RESUMEN

Novel strategies are needed to expedite the generation and optimization of peptide probes targeting G protein-coupled receptors (GPCRs). We have previously shown that membrane tethered ligands (MTLs), recombinant proteins comprised of a membrane anchor, an extracellular linker, and a peptide ligand can be used to identify targeted receptor modulators. Although MTLs provide a useful tool to identify and/or modify functionally active peptides, a major limitation of this strategy is the reliance on recombinant protein expression. We now report the generation and pharmacological characterization of prototype peptide-linker-lipid conjugates, synthetic membrane anchored ligands (SMALs), which are designed as mimics of corresponding MTLs. In this study, we systematically compare the activity of selected peptides as MTLs versus SMALs. As prototypes, we focused on the precursor proteins of mature Substance P (SubP) and Cholecystokinin 4 (CCK4), specifically non-amidated SubP (SubP-COOH) and glycine extended CCK4 (CCK4-Gly-COOH). As low affinity soluble peptides these ligands each presented a challenging test case for assessment of MTL/SMAL technology. For each ligand, MTLs and corresponding SMALs showed agonist activity and comparable subtype selectivity. In addition, our results illustrate that membrane anchoring increases ligand potency. Furthermore, both MTL and SMAL induced signaling can be blocked by specific non-peptide antagonists suggesting that the anchored constructs may be orthosteric agonists. In conclusion, MTLs offer a streamlined approach for identifying low activity peptides which can be readily converted to higher potency SMALs. The ability to recapitulate MTL activity with SMALs extends the utility of anchored peptides as probes of GPCR function.

Asunto(s)

RESUMEN

Protein design approaches based on the binary patterning of nonpolar and polar amino acids have been successful in generating native-like protein structures of amphiphilic α-helices or idealized amphiphilic ß-strands in aqueous solution. Such patterning is not possible in the nonpolar environment of biological membranes, precluding the application of conventional approaches to the design of membrane proteins that assemble into discrete aggregates. This review surveys a promising, new strategy for membrane protein design that exploits the unique properties of fluorocarbons-in particular, their ability to phase separate from both water (due to their hydrophobicity) and hydrocarbons (due to their lipophobicity)-to generate membrane protein assemblies. The ability to design such discrete assemblies should enable the disruption of protein-protein interactions and provide templates for novel biomaterials and therapeutics.

Asunto(s)

RESUMEN

This paper describes a biophysical investigation of residual mobility in complexes of bovine carbonic anhydrase II (BCA) and para-substituted benzenesulfonamide ligands with chains of 1-5 glycine subunits, and explains the previously observed increase in entropy of binding with chain length. The reported results represent the first experimental demonstration that BCA is not the rigid, static globulin that has been typically assumed, but experiences structural fluctuations upon binding ligands. NMR studies with (15)N-labeled ligands demonstrated that the first glycine subunit of the chain binds without stabilization or destabilization by the more distal subunits, and suggested that the other glycine subunits of the chain behave similarly. These data suggest that a model based on ligand mobility in the complex cannot explain the thermodynamic data. Hydrogen/deuterium exchange studies provided a global estimate of protein mobility and revealed that the number of exchanged hydrogens of BCA was higher when the protein was bound to a ligand with five glycine subunits than when bound to a ligand with only one subunit, and suggested a trend of increasing number of exchanged hydrogens with increasing chain length of the BCA-bound ligand, across the series. These data support the idea that the glycine chain destabilizes the structure of BCA in a length-dependent manner, causing an increase in BCA mobility. This study highlights the need to consider ligand-induced mobility of even "static" proteins in studies of protein-ligand binding, including rational ligand design approaches.

Asunto(s)

RESUMEN

This paper describes a method for the purification of monoclonal antibodies (rat anti-2,4-dinitrophenyl IgG: IgG(DNP); and mouse antidigoxin IgG: IgG(Dgn)) from ascites fluid. This procedure (for IgG(DNP)) has three steps: (i) precipitation of proteins heavier than immunoglobulins with ammonium sulfate; (ii) formation of cyclic complexes of IgG(DNP) by causing it to bind to synthetic multivalent haptens containing multiple DNP groups; (iii) selective precipitation of these dimers, trimers, and higher oligomers of the target antibody, followed by regeneration of the free antibody. This procedure separates the targeted antibody from a mixture of antibodies, as well as from other proteins and globulins in a biological fluid. This method is applicable to antibodies with a wide range of monovalent binding constants (0.1 microM to 0.1 nM). The multivalent ligands we used (derivatives of DNP and digoxin) isolated IgG(DNP) and IgG(Dgn) from ascites fluid in yields of >80% and with >95% purity. This technique has two advantages over conventional chromatographic methods for purifying antibodies: (i) it is selective for antibodies with two active Fab binding sites (both sites are required to form the cyclic complexes) over antibodies with one or zero active Fab binding sites; (ii) it does not require chromatographic separation. It has the disadvantage that the structure of the hapten must be compatible with the synthesis of bi- and/or trivalent analogues.

