RESUMEN
The utilization of renewable and functional group enriched nano-lignin as bio-additve in fabricating composite has become the focus of attention worldwide. Herein, lignin nanoparticles in the form of hollow spheres with the diameter of the order of 138⯱â¯39â¯nm were directly prepared from agro-industrial waste (palm kernel shell) using recyclable tetrahydrofuran in an acidified aqueous system without any chemical modification steps. We then fabricated a new chitosan/nano-lignin composite material as highly efficient sorbent, as demonstrated by efficient removal (~83%) of methylene blue (MB) dye under natural pH conditions. The adsorption process obeyed pseudo-second-order kinetics and adequate fitting of the adsorption data using Langmuir model suggested a monolayer adsorption with a maximum adsorption capacity of 74.07â¯mgâ¯g-1. Moreover, thermodynamic study of the system revealed spontaneous and endothermic nature of the sorption process. Further studies revealed that chitosan composite with nano-lignin showed better performance in dye decontamination compared to native chitosan and chitosan/bulk lignin composite. This could essentially be attributed to synergistic effects of size particularity (nano-effect) and incorporated functionalities due to lignin nanoparticles. Recyclability study performed in four repeated adsorption/regeneration cycles revealed recyclable nature of as-prepared composite, whilst adsorption experiments using spiked real water samples indicated recoveries as high as 89%. Based on this study, as-prepared bio-nanocomposite may thus be considered as an efficient and reusable adsorptive platform for the decontamination of water supplies.
Asunto(s)
Quitosano/química , Colorantes/química , Colorantes/aislamiento & purificación , Lignina/química , Contaminantes Químicos del Agua/química , Contaminantes Químicos del Agua/aislamiento & purificación , Agua/química , Adsorción , Concentración de Iones de Hidrógeno , Residuos Industriales , Azul de Metileno/química , Azul de Metileno/aislamiento & purificación , Nanocompuestos/química , Soluciones , Termodinámica , Purificación del AguaRESUMEN
Cellulose nanocrystals were isolated from oil palm trunk by total chlorine free method. The samples were either water pre-hydrolyzed or non-water pre-hydrolyzed, subjected to soda pulping, acidified and ozone bleached. Cellulose and cellulose nanocrystal (CNC) physical, chemical, thermal properties, and crystallinity index were investigated by composition analysis, scanning electron microscopy, transmission electron microscopy, fourier transform infrared, thermogravimetric analysis and X-ray diffraction. Water pre-hydrolysis reduced lignin (<0.5%) and increased holocellulose (99.6%) of ozone-bleached cellulose. Water pre-hydrolyzed cellulose exhibited surface fibrillation and peeling off after acid hydrolysis process compared to non-fibrillated of non-water pre-hydrolyzed cellulose. Water pre-hydrolysis improved final CNC crystallinity (up to 75%) compared to CNC without water pre-hydrolysis crystallinity (69%). Cellulose degradation was found to occur during ozone bleaching stage but CNC showed an increase in crystallinity after acid hydrolysis. Thus, oil palm trunk CNC can be potentially applied in pharmaceutical, food, medical and nanocomposites.
Asunto(s)
Arecaceae/química , Celulosa/química , Celulosa/aislamiento & purificación , Nanopartículas/química , Tallos de la Planta/química , Hidrólisis , Agua/químicaRESUMEN
In this study cellulose nanocrystals were isolated through acid hydrolysis process from parenchyma and vascular bundle of oil palm trunk (Elaeis guineensis). The morphological properties of obtained cellulose nanocrystals were studied by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The microscopy images showed smoother and cleaner surface of parenchyma cellulose nanocrystals when compared to vascular bundle cellulose nanocrystals. The TEM image shows a higher length and diameter for parenchyma cellulose nanocrystals compared to vascular bundle cellulose nanocrystals. The Fourier transform infrared (FTIR) spectra showed changes in functional groups after acid hydrolysis due to removal of lignin, hemicelluloses and other impurities in both type of cellulose nanocrystals. Crystallinity index of cellulose nanocrystals was observed higher for vascular bundle as compared to parenchyma. Thermogravimetric analysis (TGA) was performed to study the thermal stability of cellulose nanocrystals and it was observed higher for parenchyma cellulose nanocrystals compared to vascular bundle.
Asunto(s)
Arecaceae/química , Celulosa/química , Celulosa/aislamiento & purificación , Nanopartículas , Arecaceae/citologíaRESUMEN
In this study cellulose nanocrystals were isolated from oil palm trunk (Elaeis guineensis) using acid hydrolysis method. The morphology and size of the nanocrystals were characterized using scanning electron microscopy and transmission electron microscopy. The results showed that the nanocrystals isolated from raw oil palm trunk (OPT) fibers and hot water treated OPT fibers had an average diameter of 7.67 nm and 7.97 nm and length of 397.03 nm and 361.70 nm, respectively. Fourier Transform Infrared spectroscopy indicated that lignin and hemicellulose contents decreased. It seems that lignin was completely removed from the samples during chemical treatment. Thermogravimetric analysis demonstrated that cellulose nanocrystals after acid hydrolysis had higher thermal stability compared to the raw and hot water treated OPT fibers. The X-ray diffraction analysis increased crystallinity of the samples due to chemical treatment. The crystalline nature of the isolated nanocrystals from raw and hot water treated OPT ranged from 68 to 70%.