RESUMEN

Polymerization of 5-n-alkyl-substituted 2-norbornenes synthesized a series of polymers having the same structure of the main polymer chain, but differing in the length of the alkyl substituent (up to 14 methylene units). The obtained polymers were studied by the capillary IGC method as a stationary phase during separation of a mixture of normal hydrocarbons C6-C10. Retention data in the form of a logarithm of the retention factor lnk were correlated with the size of the sorbate (via the carbon number of the alkane ZS) and with the size of the n-alkyl substituent in the polymer chain (via the carbon number of the polymer ZP). Correlation of lnk vs. ZS turned out to be linear for all polymers, but the angle of the slope of linear dependence dlnk/dZS increases with a decrease in the carbon number of the polymer ZP. Dependency of dlnk/dZS vs. ZP is not linear and indicates an increase in the retention of sorbates by the stationary phase with a decrease in the length of the alkyl substituent in the polymer chain. The correlation of the retention of lnk analytes with the carbon number of the polymer ZP is not linear and indicates an increase in the sorbate/sorbent interaction with a decrease in the length of the alkyl substituent. Inflection points were found at both correlations with ZP in the region of ZP = 8, which indicates a possible change in the sorption mechanism or a change in the phase state of the polymer. In polymer chemistry, the phase state of a polymer is characterized by the glass transition temperature Tg, the dependence of which vs. ZP turned out to be nonlinear with an inflection point at ZP ∼11. Thus, a decrease in the length of the alkyl substituent leads to the transition of the polymer from a rubbery state to a glassy one at ZP ∼ 11, which in turn, with a further decrease in the carbon number of the polymer to ZP ∼ 8, causes a change in the sorption mechanism from bulk sorption to surface sorption. The change in the sorption mechanism is accompanied by an increase in the interaction of the sorbate with the stationary phase, which manifests itself both in an increase in the retention time of analytes and in an increase in the enthalpy and entropy of sorption. The reason for this increase can be seen in the formation of a microporous structure in 5-alkyl-substituted polynorbornenes in a glassy state.

Asunto(s)

RESUMEN

Chromatographic determination of the thermodynamic parameters of sorption for light hydrocarbons retention on a stationary phase based on poly [trimethylsilyl (propyn-1)] (PTMSP) was performed and the effect of column preheating at temperatures up to 260°C on the retention of analytes was investigated. It was shown that heating the column to 130°C does not affect the retention of the analytes. At temperatures above 130°C, the gradual decrease of the retention of analytes on PTMSP stationary phase is observed. The process is non-selective and proceeds at the same extent for all the studied hydrocarbons, regardless of the size and geometry of the molecule. Values of enthalpy and entropy of sorption of light hydrocarbons are determined for the original column and after its aging at 200°C. The enthalpy of sorption of the analytes at the PTMSP phase is practically independent on the heating temperature of the PTMSP phase, whereas the loss of entropy increases after heating. The increase of the entropy factor after the heating of the PTMSP stationary phase is associated with its aging and is confirmed by the construction of compensation functions for treated and untreated columns.

RESUMEN

Enthalpy and entropy of adsorption of polar and non-polar solutes were measured by chromatographic technique for new stationary phases prepared from membrane polymers based on tricyclonones. Data obtained within temperature interval from 40 to 150 °C were used to create extrathermodynamic dependences (compensation plots, dependences of enthalpy and entropy changes on solute carbon number). Compensation plots were very similar for all the stationary phases indicating similar adsorption mechanisms. The difference between the stationary phases was elucidated using dependences of enthalpy and entropy changes on solute carbon number. Higher retentivity of the stationary phase based on polymer 1 was explained by higher both enthalpy and entropy of solute adsorption on the stationary phase.

