveratrol production pathway in Saccharomyces cerevisiae for denovo production of resveratrol using seaweed extract as fermentation medium. RESULTS: Genes involved in the production of resveratrol from tyrosine pathway, tyrosine ammonia lyase (FTAL) gene from Flavobacterium johnsoniae (FjTAL), the 4-coumarate:CoA ligase gene from Arabidopsis thaliana (4CL1) and the stilbene synthase gene from Vitis vinifera (VvSTS) were introduced into low copy, high copy and integrative vector and transformed into S. cerevisiae W303-1a. The resulting strains W303-1a/pARS-res5, W303-1a/2µ-res1 and W303-1a/IntUra-res9 produced a level of 2.39 ± 0.01, 3.33 ± 0.03 and 8.34 ± 0.03 mg resveratrol l-1 respectively. CRISPR mediated integration at the δ locus resulted in 17.13 ± 1.1 mg resveratrol l-1. Gracilaria corticata extract was tested as a substrate for the growth of transformant to produce resveratrol. The strain produced a comparable level, 13.6 ± 0.54 mg resveratrol l-1 when grown in seaweed extract medium. CONCLUSIONS: The strain W303-1a/IntδC-res1 utilized Gracillaria hydrolysate and produced 13.6 ± 0.54 mg resveratrol l-1 and further investigations are being carried out focusing on pathway engineering and optimization of process parameters to enhance resveratrol yield.

Asunto(s)

RESUMEN

The production of renewable energy or biochemicals is gaining more attention to minimize the emissions of greenhouse gases such as methane (CH4) and carbon dioxide for sustainable development. In the present study, the influence of copper (Cu)- and iron (Fe)-based nanoparticles (NPs), such as Cu, Fe3O4, and CuFe2O4, was evaluated during the growth of methanotrophs for inoculum preparation and on the development of a polymeric-matrix-based encapsulation system to enhance methanol production from simulated biogas (CH4 and CO2). The use of simulated biogas feed and the presence of NP-derived inoculums produce a remarkable enhancement in methanol production up to 149% and 167% for Methyloferula stellata and Methylocystis bryophila free-cells-based bioconversion, respectively, compared with the use of pure CH4 as a control feed during the growth stage. Furthermore, these methanotrophs encapsulated within a polymeric matrix and NPs-based systems exhibited high methanol production of up to 156%, with a maximum methanol accumulation of 12.8 mmol/L over free cells. Furthermore, after encapsulation, the methanotrophs improved the stability of residual methanol production and retained up to 62.5-fold higher production potential than free cells under repeated batch reusability of 10 cycles. In the presence of CH4 vectors, methanol production by M. bryophila improved up to 16.4 mmol/L and retained 20% higher recycling stability for methanol production in paraffin oil. These findings suggest that Cu and Fe NPs can be beneficially employed with a polymeric matrix to encapsulate methanotrophs and improve methanol production.

RESUMEN

Bacteria that cause infectious diseases adopt biofilms as one of their most prevalent lifestyles. Biofilms enable bacteria to tolerate environmental stress and evade antibacterial agents. This bacterial defense mechanism has rendered the use of antibiotics ineffective for the treatment of infectious diseases. However, many highly drug-resistant microbes have rapidly emerged owing to such treatments. Different signaling mechanisms regulate bacterial biofilm formation, including cyclic dinucleotide (c-di-GMP), small non-coding RNAs, and quorum sensing (QS). A cell density-dependent phenomenon, QS is associated with c-di-GMP (a global messenger), which regulates gene expression related to adhesion, extracellular matrix production, the transition from the planktonic to biofilm stage, stability, pathogenicity, virulence, and acquisition of nutrients. The article aims to provide information on inhibiting biofilm formation and disintegrating mature/preformed biofilms. This treatment enables antimicrobials to target the free-living/exposed bacterial cells at lower concentrations than those needed to treat bacteria within the biofilm. Therefore, a complementary action of antibiofilm and antimicrobial agents can be a robust strategic approach to dealing with infectious diseases. Taken together, these molecules have broad implications for human health.

