RESUMEN

High concentrations of ammonium, phosphate, and phenol are recognized as water pollutants that contribute to the degradation of soil acidity. In contrast, small quantities of these nutrients are essential for soil nutrient cycling and plant growth. Here, we reported composite materials comprising biochar, chitosan, ZrO, and Fe3O4, which were employed to mitigate ammonium, phosphate, and phenol contamination in water and to lessen soil acidity. Batch adsorption experiments were conducted to assess the efficacy of the adsorbents. Initially, comparative studies on the simultaneous removal of NH4, PO4, and phenol using CB (biochar), CBC (biochar + chitosan), CBCZrO (biochar + chitosan + ZrO), and CBCZrOFe3O4 (biochar + chitosan + ZrO + Fe3O4) were conducted. The results discovered that CBCZrOFe3O4 exhibited the highest removal percentage among the adsorbents (P < 0.05). Adsorption data for CBCZrOFe3O4 were well fitted to the second-order kinetic and Freundlich isotherm models, with maximum adsorption capacities of 112.65 mg/g for NH4, 94.68 mg/g for PO4 and 112.63 mg/g for phenol. Subsequently, the effect of CBCZrOFe3O4-loaded NH4, PO4, and phenol (CBCZrOFe3O4-APP) on soil acidity was studied over a 60-day incubation period. The findings showed no significant changes (P < 0.05) in soil exchangeable acidity, H+, Mg, K, and Na. However, there was a substantial increase in the soil pH, EC, available P, CEC, N-NH4, and N-NO3. A significant reduction was also observed in the available soil exchangeable Al and Fe (P < 0.05). This technique demonstrated multi-functionality in remediating water pollutants and enhancing soil acidity.

RESUMEN

During synthetic textile washing, rubbing between fibres or against the washing machine, exacerbated by the elevated temperature, initiates the release of millions of microplastic fibres into the environment. A general tribological strategy is reported that practically eliminates the release of microplastic fibres from laundered apparel. The two-layer fabric finishes combine low-friction, liquidlike polymer brushes with "molecular primers", that is, molecules that durably bond the low-friction layers to the surface of the polyester or nylon fabrics. It is shown that when the coefficient of friction is below a threshold of 0.25, microplastic fibre release is substantially reduced, by up to 96%. The fabric finishes can be water-wicking or water-repellent, and their comfort properties are retained after coating, indicating a tunable and practical strategy toward a sustainable textile industry and plastic-free oceans and marine foodstuffs.

RESUMEN

Textiles with a wicking finish transport moisture away from the skin, such that it is exposed to the environment for fast evaporation, aiding in thermophysiological comfort. Once saturated, such as in highly humid environments or if the wearer dons multiple layers, the efficacy of such a finish is substantially reduced. Here, we develop a new type of fluid transport textile design by combining physical and chemical wettability patterns to transport and remove liquids like sweat. First, a non-toxic, superhydrophobic fabric finish is developed that retains the air permeability of the fabric. Next, two superhydrophobic fabric layers are threaded together, containing wettability channels patterned at the inner/interior side of the fabrics. This design allows for liquid transport through the stitches to the interior channels and keeps both external faces dry. The developed strategy enables directional fluid transport under highly humid conditions, resulting in a ∼20 times faster transport rate than evaporation-based methods. The design principles described here can be used to provide thermophysiological comfort for users in extreme conditions, such as firefighters, law enforcement personnel, and health workers wearing personal protective ensembles.

RESUMEN

Plastics are widely employed in modern civilization because of their durability, mold ability, and light weight. In the recent decade, micro/nanoplastics research has steadily increased, highlighting its relevance. However, contaminating micro/nanoplastics in marine environments, terrestrial ecosystems, and biological organisms is considered a severe threat to the environmental system. Geographical distribution, migration patterns, etymologies of formation, and ecological ramifications of absorption are just a few topics covered in the scientific literature on environmental issues. Degradable solutions from material science and chemistry are needed to address the micro/nanoplastics problem, primarily to reduce the production of these pollutants and their potential effects. Removing micro/nanoplastics from their discharge points has been a central and effective way to mitigate the adverse pollution effects. In this review, we begin by discussing the hazardous effect on living beings and the identification-characterization of micro/nanoplastics. Then, we provide a summary of the existing degradation strategies, which include bio-degradation and advanced oxidation processes (AOPs), and a detailed discussion of their degradation mechanisms is also represented. Finally, a persuasive summary of the evaluated work and projections for the future of this topic is provided.

