RESUMEN

A new reversed-phase high performance liquid chromatography method has been developed and validated for the quantitative determination of lysine clonixinate salt in water/oil microemulsions. The mobile phase was acetonitrile-buffer phosphate pH 3.3. Detection was UV absorbance at 252 nm. The precision and accurately of the method were excellent. The established linearity range was 5-60 microg ml(-1) (r(2)=0.999). Microemulsions samples were dispersed with chloroform and extracted lysine clonixinate salt with water. This easy method employing chloroformic extraction has been done three times. The recovery of lysine clonixinate salt from spiked placebo and microemulsion were >90% over the linear range.

Asunto(s)

RESUMEN

The effects of two common diluents (microcrystalline cellulose and calcium phosphate dihydrate), two binding agents (gelatin and methacrylic polymer), and spheronization on the micromeritic (size, shape, density), flow, and packing properties of sodium diclofenac pellets were examined. The shape was assessed as the aspect ratio and was correlated to the flow rate and to the deviation of the tapped porosity from the value of 26%, which corresponds to the ideal rhombohedral packing of spheres. It was found that porosity deviation decreased greatly with spheronization, but it increased with hinder addition. Porosity deviation was proportional to the aspect ratio, while flow rate decreased logarithmically with porosity deviation. Porosity deviation may be a useful index for monitoring the quality of pellets, similar to the aspect ratio, as a successful, simple, and indirect indication of sphericity and of surface roughness as well.

Asunto(s)

RESUMEN

There has been growing interest in the subject of drug delivery and the design and evaluation of controlled-release systems. The simplest way to control the release of an active agent is to disperse it in an inert polymeric matrix. Controlled-release systems are of interest because they are technologically simple, relatively cheap, and practically unaffected by physiological changes. In this study, a new matrix system was formed by an active principle, metoclopramide hydrochloride, scattered into a biocompatible hydrophobic polymerical mesh, polyamide 12, to achieve sustained and controlled delivery of metoclopramide hydrochloride. This research was conducted to investigate the in vitro drug release behavior from these new inert polymeric matrix tablets. The drug release process was investigated both experimentally and by means of mathematical models. Different models were applied for the evaluation of drug release data. On the basis of our results, a biexponential equation was proposed, Q=Qfast(1)(1 - e(-Kfast t)) + Qslow(2)(1 - e(-Kslow t)), in an attempt to explain the mechanism responsible for the release process. Additionally, the influence of the experimental conditions of the dissolution devices, such as rate of flow and pH of dissolution medium, on the parameters that characterize the release mechanism was studied, and it was found that the main factor was the hydrodynamic condition of rate of flow.

Asunto(s)

RESUMEN

A first-derivative spectrophotometric (1D(387)) method was developed for the determination of nifedipine in oil/water/oil (O/W/O) multiple microemulsions during stability studies. The UV first-derivative spectra were recorded over the wavelength range 200-600 nm (Delta lambda=16). The derivative procedure was based on the linear relationship between nifedipine concentration and the first-derivative amplitude at 387 nm. This method was validated and compared with a liquid chromatography (LC) procedure used for the quantitative analysis of the drug. Both methods showed excellent precision and accuracy with values of 2.09 and 1.82%, respectively, for the LC method and of 1.53 and 1.64%, respectively, for the 1D(387) method. The established linearity range was 5-30 microg ml(-1) with r(2) values of 0.9980 and 0.9988 for LC and first-derivative procedures, respectively. Nifedipine recoveries from spiked placebos were >95% for both methods over the linear range analysed. These methods have been successfully used for determining of nifedipine content of multiple microemulsions during stability studies, since there was no interference with its decomposition products.

Asunto(s)

RESUMEN

The release of nortritptyline hydrochloride from oil-in-water (o/w) microemulsions (isopropyl myristate as oil, propylene glycol as cosurfactant, polysorbate 80 as surfactant and phosphate buffer, pH 7.4, as the continuous phase) containing increasing concentrations of polyethylene glycol 400, used to facilitate the diffusion of a drug from the inner oily phase of the microemulsion to the outer aqueous phase of such a dispersion system, was studied by determining the permeability constants of the drug through hydrophilic and lipophilic membranes separating the o/w microemulsions from the receiving aqueous phase (phosphate buffer pH 7.4). The permeability of nortriptyline hydrochloride from microemulsions through the lipophilic membrane increased as the concentration of polyethylene glycol 400 in the disperse system increased. The apparent permeability constant for nortriptyline hydrochloride, from the microemulsion without polyethylene glycol, was 1.36 x 10(-3) cm x h(-1), it increased up to 7.80 x 10(-3) cm x h(-1) in the presence of polyethylene glycol at a concentration of 50% (v/v) of the initial volume of the aqueous phase.