Asunto(s)

RESUMEN

Capacity of AG(S10), a new aerobic acidophilic (growing within the pH range from 1.3 to 4.5 with the optimum at 2.0-2.5) bacterial association from sulfur blocks of the Astrakhan gas-processing complex (AGC), for oxidation of hydrocarbons of various chemical structure was investigated. A broad spectrum of normal (C10-C21) and iso-alkanes, toluene, naphthalene, andphenanthrene, as well as isoprenoids resistant to microbial degradation, pristane and phytane (components of paraffin oil), and 2,2,4,4,6,8,8,-heptamethylnonane, a branched hydrocarbon, were biodegraded under acidic conditions. Microbiological investigation revealed the dominance of mycobacteria in the AGS10 association, which was confirmed by analysis of the 16S rRNA gene clone library. In the phylogenetic tree, the 16S rRNA sequences formed a branch within the cluster of slow-growing mycobacteria, with 98% homology to the closest species Mycobacterium florentinum. Genomic DNA of AG(S10) culture grown on C14-C17 n-alkanes at pH 2.5 was found to contain the genes of two hydroxylase families, alkB and Cyp 153, indicating their combined involvement in hydrocarbon biodegradation. The high hydrocarbon-oxidizing potential of the AGS10 bacterial association, indicated that further search for the genes responsible for degradation of various hydrocarbons in acidophilic mycobacteria could be promising.

Asunto(s)

RESUMEN

Poppe plots were used for analysis of kinetic efficiency of monolithic sorbents synthesized in quartz capillaries for utilization in high-pressure gas chromatography. Values of theoretical plate time and maximum number of theoretical plates occurred to depend significantly on synthetic parameters such as relative amount of monomer in the initial polymerization mixture, temperature and polymerization time. Poppe plots let one to find synthesis conditions suitable either for high-speed separations or for maximal efficiency. It is shown that construction of kinetic Poppe curves using potential Van Deemter data demands compressibility of mobile phase to be taken into consideration in the case of gas chromatography. Model mixture of light hydrocarbons C1 to C4 was then used for investigation of influence of carrier gas nature on kinetic efficiency of polymeric monolithic columns. Minimal values of theoretical plate times were found for CO2 and N2O carrier gases.

Asunto(s)

Asunto(s)

RESUMEN

A novel type of ion exchanger was prepared by multipoint covalent binding of polystyrene chains onto the surface of porous silica followed by polymer-analogous modification of the bonded layer. Both anion and cation exchangers were synthesized and examined in the separation of nucleotides and proteins. Rapid and efficient separation of basic polypeptides on strong anion exchangers and that of acidic polypeptides on strong cation exchangers could be achieved. For the separation of complete mixtures of polypeptides the application of zwitter-ionic ion exchangers can be recommended.

Asunto(s)

RESUMEN

The dissociation constants of the carboxyl groups (pK(a1) = 2.2, n = 1.8) and amino groups (pK(a2) = 9.5, n(2) = 1.6) of a sorbent prepared by reacting l-proline with a cross-linked chloromethylated styrene polymer have been determined by potentiometric titration. The potentiometrically measured stability constants of the Cu(II) complexes of the resin (logbeta(1) = 6.9 and log beta(2) = 12.4) were found to be close to the values for the Cu(II) complexes of N-benzyl-l-proline. For complexed resins of alpha-amino-acid type the pH-values of decomplexation do not appear to be directly correlated with the stability constants.

RESUMEN

By study of the distribution of copper(II) and l-proline (Pro) ions between an aqueous phase and a resin phase with l-proline groupings on a polystyrene matrix (R ), the conditional stability constants of fixed-site R (2) Cu and sorbed R CuPro complexes have been determined and a method for calculation of the constants for alkaline and neutral media is proposed. The values obtained reflect the actual behaviour of the system, and strongly depend on the ph and the ionic strength of the solution in equilibrium with the resin phase. It was established that this dependence and the high values of the conditional constants of complex formation in comparison with the stability constants of low molecular-weight model compounds are due to the donnan distribution of the low molecular-weight participants and to the effect of the electrostatic field of the polyanion. The distribution of the fixed-site ligands on the resin causes considerable differences in the stability of individual fixed-site R Cu complexes and their capacity to enter into reactions with ligands in the aqueous phase.