Asunto(s)

Plásticos , Contaminantes Químicos del Agua , Plásticos/toxicidad , Microplásticos , Ecosistema , Contaminantes Químicos del Agua/análisis , Contaminación Ambiental

RESUMEN

A novel copper-based catalyst supported by a long-chain hydrocarbon stearic acid (Cu x O@C18H36O2) was synthesized by a hydrothermal method and double replacement reactions. The as-prepared catalyst is shown as self-assembled hierarchical nanoflakes with an average size of ∼22 nm and a specific surface area of 51.4 m2 g-1. The catalyst has a good performance on adsorption as well as Fenton-like catalytic degradation of Rhodamine B (RhB). The catalyst (10 mg/L) showed an excellent adsorption efficiency toward RhB (20 mg/L) for pH ranging from 5 to 13, with the highest adsorption rate (99%) exhibited at pH 13. The Fenton-like catalytic degradation reaction of RhB (20 mg/L) by Cu x O@C18H36O2 nanoflakes was effective over a wide range of pH of 3-11, and •OH radicals were generated via Cu2O/H2O2 interactions in acidic conditions and CuO/H2O2 reactions in a neutral solution. The highest efficiency catalytic degradation of RhB (20 mg/L) was 99.2% under acidic conditions (pH = 3, H2O2 = 0.05 M), with an excellent reusability of 96% at the 6th cycle. The results demonstrated that the as-prepared Cu x O@C18H36O2 nanoflakes are an efficient candidate for wastewater treatment, with excellent adsorption capacity and superior Fenton-like catalytic efficiency and stability for RhB.

RESUMEN

This study reports a novel cross-linking approach to fabricate the hydrothermally neutralized silica hydrogel of SiO2-H3BO3-hexadecyltrimethoxysilane by grafting alkylsilane groups onto the nanoporous silica. The synthesized silica hydrogel possessed a large specific surface area of 51.3 m2g-1 and showed excellent dye adsorption capability of cationic dyes in neutral (pH 7) and alkaline (pH 9) medium from wastewater. The colloidal electrokinetic potential analysis revealed that the outstanding adsorption efficiency of cationic dyes over anionic dyes strongly relies on the surface charge of the hydrogels. Moreover, the hydrophobic interactions between the dye molecules and the hydrogels were studied, and it was found that the dye adsorption performance can be tuned by altering the concentration of hydrophobic reagents of the hydrogel. The dye adsorption mechanism was established, and the kinetic study suggested that the adsorption is a pseudo-second-order reaction. Adsorption isotherms at various equilibrium conditions fitted well with the Langmuir isotherm. Therefore, this strongly supports the promising and practical application of the prepared silica hydrogel. The recyclability of the hydrogel was studied, and it showed 90% adsorption efficiency by the regenerated gel up to 6 cycles, which has a high potential in wastewater treatment.

Asunto(s)

Nanoporos , Contaminantes Químicos del Agua , Adsorción , Compuestos Azo , Colorantes , Hidrogeles , Cinética , Dióxido de Silicio , Aguas Residuales

RESUMEN

Limited robustness is a serious drawback for superhydrophobic coatings and degrades the performance of superhydrophobic surfaces in practical applications. Although fluororeagents have excellent durability for superhydrophobicity, their use has been restricted due to various health and environmental concerns. In this work, we describe a facile and efficient fabrication strategy for creating robust fluorine-free superhydrophobic composite coatings that are prepared by a simple dip-dry method, in which the H3BO3-incorporated SiO2-alkyl-silane coatings are deposited on woven cotton fabric surfaces followed by polydimethylsiloxane modification. The coated surface shows a large water contact angle of 157.95 ± 2° and a small sliding hysteresis angle (SHA) of 3.8 ± 0.6°, demonstrating excellent superhydrophobicity. The coated fabric surface also exhibited robustness and durability, withstanding a tape-peeling test (under 48.05 kPa) for around 80 repetitions and sandpaper rubbing (loaded 100 g) for 40 cycles. Furthermore, the coated fabric surface displayed self-healing and oil-water separation capacities. The developed superhydrophobic coatings in this study are robust, environmentally benign, and easy to fabricate, showing promising applications in textile industries.