Asunto(s)

RESUMEN

In this study, a bio-friendly inorganic protein hybrid-based enzyme immobilization system using partially purified Coriolus versicolor laccase (CvLac) was successfully applied to biomass hydrolysis for the enhancement of sugar production aimed at generating biofuels. After four days of incubation, the maximum CvLac production was achieved at 140 U/mg of total protein in the presence of inducers such as copper and wheat bran after four days of incubation. Crude CvLac immobilized through inorganic protein hybrids such as nanoflowers (NFs) using zinc as Zn3(PO4)2/CvLac hybrid NFs (Zn/CvLac-NFs) showed a maximum encapsulation yield of 93.4% and a relative activity of 265% compared to free laccase. The synthesized Zn/CvLac-NFs exhibited significantly improved activity profiles and stability compared to free enzymes. Furthermore, Zn/CvLac-NFs retained a significantly high residual activity of 96.2% after ten reuse cycles. The saccharification of poplar biomass improved ∼2-fold in the presence of Zn/CvLac-NFs, with an 8-fold reduction in total phenolics compared to the control. The Zn/CvLac-NFs treated biomass hydrolysate showed high biological hydrogen (H2) production and ethanol conversion efficiency of up to 2.68 mol/mol of hexose and 79.0% compared to the control values of 1.27 mol of H2/mol of hexose and 58.4%, respectively. The CvLac hybrid NFs are the first time reported for biomass hydrolysis, and a significant enhancement in the production of hydrogen and ethanol was reported. The synthesis of such NFs based on crude forms of diverse enzymes can potentially be extended to a broad range of biotechnological applications.

RESUMEN

Polyhydroxyalkanoates (PHA) are biodegradable plastic. Numerous bacteria produce PHAs under environmental stress conditions, such as excess carbon-rich organic matter and limitations of other nutritional elements such as potassium, magnesium, oxygen, phosphorus, and nitrogen. In addition to having physicochemical properties similar to fossil-fuel-based plastics, PHAs have unique features that make them ideal for medical devices, such as easy sterilization without damaging the material itself and easy dissolution following use. PHAs can replace traditional plastic materials used in the biomedical sector. PHAs can be used in a variety of biomedical applications, including medical devices, implants, drug delivery devices, wound dressings, artificial ligaments and tendons, and bone grafts. Unlike plastics, PHAs are not manufactured from petroleum products or fossil fuels and are, therefore, environment-friendly. In this review, a recent overview of applications of PHAs with special emphasis on biomedical sectors, including drug delivery, wound healing, tissue engineering, and biocontrols, are discussed.

RESUMEN

In conventional, the biologically treated tannery wastewaters are rich in dissolved organics and the application of reverse osmosis (RO) to biologically treated tannery wastewater was challenged with fouling and failure of RO membrane due to existence of lingering dissolved organic compounds. In present investigation the bacterial cell immobilized packed bed reactor (CIPBR) was operated to remove the dissolved organic compounds in biologically treated post-tanning wastewater to avoid membrane fouling in RO. The efficient microbial syndicate to eliminate dissolved organics in post-tanning wastewater was isolated and immobilized on to the carbon silica matrix (CSM) in the range of 2.98 ± 0.2 × 107 cells gm-1 of CSM and the same was used as a carrier matrix in the packed bed reactor. The CIPBR established the CODtot, CODdis and BOD removal efficiency by 61 ± 4%, 57 ± 4% and 87 ± 3% respectively with CODtot, CODdis and BOD remained in the treated wastewater as 236 ± 21 mg/L, 228 ± 21 mg/L, and 12 ± 3 mg/L under continuous operation. The removal of dissolved organic compounds from the post-tanning wastewater was confirmed using UV-Visible and FT-IR spectroscopic studies. Among the total microbial community, the phylum Proteobacteria played most abundant role with 48.47% of relative abundance for the removal of dissolved organics in biologically treated post-tanning wastewater. The significance of the study is to replace the tertiary treatment unit operation in the conventional ETP/CETP to remove dissolved organics in wastewater.