Asunto(s)

RESUMEN

BACKGROUND AND PURPOSE: Percutaneous nephrolithotomy (PCNL) is a safe and effective endourologic procedure in patients with renal calculi. It is less morbid than open surgery. However, the patient complains of pain around the nephrostomy tube and demands for good postoperative analgesia. Skin infiltration with bupivacaine around the nephrostomy tube is not effective, so we hypothesize that peritubal infiltration of bupivacaine from renal capsule to the skin along the nephrostomy tract may alleviate postoperative pain. PATIENTS AND METHODS: A randomized controlled study was designed in 40 American Society of Anesthesiologists (ASA) grade I patients to assess the impact of peritubal bupivacaine infiltration with 23-gauge spinal needle along the nephrostomy tract after PCNL under fluoroscopic guidance. Patients were randomized to receive 20 mL of 0.25% bupivacaine in block group (n = 20) or no infiltration in control group (n = 20) at the conclusion of the procedure. Postoperative pain score and analgesic requirement for the first 24 hours were assessed by visual and dynamic visual analog scales second hourly. Rescue analgesia with injection tramadol Hcl 50-100 mg was given intravenously to a maximum total dose of 400 mg when pain score exceeded 4. RESULTS: Pain scores and analgesic requirement for the first 24 hours postoperatively were significantly lesser in the block group than in the control group of patients at all points of time and were statistically significant (p < 0.005). CONCLUSION: In this study a significant difference in the pain scores and analgesic requirement was noted in the two groups of patients. Peritubal infiltration of 0.25% bupivacaine solution is efficient in alleviating postoperative pain after PCNL.

Asunto(s)

Asunto(s)

RESUMEN

This paper describes a calorimetric study of the association of a series of seven fluorinated benzenesulfonamide ligands (C6H(n)F(5-n)SO2NH2) with bovine carbonic anhydrase II (BCA). Quantitative structure-activity relationships between the free energy, enthalpy, and entropy of binding and pKa and log P of the ligands allowed the evaluation of the thermodynamic parameters in terms of the two independent effects of fluorination on the ligand: its electrostatic potential and its hydrophobicity. The parameters were partitioned to the three different structural interactions between the ligand and BCA: the Zn(II) cofactor-sulfonamide bond (approximately 65% of the free energy of binding), the hydrogen bonds between the ligand and BCA (approximately 10%), and the contacts between the phenyl ring of the ligand and BCA (approximately 25%). Calorimetry revealed that all of the ligands studied bind in a 1:1 stoichiometry with BCA; this result was confirmed by 19F NMR spectroscopy and X-ray crystallography (for complexes with human carbonic anhydrase II).

Asunto(s)

RESUMEN

This paper reports dissociation constants and "effective molarities" (M(eff)) for the intramolecular binding of a ligand covalently attached to the surface of a protein by oligo(ethylene glycol) (EG(n)) linkers of different lengths (n = 0, 2, 5, 10, and 20) and compares these experimental values with theoretical estimates from polymer theory. As expected, the value of M(eff) is lowest when the linker is too short (n = 0) to allow the ligand to bind noncovalently at the active site of the protein without strain, is highest when the linker is the optimal length (n = 2) to allow such binding to occur, and decreases monotonically as the length increases past this optimal value (but only by a factor of approximately 8 from n = 2 to n = 20). These experimental results are not compatible with a model in which the single bonds of the linker are completely restricted when the ligand has bound noncovalently to the active site of the protein, but they are quantitatively compatible with a model that treats the linker as a random-coil polymer. Calorimetry revealed that enthalpic interactions between the linker and the protein are not important in determining the thermodynamics of the system. Taken together, these results suggest that the manifestation of the linker in the thermodynamics of binding is exclusively entropic. The values of M(eff) are, theoretically, intrinsic properties of the EG(n) linkers and can be used to predict the avidities of multivalent ligands with these linkers for multivalent proteins. The weak dependence of M(eff) on linker length suggests that multivalent ligands containing flexible linkers that are longer than the spacing between the binding sites of a multivalent protein will be effective in binding, and that the use of flexible linkers with lengths somewhat greater than the optimal distance between binding sites is a justifiable strategy for the design of multivalent ligands.

