RESUMEN
Hydrogen storage for energy applications is of significant interest to researchers seeking to enable a transition to lower-pollution energy systems. Two of the key drawbacks of using hydrogen for energy storage are the low gas-phase storage density and the high energy cost of the gas-phase compression. Metal hydride materials have the potential to increase hydrogen storage density and decrease the energy cost of compression by storing the hydrogen as a solid solution. In this article, the technical viability of core-shell V90Al10-Pd80Ag20 as a hydrogen storage material is discussed. LaNi5, LaNi5/acrylonitrile-butadiene-styrene copolymer mixtures, core-shell V-Pd, and core-shell V90Al10-Pd80Ag20 are directly compared in terms of reversible hydrogen-storage content by weight and volume. The kinetic information for each of the materials is also compared; however, this work highlights missing information that would enable computational dynamics modelling. Results of this technical evaluation show that V90Al10-Pd80Ag20 has the potential to increase gravimetric and volumetric hydrogen capacity by 1.4 times compared to LaNi5/acrylonitrile-butadiene-styrene copolymer mixtures. In addition, the literature shows that Pd80Ag20 and V90Al10 both have similarly good hydrogen permeabilities, thermal conductivities, and specific heats. In summary, this evaluation demonstrates that core-shell V90Al10-Pd80Ag20 could be an excellent, less-expensive hydrogen storage material with the advantages of improved storage capacity, handleability, and safety compared to current AB5-polymer mixtures.
RESUMEN
Over the last three decades, the protocols and procedures of the DNA amplification technique, polymerase chain reaction (PCR), have been optimized and well developed. However, there have been no significant innovations in processes for sample dispersion for PCR that have reduced the amount of single-use or unrecyclable plastic waste produced. To address the issue of plastic waste, this paper reports the synthesis and successful use of a core-shell bead microreactor using photopolymerization of a composite liquid marble as a dispersion process. This platform uses the core-shell bead as a simple and effective sample dispersion medium that significantly reduces plastic waste generated compared to conventional PCR processes. Other improvements over conventional PCR processes of the novel dispersion platform include increasing the throughput capability, enhancing the performance and portability of the thermal cycler, and allowing for the contamination-free storage of samples after thermal cycling.
RESUMEN
A novel inorganic proton exchange membrane based on phosphoric acid (PA)-functionalized sintered mesoporous silica, PA-meso-silica, has been developed and investigated. After sintering at 650 °C, the meso-silica powder forms a dense membrane with a robust and ordered mesoporous structure, which is critical for retention of PA and water within the porous material. The PA-meso-silica membrane achieved a high proton conductivity of 5 × 10(-3) to 5 × 10(-2) S cm(-1) in a temperature range of 80-220 °C, which is between 1 and 2 orders of magnitudes higher than a typical membrane Nafion 117 or polybenzimidazole (PBI)/PA in the absence of external humidification. Furthermore, the PA-meso-silica membranes exhibited good chemical stability along with high performance at elevated temperatures, producing a peak power density of 632 mW cm(-2) using a H2 fuel at 190 °C in the absence of external humidification. The high membrane proton conductivity and excellent fuel cell performance demonstrate the utility of PA-meso-silica as a new class of inorganic proton exchange membranes for use in the high-temperature proton exchange membrane fuel cells (PEMFCs).
RESUMEN
An inorganic proton exchange membrane based on sintered mesoporous silica and phosphoric acid was developed with a high proton conductivity of 0.06 S cm(-1) at 200 °C, achieving an excellent power output of 689 mW cm(-2) in H2 at 190 °C and 200 mW cm(-2) in methanol at 200 °C with no external humidification.
Asunto(s)
Ácidos Fosfóricos/química , Dióxido de Silicio/química , Espectroscopía Dieléctrica , Conductividad Eléctrica , Electrólitos/química , Metanol/química , Porosidad , Protones , TemperaturaRESUMEN
A nitrate ion-selective electrode (ISE) employing a permeable tubular membrane impregnated with a conventional ISE cocktail has been used successfully in the coulometric analysis of nitrate in fresh waters. The liquid ISE membrane comprising a nitrate ionophore [tridodecylmethylammonium nitrate (TDMAN)], lipophilic electrolyte [tetradodecyl-ammoniumtetrakis(4-chlorophenyl)borate (ETH 500)] and plasticizer [bis(3-ethyl-hexyl)sebacate (DOS)] was supported on a porous polypropylene tube. Coulometric analysis with the tubular membrane ISE showed that nitrate could be detected in the range 10-100 µM with a precision of 2.3% relative standard deviation (RSD), limit of detection of 1.1 µM and relative accuracy of 4.4% compared to a certified reference material (CRM) Lake sample.