Asunto(s)

RESUMEN

Laccase activity is influenced by copper (Cu) as an inducer. In this study, laccase was immobilized on Cu and Cu-magnetic (Cu/Fe2O4) nanoparticles (NPs) to improve enzyme stability and potential applications. The Cu/Fe2O4 NPs functionally activated by 3-aminopropyltriethoxysilane and glutaraldehyde exhibited an immobilization yield and relative activity (RA) of 93.1 and 140%, respectively. Under optimized conditions, Cu/Fe2O4 NPs showed high loading of laccase up to 285 mg/g of support and maximum RA of 140% at a pH 5.0 after 24 h of incubation (4°C). Immobilized laccase, as Cu/Fe2O4-laccase, had a higher optimum pH (4.0) and temperature (45°C) than those of a free enzyme. The pH and temperature profiles were significantly improved through immobilization. Cu/Fe2O4-laccase exhibited 25-fold higher thermal stability at 65°C and retained residual activity of 91.8% after 10 cycles of reuse. The degradation of bisphenols was 3.9-fold higher with Cu/Fe2O4-laccase than that with the free enzyme. To the best of our knowledge, Rhus vernicifera laccase immobilization on Cu or Cu/Fe2O4 NPs has not yet been reported. This investigation revealed that laccase immobilization on Cu/Fe2O4 NPs is desirable for efficient enzyme loading and high relative activity, with remarkable bisphenol A degradation potential.

Asunto(s)

RESUMEN

Biowaste-derived sugars or greenhouse gases, such as methane (CH4) and carbon dioxide (CO2), can be used to generate eco-friendly biofuels, such as hydrogen (H2) or methanol. In the present study, enzyme-based rice straw (RS) hydrolysate was used to produce dark-fermentative (DF) biogas (H2 and CO2), which was subsequently integrated with biogas (CH4 and CO2) derived from anaerobic digestion (AD) to generate methanol via methanotrophs. First, DF of RS hydrolysate yielded 2.82 mol of H2/mol of hexose. Second, the integration of biogas derived from DF and AD in the presence of CH4 vectors yielded 13.8 mmol/L of methanol via methanotrophs. Moreover, under the repeated batch mode, 64.6 mmol/L of methanol was produced. This is the first report on the integration of biogas derived from AD and DF of biowaste to produce biomethanol. These findings may facilitate the development of a sustainable biowaste-based circular economy for producing biofuels.

Asunto(s)

RESUMEN

Bioactive molecules of microbial origin are finding increasing biotechnological applications. Their sources range from the terrestrial, marine, and endophytic to the human microbiome. These biomolecules have unique chemical structures and related groups, which enable them to improve the efficiency of the bioprocesses. This review focuses on the applications of biomolecules in bioremediation, agriculture, food, pharmaceutical industries, and human health.

RESUMEN

The large-scale usage of petro-chemical-based plastics has proved to be a significant source of environmental pollution due to their non-biodegradable nature. Microbes-based enzymes such as esterases, cutinases, and lipases have shown the ability to degrade synthetic plastic. However, the degradation of plastics by enzymes is primarily limited by the unavailability of a robust enzymatic system, i.e., low activity and stability towards plastic degradation. Recently, the machine learning strategy involved structure-based and deep neural networks show desirable potential to generate functional, active stable, and tolerant polyethylene terephthalate (PET) degrading enzyme (FAST-PETase). FAST-PETase showed the highest PET hydrolytic activity among known enzymes or their variants and degraded broad ranges of plastics. The development of a closed-loop circular economy-based system of plastic degradation to monomers by FAST-PETase followed by the re-polymerization of monomers into clean plastics can be a more sustainable approach. As an alternative to synthetic plastics, diverse microbes can produce polyhydroxyalkanoates, and their degradation by microbes has been well-established. This article discusses recent updates in the enzymatic degradation of plastics for sustainable development.