RESUMEN
This work introduces a formalism for computing external acoustic scattering from phononic crystals (PCs) with arbitrary exterior shape using a Bloch wave expansion technique coupled with the Helmholtz-Kirchhoff integral (HKI). Similar to a Kirchhoff approximation, a geometrically complex PC's surface is broken into a set of facets in which the scattering from each facet is calculated as if it was a semi-infinite plane interface in the short wavelength limit. When excited by incident radiation, these facets introduce wave modes into the interior of the PC. Incorporation of these modes in the HKI, summed over all facets, then determines the externally scattered acoustic field. In particular, for frequencies in a complete bandgap (the usual operating frequency regime of many PC-based devices and the requisite operating regime of the presented theory), no need exists to solve for internal reflections from oppositely facing edges and, thus, the total scattered field can be computed without the need to consider internal multiple scattering. Several numerical examples are provided to verify the presented approach. Both harmonic and transient results are considered for spherical and bean-shaped PCs, each containing over 100 000 inclusions. This facet formalism is validated by comparison to an existing self-consistent scattering technique.
RESUMEN
External scattering from a finite phononic crystal (PC) is studied using the Helmholtz-Kirchhoff integral theorem integrated with a Bloch wave expansion (BWE). The BWE technique is used to describe the internal pressure field of a semi-infinite or layered PC subject to an incident monochromatic plane wave. Following the BWE solution, the Helmholtz-Kirchhoff integral is used to determine the external scattered field. For cubic PCs, the scattered results are compared to numerical treatments in both the frequency and time domain. The presented approach is expected to be valid when the PC size is larger than the acoustic wavelength. However, very good agreement in the spatial beam pattern is also documented for both large and small (with respect to the wavelength) PCs. The result of this work is a fully-analytical, efficient, and verified approach for accurately predicting external scattering from finite, three-dimensional PCs.
RESUMEN
In this paper acoustic wave reflection and transmission are studied at the interface between a phononic crystal (PC) and a homogeneous medium using a Bloch wave expansion technique. A finite element analysis of the PC yields the requisite dispersion relationships and a complete set of Bloch waves, which in turn are employed to expand the transmitted pressure field. A solution for the reflected and transmitted wave fields is then obtained using continuity conditions at the half-space interface. The method introduces a group velocity criterion for Bloch wave selection, which when not enforced, is shown to yield non-physical results. Following development, the approach is applied to example PCs and results are compared to detailed numerical solutions, yielding very good agreement. The approach is also employed to uncover bands of incidence angles whereby perfect acoustic reflection from the PC occurs, even for frequencies outside of stop bands.
RESUMEN
A multi-scale homogenization technique and a finite element-based solution procedure are employed to compute acoustic absorption in smooth and rough packed microtubes. The absorption considered arises from thermo-viscous interactions between the fluid media and the microtube walls. The homogenization technique requires geometric periodicity, which for smooth tubes is invoked using the periodicity of the finite element mesh; for rough microtubes, the periodicity invoked is that associated with the roughness. Analysis of the packed configurations, for the specific microtube radii considered, demonstrates that surface roughness does not appreciably increase the overall absorption, but instead shifts the peaks and values of the absorption curve. Additionally, the effect of the fluid media temperature on acoustic absorption is also explored. The results of the investigation are used to make conclusions about tailored design of acoustically absorbing microtube-based materials.