Asunto(s)

RESUMEN

This paper describes a systematic study of the thermodynamics of association of bovine carbonic anhydrase II (BCA) and para-substituted benzenesulfonamides with chains of oligoglycine, oligosarcosine, and oligoethylene glycol of lengths of one to five residues. For all three of these series of ligands, the enthalpy of binding became less favorable, and the entropy less unfavorable, as the chain length of the ligands increased. The dependence on chain length of the enthalpy was almost perfectly compensated by that of the entropy; this compensation resulted in dissociation constants that were independent of chain length for the three series of ligands. Changes in heat capacity were independent of chain length for the three series and revealed that the amount of molecular surface area buried upon protein-ligand complexation did not increase with increasing chain length. Taken together, these data refute a model in which the chains of the ligands interact hydrophobically with the surface of BCA. To explain the data, a model is proposed based on decreasing "tightness" of the protein-ligand interface as the chain length of the ligand increases. This decreasing tightness, as the chain length increases, is reflected in a less favorable enthalpy (due to fewer van der Waals contacts) and a less unfavorable entropy (due to greater mobility of the chain) of binding for ligands with long chains than for those with short chains. Thus, this study demonstrates a surprising example of enthalpy/entropy compensation in a well-defined system. Understanding this compensation is integral to the rational design of high-affinity ligands for proteins.

Asunto(s)

RESUMEN

This paper describes the application of a bifunctional polyacrylamide (pA-V-F) presenting both vancomycin and fluorescein groups, to modify the surfaces of multiple species of Gram-positive bacteria (Staphylococcus aureus, Staphylococcus epidermidis, Streptococcus pneumoniae, and Enterococcus faecalis) to control molecular recognition of these surfaces. The vancomycin groups allowed the specific recognition of a structural component of the bacterial cell wall: peptides terminated in D-Ala-D-Ala. The fluorescein groups allowed the imaging of binding of polymer to the surfaces of bacteria by fluorescence, and are representative, low molecular weight haptens; their recognition by anti-fluorescein antibodies provides proof-of-principle that bifunctional polymers can be used to introduce haptens onto the surface of the bacteria. Flow cytometry revealed that polymer-labeled S. aureus and S. pneumoniae were opsonized by anti-fluorescein antibodies approximately 20-fold more than were untreated bacteria; nearly all ( approximately 92%) polymer-labeled S. aureus, and a large (76%) fraction of polymer-labeled S. pneumoniae were opsonized. The bound antibodies then promoted phagocytosis of the bacteria by cultured J774 macrophage-like cells. Flow cytometry revealed that macrophages ingested S. aureus decorated with the polymer-antibody complexes approximately 2-fold more efficiently than S. aureus in control groups, in spite of the high background (caused by efficient antibody-independent ingestion of S. aureus by macrophages). This paper, thus, demonstrates the ability of a bifunctional polymer to carry out three distinct functions based on polyvalent molecular recognition: (i) recognition of the surface of Gram-positive bacteria, (ii) modification of this surface to generate specific binding sites recognized by an antibody, and (iii) promotion of phagocytosis of the opsonized bacteria.

Asunto(s)

RESUMEN

The ability to design drugs (so-called 'rational drug design') has been one of the long-term objectives of chemistry for 50 years. It is an exceptionally difficult problem, and many of its parts lie outside the expertise of chemistry. The much more limited problem - how to design tight-binding ligands (rational ligand design) - would seem to be one that chemistry could solve, but has also proved remarkably recalcitrant. The question is 'Why is it so difficult?' and the answer is 'We still don't entirely know'. This perspective discusses some of the technical issues - potential functions, protein plasticity, enthalpy/entropy compensation, and others - that contribute, and suggests areas where fundamental understanding of protein-ligand interactions falls short of what is needed. It surveys recent technological developments (in particular, isothermal titration calorimetry) that will, hopefully, make now the time for serious progress in this area. It concludes with the calorimetric examination of the association of a series of systematically varied ligands with a model protein. The counterintuitive thermodynamic results observed serve to illustrate that, even in relatively simple systems, understanding protein-ligand association is challenging.

Asunto(s)

RESUMEN

Proteins are functional biopolymers; viewed as molecules, they are also monodisperse polyamides with chemically reactive side chains. This paper describes the use of proteins as starting materials for the synthesis of monodisperse polymers with nonbiological functionalities attached to the side chains. It demonstrates the complete derivatization of amine groups (lysine side chains and N-termini) on three different proteins by addition of activated carboxylate reagents in aqueous solutions containing sodium dedecyl sulfate (SDS), under denaturing conditions. Several different acylating reagents were used to generate derivatized proteins; the resulting compounds constitute a new class of monodisperse, semisynthetic polymers, having the potential for wide variation in the structure of the backbone and of the side chains. Modification of lysozyme on a gram scale demonstrated that the method can generate useful quantities of material.

Asunto(s)