Asunto(s)

RESUMEN

The objective of this work is to study the interaction of a copolymer, poly methyl vinyl ether/maleic anhydride (PMV/MA) used in pharmaceutical dosage form and a phospholipid L-alpha-dimiristoyl phosphatidylcholine (DMPC) with the aim of developing a bioadhesive system. Glycerine is the plastifiant used to make PMV/MA insoluble. We have studied copolymer-plastifiant compatibility with differential scanning calorimetry and we have studied the influence that the solvents produce on the copolymer by infrared spectroscopy. Monolayer experiments were carried out with a Wilhelmy-type surface balance. The purpose of these experiments is to obtain molecular information about interaction PMV/MA-glycerine system with DMPC. The results show that there are attractive forces and it is a spontaneous process.

Asunto(s)

RESUMEN

A new rapid, reliable and specific UV spectrophotometric method was developed for the determination of nortriptyline hydrochloride formulated into o/w microemulsions. The UV spectra of nortriptyline standard solution in methanol and placebo (microemulsion without nortriptyline) were recorded over the wavelength range 200-600 nm and the spectra for placebo and nortriptyline loaded microemulsion were recorded over the range 260-400 nm in order to determine the overlapping that might appears, and hence to set the wavelength that could be used for the quantitative analysis. This method was validated and compared with a liquid chromatography (LC) procedure used for the quantitative analysis of the drug. Both methods showed excellent precision and accuracy with RSD values of 2.37 and 1.41%, respectively, for the LC method, and values of 1.24 and 2.88%, respectively, for the UV spectrophotometric method. The established linearity range was 10-50 microg ml(-1) (r2 = 0.9985) and 20-60 microg ml(-1) (r2 = 0.9979) for the HPLC and UV spectrophotometric methods respectively. The recoveries of nortriptyline from spiked placebos were > 95% for both methods over the linear range. The methods have been successfully used for determining the nortriptyline content of microemulsions and for evaluating the chemical stability of the drug in nortriptyline-loaded microemulsions.

Asunto(s)

RESUMEN

Albendazole (ABZ), mebendazole (MBZ), and ricobendazole (RBZ) are low-soluble anthelmintic benzimidazole carbamate drugs. To increase their aqueous solubility, three different types of beta-cyclodextrins (CyDs): beta-cyclodextrin (CD), hydroxypropyl-beta-cyclodextrin (HPCD), and methyl-beta-cyclodextrin (MCD) were used. Solubility depended on the type of CyDs. Increased solubility was obtained when the more substituted CyDs (HPCD or MCD) were used instead of nonsubstituted CD. Stability constants were calculated assuming a 1:1 stoichiometry. Calculated stability constant values depended on initial solubility of drug and pH of the medium. Solid ABZ complexes were prepared by coprecipitation and freeze-drying methods. These products were compared with physical mixtures of ABZ and CyDs. The characterization of these products was made by differential scanning calorimetry (DSC) and drug release studies. True inclusion complexes were obtained only by the freeze-drying method. Drug release studies showed that the freeze-dried inclusion complexes increased the solubility rate of ABZ, although a supersaturation effect was observed when drug release studies were performed in nonsink conditions. A bioavailability study on mice was done with a formulation of ABZ:HPCD complex and was compared to a conventional ABZ suspension. A significantly (p < .05) shorter Tmax of absorption was obtained by using the complex formulation. Greater and significant (p < .05) differences for AUC and Cmax were observed.

Asunto(s)

RESUMEN

A first derivative spectrophotometric method was developed for the determination of omeprazole in aqueous solutions during stability studies. The derivative procedure was based on the linear relationship between the omeprazole concentration and the first derivative amplitude at 313 nm. The first derivative spectra was developed between 200 and 400 nm (deltalambda = 8). This method was validated and compared with the official high-performance liquid chromatography (HPLC) method of the USP. It showed good linearity in the range of concentrations studied (10-30 microg ml(-1)), precision (repeatability and inter-day reproducibility), recovery and specificity in stability studies. It also seemed to be 2.59 times more sensitive than the HPLC method. These results allowed to consider this procedure as useful for the rapid analysis of omeprazole in stability studies since there was no interference with its decomposition products.

Asunto(s)

Asunto(s)

Asunto(s)

Asunto(s)